1. Танилцуулга
This manual provides essential information for the safe and correct installation, operation, and maintenance of your DB Electrical 410-44135 Starter. Please read these instructions thoroughly before attempting any installation or service. Retain this manual for future reference.
2. Аюулгүй байдлын мэдээлэл
Осол гэмтэл, гэмтлээс урьдчилан сэргийлэхийн тулд дараах аюулгүй байдлын арга хэмжээг үргэлж дагаж мөрдөөрэй.
- Disconnect the vehicle's battery before beginning any work on the electrical system to prevent electrical shock or short circuits.
- Аюулгүй байдлын шил, бээлий зэрэг хувийн хамгаалалтын хэрэгсэл (PPE) өмс.
- Ensure the vehicle is on a stable, level surface and properly supported if lifted.
- Тодорхой журам болон эргүүлэх хүчний үзүүлэлтүүдийг тээврийн хэрэгслийнхээ үйлчилгээний гарын авлагаас үзнэ үү.
- Хүүхэд болон зөвшөөрөлгүй хүмүүсийг ажлын талбайгаас хол байлга.
- Энэ бүтээгдэхүүн нь Калифорни мужид хорт хавдар, төрөлхийн гажиг эсвэл нөхөн үржихүйн бусад хор хөнөөл учруулдаг гэж мэдэгдэж буй химийн бодис агуулдаг (65-р саналын анхааруулга). Болгоомжтой харьцаж, харьцсаны дараа гараа угаана уу.
3. Бүтээгдэхүүн дууссанview
The DB Electrical 410-44135 is an aftermarket starter designed to meet OEM specifications for various applications. It is a 12-volt, 9-tooth, 1.2 KW Direct Drive (DD) starter with clockwise rotation.
3.1. Гол бүрэлдэхүүн хэсгүүд
- Соленоид: Engages the starter drive and supplies power to the motor.
- Мотор: Provides rotational force to crank the engine.
- Drive Gear (Pinion): Engages with the engine's flywheel to start the engine.
- Суурилуулах фланц: Secures the starter to the engine block.
3.2. Visual Reference
Зураг 1: Хажуу тал view of the DB Electrical 410-44135 Starter, showing the solenoid, motor, and mounting points.
Зураг 2: Өнцөг view of the starter, highlighting the electrical terminals and rear casing.
4. Тохиромжтой байдал
This starter is compatible with the following vehicle models. Always verify the part fits your specific application before installation.
- Atlas: 404 (1995-1999)
- Форд: 1310 (1983-1986), 1510 (1983-1986), CL25 (1983-1986)
- New Holland: 1310 (1983-1986), 1510 (1983-1986), CL25 (1983-1986)
OEM дугааруудыг орлоно:
- API Marine: 17031
- Arrowhead: SHI0101, 243-12120, S114-381N
- Cargo: 110552
- Ford: SBA18508-6321
- Hitachi: S114-381
- Ishikawajima: 18508-6321
- J & N: 410-44135
- JCB: 02/630500
- Лестер: 17300
- New Holland: SBA18508-6321
- O&K (Orenstein & Koppel): 1447724
- ONAN: 185-2166
- PEL JOB: E185086321
- Perkins: 185086321
- Schaeff INC: 5568656721, 5999999561
- Weidemann: 5747001132, 5747001133, 5747086321
- Zeppelin: 9SX9766
5. Суурилуулалт
Installation of the starter requires mechanical aptitude and basic tools. If you are unsure about any step, consult a qualified mechanic.
- Машинаа бэлтгэх:
- Ensure the vehicle is turned off and the parking brake is engaged.
- Disconnect the negative (-) battery cable first, then the positive (+) battery cable.
- If necessary, lift the vehicle using a jack and secure it with jack stands.
- Хуучин эхлүүлэгчийг олоорой: Identify the existing starter motor on your vehicle. It is typically mounted to the engine block near the transmission.
- Утас салгах:
- Carefully disconnect the main battery cable from the starter solenoid terminal.
- Disconnect the smaller ignition switch wire from the solenoid. Note the position of each wire for correct reinstallation.
- Суурилуулах боолтыг салга: Remove the bolts securing the old starter to the engine block. Support the starter as you remove the last bolt to prevent it from falling.
- Хуучин эхлүүлэгчийг устгах: Carefully maneuver and remove the old starter from its mounting location.
- Шинэ эхлүүлэгч суурилуулах:
- Position the new DB Electrical 410-44135 starter into place.
- Align the mounting holes and hand-tighten the mounting bolts.
- Once aligned, tighten the mounting bolts to the manufacturer's specified torque (refer to your vehicle's service manual).
- Утасыг дахин холбох:
- Reconnect the ignition switch wire to the appropriate solenoid terminal.
- Reconnect the main battery cable to the main solenoid terminal. Ensure all connections are clean and secure.
- Батерейг дахин холбох: Reconnect the positive (+) battery cable, then the negative (-) battery cable.
- Туршилтын ажиллагаа: Attempt to start the vehicle. Listen for proper starter engagement and engine cranking.
Зураг 3: Ар талд view of the starter, showing the electrical connection points for the battery cable and ignition wire.
Зураг 4: Урд view of the starter, displaying the drive gear (pinion) which engages with the engine's flywheel.
6. Үйл ажиллагаа
The starter motor is an integral part of your vehicle's starting system. When the ignition key is turned to the "START" position, electrical current flows to the starter solenoid. The solenoid then engages the starter drive gear with the engine's flywheel and simultaneously sends power to the starter motor. The motor rotates the flywheel, cranking the engine until it starts. Once the engine starts, the ignition key should be released, and the starter disengages from the flywheel.
Avoid prolonged cranking (more than 10-15 seconds) to prevent overheating the starter. Allow a brief cool-down period between starting attempts.
7. Засвар үйлчилгээ
The DB Electrical 410-44135 Starter is designed for minimal maintenance. However, periodic checks can help ensure its longevity and reliable operation:
- Холболтуудыг шалгах: Periodically check all electrical connections to the starter for corrosion or looseness. Clean any corrosion and tighten connections as needed.
- Батерейны нөхцөл: Ensure your vehicle's battery is in good condition and fully charged. A weak battery can put excessive strain on the starter.
- Кабелийн бүрэн бүтэн байдал: Inspect battery cables and starter cables for fraying, cracks, or damage. Replace damaged cables promptly.
8. Алдаа засах
If you experience issues with your starter, consider the following common problems and solutions:
| Шинж тэмдэг | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Starter clicks but engine does not crank. | Weak battery, loose battery cables, faulty solenoid, or seized engine. | Check battery charge and terminals. Inspect battery cables. If battery is good, test solenoid or starter motor. |
| Starter cranks slowly. | Low battery charge, corroded battery terminals, or high resistance in starter circuit. | Charge or replace battery. Clean battery terminals. Inspect starter cables for corrosion or damage. |
| Стартер эргэлдэж байгаа боловч хөдөлгүүр асахгүй байна. | Faulty starter drive (bendix) or damaged flywheel teeth. | Inspect starter drive gear and flywheel for damage. Replacement of starter may be necessary. |
| No response when turning ignition key. | Dead battery, faulty ignition switch, blown fuse, or open circuit in starter wiring. | Зайны хэмжээг шалгана ууtage. Inspect fuses related to starting system. Test ignition switch. Verify all wiring connections. |
If troubleshooting steps do not resolve the issue, it is recommended to consult a professional mechanic.
9. Техникийн үзүүлэлтүүд
| Онцлог | Тодорхойлолт |
|---|---|
| Нэгжийн төрөл | Эхлэгч |
| Ботьtage | 12 вольт |
| Эргүүлэх | Цагийн зүүний дагуу (CW) |
| Шүд | 9 |
| Эрчим хүч (КВт) | 1.2 кВт |
| Стартерын төрөл | Direct Drive (DD) |
| Зүйлийн жин | 7.65 фунт |
| Бүтээгдэхүүний хэмжээ (L x W x H) | 9.5 x 5.5 x 5.5 инч |
| Үйлдвэрлэгчийн хэсгийн дугаар | 410-44135 |
| UPC | 701485503160 |
10. Баталгаат хугацаа ба дэмжлэг
DB Electrical provides a 1 жилийн баталгаат хугацаа on this product from the date of purchase. This warranty covers defects in materials and workmanship under normal use. If the product fails within one year of your order, DB Electrical will replace it.
For warranty claims, technical assistance, or support, please contact DB Electrical customer service. Refer to your purchase documentation for contact details or visit the official DB Electrical webсайт.
Note: The warranty does not cover damage caused by improper installation, misuse, neglect, accident, or unauthorized modification.
