Танилцуулга
Thank you for choosing the ANSMANN Powerline 5 Pro Charger. This advanced microprocessor-controlled charger is designed for NiMH/NiCd rechargeable batteries, offering multiple charging programs and comprehensive safety features. Please read this manual carefully before using the device to ensure safe and optimal performance.
Аюулгүй ажиллагааны зааварчилгаа
- Use the charger only for NiMH/NiCd rechargeable batteries. Do not attempt to charge primary (non-rechargeable) batteries.
- Цэнэглэгчийг бороо, чийгэнд бүү тавь.
- Цэнэглэгчийг задлах эсвэл өөрчлөхийг хориглоно. Бүх засвар үйлчилгээг мэргэшсэн ажилтнуудад даатга.
- Цэнэглэх үед агааржуулалтыг сайтар хангана уу.
- Хүүхдийн гар хүрэхгүй газар хадгална.
- Зайны контактуудад богино холболт үүсгэхээс зайлсхий.
- Ашиглаагүй үед цэнэглэгчийг цахилгааны залгуураас салга.
Бүтээгдэхүүн дууссанview
The ANSMANN Powerline 5 Pro is a versatile battery charger featuring an LCD display and individual charging slots. It supports various battery sizes and offers multiple operational modes.
Зураг 1: Урд view of the ANSMANN Powerline 5 Pro Charger, showing the LCD display, control buttons (Current, Display, Mode), and four charging slots for cylindrical batteries, plus a dedicated slot for a 9V E-block battery.
Гол онцлогууд:
- Олон талын хэрэглээ: Charges 1-4 NiMH/NiCd batteries of sizes Micro AAA, Mignon AA, Baby C, Mono D, and one 9V E-block battery.
- Ухаалаг цэнэглэх технологи: Four charging programs (Charge, Discharge, Refresh, Test) individually adjustable per charging station.
- Өндөр аюулгүй байдал: Features reverse polarity protection, short circuit protection, overcharge protection, and automatic shut-off.
- Уншихад хялбар дэлгэц: Large illuminated LCD shows capacity, voltage, charging/discharging current, and charging time for each slot.
- Тохиромжтой хэрэглээ: Includes wide-range power supply for worldwide use and a 12V car adapter.
Багцын агуулга
Багцыг нээхдээ бүх бүрэлдэхүүн хэсгүүд байгаа бөгөөд гэмтэлгүй эсэхийг шалгана уу.
- ANSMANN Powerline 5 Pro Charger Unit
- AC Power Adapter (Wide-range)
- 12V машины адаптер
- Хэрэглэгчийн гарын авлага (энэ баримт бичиг)
Figure 2: The Powerline 5 Pro charger shown with its included accessories: the AC power adapter and the 12V car adapter.
Тохиргоо
Цахилгаан хангамжийг холбох:
- Locate the DC 12V 1.5A input port on the rear of the charger.
- Connect the provided AC power adapter or 12V car adapter to this input port.
- Plug the other end of the AC power adapter into a suitable wall outlet, or the car adapter into your vehicle's 12V socket.
- The charger's LCD display will illuminate, indicating it is powered on and ready for use.
Зураг 3: Ар талд view of the Powerline 5 Pro charger highlighting the 12V 1.5A DC input port for connecting the power adapter.
Ашиглалтын заавар
Батерейг оруулах:
The charger supports various battery sizes. Ensure correct polarity when inserting batteries into the charging slots. The 9V E-block battery has a dedicated slot.
Figure 4: Illustration showing the various battery types suitable for the Powerline 5 Pro charger, including Micro AAA, Mignon AA, Baby C, Mono D, and 9V E-Block.
Understanding the Display and Controls:
The LCD display provides real-time information for each charging slot. The three buttons (Current, Display, Mode) allow you to control the charging process.
- Current Button: Adjusts the charging/discharging current.
- Дэлгэцийн товчлуур: Toggles through different display parameters (e.g., voltage, capacity, time).
- Горимын товчлуур: Selects the desired operating program (Charge, Discharge, Refresh, Test).
Figure 5: The Powerline 5 Pro charger with batteries inserted, demonstrating the individual monitoring and automatic shutdown features. The LCD shows charging status.
Charging Programs:
Each charging slot can operate independently with its own program.
- Цэнэглэх: Standard charging mode. Insert battery, select desired current with "Current" button, then press "Mode" to start. The charger automatically detects full charge and switches to trickle charge.
- Цутгах: Discharges the battery before recharging it. Useful for reducing memory effect in NiCd batteries. Select "Discharge" mode with "Mode" button, then set discharge current with "Current" button. After discharge, the charger will automatically begin charging.
- Сэргээх: Repeatedly discharges and charges the battery to optimize its capacity and rejuvenate older batteries. This process can take several hours or even days depending on battery condition. Select "Refresh" mode with "Mode" button.
- Туршилт: Charges the battery fully, then discharges it to measure its actual capacity, and finally recharges it. This provides an accurate reading of the battery's health. Select "Test" mode with "Mode" button.
To select a program for a specific slot, first select the slot by pressing the "Display" button until the desired slot is highlighted, then use the "Mode" button to cycle through programs. Use the "Current" button to adjust current settings if applicable.
Засвар үйлчилгээ
- Clean the charger regularly with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ensure the charging contacts are free of dust and debris for optimal connection.
- Цэнэглэгчийг ашиглаагүй үед сэрүүн, хуурай газар хадгална.
- Цэнэглэгчийг унагах эсвэл хүчтэй цохилтонд оруулахаас зайлсхий.
Алдааг олж засварлах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Цэнэглэгч асахгүй байна. | Цахилгаан хангамж байхгүй; адаптер эвдэрсэн; холболт сул байна. | Check power outlet; ensure adapter is securely connected to charger and wall/car socket; try a different outlet. |
| Battery not charging (display shows "ERR"). | Incorrect battery type (non-rechargeable); faulty battery; incorrect polarity; poor contact. | Ensure battery is NiMH/NiCd; try a different battery; reinsert battery with correct polarity; clean battery and charger contacts. |
| Charging process takes too long. | High capacity battery; low charging current selected; battery in "Refresh" or "Test" mode. | This is normal for high capacity batteries; increase charging current if possible; "Refresh" and "Test" modes are designed to take longer. |
| Дэлгэц бүдэгхэн эсвэл анивчих. | Тогтворгүй цахилгаан хангамж. | Ensure stable power source; try a different outlet or adapter. |
Үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Загварын дугаар | 1001-0018 |
| Тохиромжтой батерейны төрлүүд | NiMH / NiCd (Micro AAA, Mignon AA, Baby C, Mono D, 9V E-block) |
| Оролтын хэмжээtage | 12V DC, 1.5A (via included AC adapter or car adapter) |
| Charging Programs | Charge, Discharge, Refresh, Test |
| Дэлгэц | Арын гэрэлтэй LCD |
| Аюулгүй байдлын онцлогууд | Reverse polarity protection, short circuit protection, overcharge protection, automatic shut-off |
| Бүтээгдэхүүний хэмжээс | 5.59 x 6.67 x 1.56 инч (14.2 x 17.0 x 3.96 см) |
| Зүйлийн жин | 1.21 фунт (0.55 кг) |
| Үйлдвэрлэгч | ANSMANN |
Figure 6: Dimensions of the Powerline 5 Pro charger, indicating a width of 17.0 cm and a height of 14.2 cm.
Баталгаат болон дэмжлэг
ANSMANN products are manufactured with high quality standards. For warranty information and technical support, please refer to the official ANSMANN webсайт эсвэл харилцагчийн үйлчилгээтэй шууд холбогдоно уу. Худалдан авалтын баримтаа худалдан авалтын баталгаа болгон хадгалаарай.
Нэмэлт тусламж авахыг хүсвэл зочилж болно Ansmann Store on Amazon.
