1. Танилцуулга
Thank you for choosing the Deca Parva 145E Welding Machine. This manual provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your new welding equipment. Please read this manual thoroughly before using the machine and keep it for future reference.
The Deca Parva 145E is designed for various welding tasks, offering reliable performance for both hobbyists and professionals. Proper understanding and adherence to these instructions will ensure optimal results and prolong the life of your machine.
2. Аюулгүй ажиллагааны заавар
АНХААРУУЛГА: Гагнуур нь аюултай байж болно. Ноцтой гэмтэл, үхлээс урьдчилан сэргийлэхийн тулд аюулгүй байдлын урьдчилан сэргийлэх арга хэмжээг үргэлж дагаж мөрдөөрэй.
- Цахилгаан цохих: Welding current can cause fatal electric shock. Ensure proper grounding. Do not touch live electrical parts. Wear dry, insulated gloves.
- Утаа ба хий: Welding fumes and gases can be hazardous to your health. Work in a well-ventilated area. Use a fume extractor if necessary.
- Нуман туяа: Arc rays can burn eyes and skin. Wear a welding helmet with appropriate shade filter and protective clothing.
- Гал ба дэлбэрэлт: Welding sparks and hot metal can cause fire or explosions. Keep flammable materials away from the welding area. Have a fire extinguisher readily available.
- Түлэнхий: Hot metal and slag can cause severe burns. Wear protective gloves and clothing.
- Pace Makers: Persons with pacemakers should consult their doctor before operating this equipment.
- Ямар нэгэн засвар үйлчилгээ хийхээсээ өмнө үргэлж цахилгааныг салга.
3. Багцын агуулга
Carefully unpack the box and ensure all items are present and undamaged. If any items are missing or damaged, contact your retailer immediately.
- Deca Parva 145E Welding Machine
- Кабельтай электрод эзэмшигч
- Газрын Clamp Кабелийн хамт
- Welding Mask (Handheld)
- Chipping Hammer / Wire Brush
- Зааварчилгааны гарын авлага
4. Бүтээгдэхүүн дууссанview
The Deca Parva 145E is a compact and robust welding machine designed for various arc welding applications. Below is an image illustrating the main unit and its included accessories.
Зураг 1: Deca Parva 145E Welding Machine and included accessories. The image displays the yellow main welding unit, a black handheld welding mask, a black chipping hammer with a wire brush, an electrode holder, and a ground clamp.
Гол бүрэлдэхүүн хэсгүүд:
- Үндсэн нэгж: Шар casing with control panel.
- Эрчим хүч солих: Асаах/унтраах удирдлага.
- Одоогийн тохируулгын товчлуур: For stepless welding current regulation.
- Thermal Protection Indicator: Illuminates when the machine overheats.
- Гаралтын терминалууд: Connections for electrode holder and ground clamp.
- Электрод эзэмшигч: Secures the welding electrode.
- Газрын Clamp: Цахилгаан хэлхээг бүрэн гүйцэд болгохын тулд ажлын хэсэгт холбогддог.
- Welding Mask: Provides eye and face protection from arc rays and sparks.
- Chipping Hammer/Wire Brush: Used for removing slag and cleaning welds.
5. Тохиргоо
- Байршил: Place the welding machine on a stable, level surface in a well-ventilated area, away from flammable materials. Ensure adequate space around the machine for air circulation.
- Эрчим хүчний холболт: Connect the machine's power cord to a suitable grounded electrical outlet. Ensure the power supply matches the machine's requirements (refer to specifications).
- Ground Cl-г холбоно ууamp: Газрыг хавсарганаamp cable to the appropriate output terminal on the welding machine. Securely attach the ground clamp ажлын хэсэг эсвэл гагнуурын ширээнд холбож, цахилгаан холбоо барих сайн байдлыг хангана.
- Электрод эзэмшигчийг холбох: Attach the electrode holder cable to the other output terminal on the welding machine. Insert a suitable electrode into the electrode holder. The recommended electrode size for this machine is 1.6mm to 3.2mm.
- Хувийн хамгаалах хэрэгсэл (PPE): Before turning on the machine, ensure you are wearing all necessary PPE, including a welding helmet, welding gloves, and protective clothing.
6. Ашиглалтын заавар
- Асаах: Switch the main power switch to the "ON" position.
- Гагнуурын гүйдлийг тохируулах: Adjust the current adjustment knob to the desired welding current. The appropriate current setting depends on the electrode diameter and the material thickness being welded. Start with a lower setting and increase as needed.
- Ажлын хэсгийг бэлтгэх: Ensure the workpiece is clean and free of rust, paint, or grease to ensure a good weld.
- Нуман цохих: While wearing your welding helmet, gently tap or scratch the electrode against the workpiece to strike an arc. Once the arc is established, maintain a consistent arc length and travel speed.
- Гагнуур: Move the electrode along the joint, maintaining a steady hand and angle. Observe the weld pool and adjust your technique as necessary.
- Дулааны хамгаалалт: If the thermal protection indicator illuminates, the machine has overheated. Turn off the machine and allow it to cool down before resuming operation. Do not bypass this safety feature.
- Finish Welding: When finished, lift the electrode from the workpiece to break the arc. Turn off the welding machine.
- Гагнуурын дараах цэвэрлэгээ: Use the chipping hammer to remove slag from the weld bead, then use the wire brush to clean the weld.
7. Засвар үйлчилгээ
Тогтмол засвар үйлчилгээ нь таны гагнуурын машины урт наслалт, аюулгүй ажиллагааг хангана.
- Цэвэрлэгээ: Periodically clean the machine's exterior with a dry cloth. Use compressed air to blow out dust and debris from the ventilation openings. Ensure the machine is unplugged before cleaning.
- Кабелийн үзлэг: Regularly inspect all cables (power, electrode, ground) for cuts, fraying, or damage. Replace damaged cables immediately.
- Терминал холболтууд: Ensure all terminal connections are tight and free of corrosion.
- Хадгалах: Store the welding machine in a dry, clean environment, away from moisture and extreme temperatures.
- Электрод эзэмшигч ба газардуулгын холбогчamp: Keep these accessories clean and in good working condition. Replace if damaged.
8. Алдаа засах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Машинд хүч байхгүй. | Цахилгааны утас салгагдсан, залгуур эвдэрсэн, хэлхээний таслуур тасарсан. | Check power connection, test outlet, reset circuit breaker. |
| Machine turns on but no arc. | Poor ground connection, incorrect current setting, faulty electrode holder/cable, wet electrode. | Газардуулга clamp is securely attached to clean metal. Adjust current. Inspect cables and holder. Use dry electrodes. |
| Thermal protection light is on. | Machine overheated due to prolonged use or insufficient ventilation. | Turn off the machine and allow it to cool down. Ensure proper ventilation. Reduce duty cycle. |
| Poor weld quality (e.g., porosity, lack of penetration). | Incorrect current, improper arc length, wrong electrode, dirty workpiece, incorrect travel speed. | Adjust current, maintain proper arc length, use correct electrode for material, clean workpiece, adjust travel speed. |
If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact customer support.
9. Техникийн үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Брэнд | Арван жил |
| Загварын нэр | Parva 145E |
| Хэсгийн дугаар | 0400193 |
| Загварын дугаар | 322006 |
| Гагнуурын гүйдэл | Алхамгүй тохируулга |
| Electrode Diameter Range | 1.6 мм - 3.2 мм |
| Эрчим хүчний эх үүсвэрийн төрөл | Цахилгаан (AC) |
| Бүтээгдэхүүний хэмжээс | 390 x 210 x 280 mm (from description) / 24.99 x 16.99 x 29.49 cm (from specifications) |
| Зүйлийн жин | 14.5 kg (from description) / 14.3 kg (from specifications) |
| Үйлдвэрлэгч | DECA |
| Эхний боломжтой огноо | 17 оны есдүгээр сарын 2015 |
Жич: Бүтээгдэхүүнийг сайжруулахын тулд техникийн үзүүлэлтүүдийг мэдэгдэлгүйгээр өөрчилж болно.
10. Баталгаат хугацаа ба дэмжлэг
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Deca products are manufactured to high-quality standards, and support is available for any operational issues or technical inquiries.
If you require technical assistance or have questions regarding your Deca Parva 145E Welding Machine, please contact the authorized Deca service center or your point of purchase. When contacting support, please have your model number (0400193 / 322006) and purchase date available.
