Танилцуулга
This manual provides essential instructions for the proper installation, maintenance, and troubleshooting of your Genuine Nissan 24080-EA200 Battery Cable Assembly. Please read this manual thoroughly before proceeding with installation to ensure safe and correct usage.
Аюулгүй байдлын мэдээлэл
АНХААРУУЛГА: Working with automotive batteries and electrical systems can be hazardous. Improper handling can lead to severe injury, electric shock, burns, or damage to the vehicle. Always follow these safety precautions:
- Хамгаалалтын шил, бээлий зэрэг хувийн хамгаалалтын хэрэгслийг өмс.
- Тээврийн хэрэгслийн гал асаагуур унтарсан, зогсоолын тоормос татагдсан эсэхийг шалгаарай.
- Disconnect the negative (-) battery terminal first, then the positive (+) terminal. When reconnecting, connect the positive (+) terminal first, then the negative (-) terminal.
- Батерейны хүчилд хүрэхээс зайлсхий. Хэрэв хүрсэн бол нэн даруй усаар зайлж, эмнэлгийн тусламж аваарай.
- Do not smoke or allow open flames near the battery. Batteries produce flammable hydrogen gas.
- Consult a qualified automotive technician if you are unsure about any step.
Багцын агуулга
Суурилуулалт эхлэхээс өмнө бүх бүрэлдэхүүн хэсгүүд байгаа эсэхийг шалгаарай.
- 1 x Genuine Nissan 24080-EA200 Battery Cable Assembly
Image 1: The Genuine Nissan 24080-EA200 Battery Cable Assembly, showing the positive terminal connector, the main cable, and the integrated fuse/junction box.
Суурилуулалт
This section outlines the general procedure for replacing the positive battery cable assembly. Specific vehicle models may have variations. Refer to your vehicle's service manual for detailed instructions.
Шаардлагатай хэрэгслүүд:
- Wrench set (typically 10mm, 12mm, 13mm, 14mm)
- Battery terminal cleaner (wire brush)
- Dielectric grease (optional, for corrosion prevention)
- Хамгаалалтын шил, бээлий
Процедур:
- Машинаа бэлтгэх: Ensure the vehicle is off and the parking brake is engaged. Open the hood and locate the vehicle battery.
- Сөрөг терминалыг салгах: Using an appropriate wrench, loosen the nut on the negative (-) battery terminal. Carefully remove the negative cable and secure it away from the battery to prevent accidental contact.
- Эерэг терминалыг салгах: Loosen the nut on the positive (+) battery terminal. Carefully remove the old positive battery cable assembly.
- Disconnect from Vehicle: Trace the positive battery cable assembly from the battery to its connection points on the vehicle (e.g., starter, fuse box, alternator). Disconnect all attachment points and remove the old assembly. Note the routing for correct reinstallation.
- Цэвэр терминалууд: Use a battery terminal cleaner to remove any corrosion from the battery posts. Ensure a clean, conductive surface.
- Шинэ Ассемблейг суулгах: Carefully route the new Genuine Nissan 24080-EA200 Battery Cable Assembly in the same manner as the old one. Connect all attachment points to the vehicle components, ensuring they are secure.
- Эерэг терминалыг холбох: Attach the new positive (+) battery cable terminal to the positive (+) battery post. Tighten the nut securely, but do not overtighten.
- Сөрөг терминалыг холбох: Attach the negative (-) battery cable terminal to the negative (-) battery post. Tighten the nut securely.
- Apply Dielectric Grease (Optional): Apply a thin layer of dielectric grease to the battery terminals to help prevent corrosion.
- Холболтуудыг баталгаажуулах: Бүх холболтыг нягт, найдвартай эсэхийг шалгахын тулд давхар шалгана уу.
Суулгасны дараах шалгалт
Суулгасны дараа дараах шалгалтуудыг гүйцэтгэнэ.
- Машин эхлүүлэх: Attempt to start the vehicle. If it starts, check for any warning lights on the dashboard.
- Electrical System Check: Verify that all electrical components (lights, radio, power windows, etc.) are functioning correctly.
- Харааны үзлэг: Periodically inspect the battery terminals and cable for any signs of corrosion, looseness, or damage.
Засвар үйлчилгээ
Proper maintenance extends the life of your battery cable assembly and ensures reliable vehicle operation.
- Тогтмол үзлэг: Annually inspect the cable for cracks, fraying, corrosion, or loose connections.
- Цэвэр терминалууд: If corrosion is present, disconnect the battery (negative first, then positive) and clean the terminals and cable ends with a battery terminal brush and baking soda solution (1 tablespoon baking soda to 1 cup water). Rinse with clean water and dry thoroughly before reconnecting.
- Холболтуудыг чангалах: Ensure all connections remain tight. Loose connections can cause poor electrical contact and heat buildup.
Алдааг олж засварлах
| Шинж тэмдэг | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Vehicle does not start or cranks slowly | Loose or corroded battery terminals; faulty battery; other electrical issue | Check and clean battery terminals. Ensure connections are tight. Test battery charge. Consult a technician if issues persist. |
| Electrical components not working | Loose connections; blown fuse in the cable assembly; faulty component | Verify all cable connections are secure. Inspect any integrated fuses within the cable assembly. |
| Зайны терминал дээрх зэврэлт | Battery acid leakage; environmental factors; lack of maintenance | Clean terminals as described in the Maintenance section. Apply dielectric grease. |
| Cable appears damaged (cracked insulation, fraying) | Wear and tear; physical damage | Replace the battery cable assembly immediately to prevent electrical shorts or failures. |
Үзүүлэлтүүд
- Брэнд: Ниссан
- Загварын дугаар: 24080-EA200
- Үйлдвэрлэгчийн хэсгийн дугаар: 24080-EA200
- OEM хэсгийн дугаар: 24080-EA200
- Барааны жин: 9.1 унц
- Багцын хэмжээ: 9.96 x 8.86 x 2.05 инч
- ASIN: B00P2PKCAG
- Эхний боломжтой огноо: 31 оны аравдугаар сарын 2014
Баталгаат болон дэмжлэг
This Genuine Nissan part is typically covered by Nissan's standard parts warranty. For specific warranty details, please refer to the warranty information provided with your purchase or contact an authorized Nissan dealership. For technical support or further assistance, please contact your local Nissan service center or the retailer from whom the part was purchased.
