1. Танилцуулга
This manual provides detailed instructions for the installation, operation, and maintenance of your Alpine CDE-151 CD/MP3/WMA Receiver. Please read this manual thoroughly before using the unit to ensure proper operation and to prevent damage.
2. Аюулгүй байдлын мэдээлэл
- Эрчим хүчний хангамж: Энэ төхөөрөмж нь 12V DC сөрөг газардуулгын цахилгаан системд зориулагдсан. Тохирох вольтыг шалгана ууtage гэмтлээс урьдчилан сэргийлэх.
- Утас: Connect all wires correctly and securely. Incorrect wiring can cause fire or malfunction. Refer to the wiring diagram carefully.
- Суулгах байршил: Install the unit in a location that does not obstruct the driver's view or interfere with vehicle operation. Avoid locations exposed to direct sunlight, extreme heat, or moisture.
- Дууны түвшин: Do not operate the unit at excessively high volume levels for extended periods, as this may cause hearing damage or distract from driving.
- Салгах: Do not attempt to disassemble or modify the unit. This may result in electric shock, fire, or other accidents. Refer all servicing to qualified personnel.
3. Багцын агуулга
Бүх зүйл багцад байгаа эсэхийг шалгана уу:
- Alpine CDE-151 Head Unit
- Утсан бэхэлгээ
- Ханцуйвч болон обудны цагираг суурилуулах
- Installation Hardware (screws, removal keys)
- Хэрэглэгчийн гарын авлага (энэ баримт бичиг)
4. Суурилуулалт
4.1 утас холболт
Before making any connections, disconnect the vehicle's negative battery terminal to prevent short circuits. Refer to the wiring diagram below for proper connections. Each wire is color-coded for identification.
Figure 1: Rear Panel and Wiring Connections. This image displays the rear of the Alpine CDE-151 receiver, showing the main wiring harness connector, antenna input, and RCA preamp outputs. The color-coded wires of the harness are visible, indicating connections for power, ground, speakers, and accessory functions. Ensure all connections are secure and insulated.
- Шар (Тогтмол хүч): Тээврийн хэрэгслийн 12 вольтын тогтмол тэжээлийн эх үүсвэрт холбогдоно уу.
- Улаан (дагалдах хэрэгсэл): Connect to the vehicle's ignition-switched 12V power supply.
- Хар (газар): Connect to a clean metal chassis point in the vehicle.
- Blue/White (Remote Turn-On): Гадаад залгуурын алсын зайнаас асаах утастай холбогдоно уу ampөргөгч эсвэл цахилгаан антенн.
- Чанга яригч утас: Connect to the corresponding vehicle speaker wires (e.g., White/White-Black for Front Left, Gray/Gray-Black for Front Right, Green/Green-Black for Rear Left, Purple/Purple-Black for Rear Right).
- RCA урьдчилсанamp Гаралт: Гадаад руу холбоно уу amplifiers for front, rear, or subwoofer channels.
4.2 Төхөөрөмжийг суурилуулах
The CDE-151 is a single-DIN unit. Use the supplied mounting sleeve and hardware to secure the unit in the vehicle's dashboard opening. Ensure the unit is firmly seated and does not vibrate. After mounting, attach the trim ring for a finished appearance.
Зураг 2: Хажуу тал View of Receiver Chassis. Энэ зураг нь хажуугийн мэргэжлийн хэсгийг харуулж байнаfile of the Alpine CDE-151 receiver, highlighting the metal chassis with ventilation holes and mounting screw points. This view is useful for understanding the unit's dimensions and how it fits into a standard single-DIN opening.
5. Анхны тохиргоо
After installation, reconnect the vehicle's negative battery terminal. The unit will power on. Follow these steps for initial setup:
- Асаах: дээр дарна уу SOURCE/⑂ төхөөрөмжийг асаах товчлуур.
- Цагийн тохиргоо: Access the setup menu to set the correct time. Refer to the 'System Settings' section for detailed instructions.
- Initial Audio Settings: Adjust basic audio parameters like Bass, Treble, Balance, and Fader to your preference.
6. Ашиглалтын заавар
This section details the functions of the front panel controls and various playback modes.
Зураг 3: Урд самбарын удирдлага. This image displays the front face of the Alpine CDE-151 receiver, highlighting the main rotary encoder, source button, bass button, band button, and preset buttons. The display shows 'BASS ENGINE', indicating an active audio feature. This view is essential for understanding how to operate the unit.
6.1 Үндсэн удирдлага
- Rotary Encoder (Volume Knob): Turn to adjust volume. Press to access audio settings or confirm selections.
- SOURCE/⑂ Button: Press to switch between input sources (CD, USB, AUX, Tuner). Press and hold to turn the unit off.
- BASS товч: Directly access Bass Engine settings for quick bass adjustments.
- Товчлуурын товч: In Tuner mode, press to switch between FM1, FM2, FM3, and AM bands.
- Урьдчилан тохируулсан товчлуурууд (1-6): Store and recall radio stations. In CD/USB mode, these may function as direct track selection or folder navigation.
- Forward/Backward Buttons (◀◀/▶▶): Skip tracks/files or seek radio stations.
6.2 CD тоглуулах
- Insert a CD into the disc slot with the label side up. The unit will automatically load and begin playback.
- Use the ◀◀/▶▶ buttons to skip tracks.
- Press the Rotary Encoder to pause/play.
6.3 USB тоглуулах
- Connect a USB storage device to the front USB input.
- USB-г сонгохын тулд SOURCE товчийг дарна уу.
- Use the ◀◀/▶▶ buttons to navigate tracks. Use the preset buttons for folder navigation if applicable.
- The unit supports MP3 and WMA audio files.
6.4 Туслах оролт
- Connect an external audio device (e.g., smartphone, portable music player) to the front 3.5mm auxiliary input jack.
- Press the SOURCE button to select AUX.
- Холбогдсон төхөөрөмжөөс тоглуулахыг хянана уу.
6.5 Радио тааруулагч
- Press the SOURCE button to select Tuner.
- Press the BAND button to select FM1, FM2, FM3, or AM.
- Use the ◀◀/▶▶ buttons to seek for stations. Press and hold for manual tuning.
- To store a preset: Tune to the desired station, then press and hold one of the preset buttons (1-6) until you hear a beep.
- To recall a preset: Briefly press the desired preset button (1-6).
6.6 Аудио тохиргоо
The CDE-151 features a 3-Band Equalizer and Bass Engine for sound customization.
- Accessing Audio Settings: Press the Rotary Encoder to enter the audio menu. Turn the encoder to navigate through options like Bass, Mid, Treble, Balance, Fader, and Subwoofer level (if connected). Press the encoder to select an option and turn to adjust.
- Bass Engine: Press the BASS button for quick access to bass enhancement features.
7. Засвар үйлчилгээ
- Төхөөрөмжийг цэвэрлэх: Урд талын хавтанг зөөлөн, хуурай даавуугаар арчина. Зүлгүүрийн цэвэрлэгч эсвэл уусгагч хэрэглэж болохгүй.
- Дискний арчилгаа: CD-г ирмэгээр нь барь. Тэдгээрийг цэвэрхэн, зураасгүй байлга.
- USB порт: USB портыг тоос шороо, хог хаягдлаас цэвэр байлга.
8. Алдаа засах
| Асуудал | Шийдэл |
|---|---|
| Хүч чадалгүй | Check power connections (Yellow, Red, Black wires). Ensure vehicle battery is charged. Check vehicle fuses. |
| Дуу алга | Check speaker wire connections. Ensure volume is not muted or too low. Verify amplifier remote turn-on (Blue/White wire) if using external amps. |
| CD/USB тоглуулахгүй байна | Ensure disc is inserted correctly and is not scratched/dirty. For USB, ensure device is formatted correctly (FAT16/32) and contains supported file types (MP3/WMA). |
| Радио хүлээн авалт муу байна | Check antenna connection. Ensure antenna is fully extended (if applicable). Try tuning to a stronger station. |
9. Техникийн үзүүлэлтүүд
- Бүтээгдэхүүний хэмжээ: 9.06 x 3.94 x 10.63 инч
- Барааны жин: 3.1 фунт
- Гаралтын хүч: 50 Watts x 4 Channels (Max), 18 Watts x 4 Channels (RMS)
- Сувгийн тоо: 4
- Холболтын технологи: Туслах, USB
- Онцлог шинж чанар: Equalizer (3-Band EQ, Bass Engine)
- Аудио гаралтын горим: Стерео
- Тохиромжтой төхөөрөмжүүд: Ухаалаг утас, чанга яригч
- Үйлдвэрлэгч: Альпийн
10. Баталгаат хугацаа ба дэмжлэг
For warranty information and customer support, please refer to the warranty card included with your product or visit the official Alpine webсайт. Худалдан авалтын баримтаа баталгаат нэхэмжлэлд зориулж худалдан авалтын баталгаа болгон хадгална уу.
