1. Танилцуулга
This manual provides essential information for the safe and effective installation, operation, and maintenance of your Viqua 650652 H PLUS Commercial UV System. This system is designed for commercial applications requiring high flow water disinfection, such as restaurants, large office buildings, hotels, and schools. It utilizes ultraviolet (UV) light to disinfect water without the use of chemicals, ensuring safe water for various uses.
2. Аюулгүй байдлын мэдээлэл
Read all instructions carefully before installation and operation. Failure to follow these instructions may result in injury or damage to the system. Keep this manual for future reference.
- Цахилгааны аюул: Always disconnect power before servicing the unit. Ensure proper grounding.
- Хэт ягаан туяаны цацраг: Хэт ягаан туяаны гэрэл рүү шууд харж болохгүйamp. UV light can cause severe eye and skin irritation.
- Усны даралт: Ensure the system is installed in a location with appropriate water pressure.
- Ус гоожих: Inspect all connections for leaks after installation and during maintenance.
- Мэргэжлийн суурилуулалт: Installation should be performed by a qualified professional to ensure compliance with local codes and proper system function.
3. Бүтээгдэхүүн дууссанview
The Viqua 650652 H PLUS system is a robust commercial UV water disinfection unit designed for high-flow applications up to 45 GPM. It features an amalgam UV lamp for extended life and enhanced performance, along with an integrated sensor for monitoring UV light intensity.
Гол онцлогууд:
- Amalgam UV lamp with up to 2 years of operational life.
- Integrated sensor for continuous UV light monitoring, ensuring proper UV exposure.
- Digital display for UV lamp амьдралын тоолол.
- Compatibility with 100-240V, 50-60Hz electrical systems.
- Optional integration with a solenoid valve for automatic water shut-off in case of system errors.
Системийн бүрэлдэхүүн хэсгүүд:
The system typically consists of a stainless steel UV chamber, a UV lamp, a quartz sleeve, a UV sensor, and a controller unit.

Image 3.1: The Viqua 650652 H PLUS Commercial UV System, showing the main unit with its controller and chamber.
4. Тохиргоо ба суурилуулалт
Proper installation is critical for the effective operation of your UV system. It is highly recommended that installation be performed by a certified plumber or qualified professional.
4.1 Суурилуулалтын өмнөх шалгалт:
- Бүх бүрэлдэхүүн хэсгүүд байгаа бөгөөд гэмтэлгүй байгаа эсэхийг шалгаарай.
- Verify water quality parameters (e.g., hardness, iron, manganese) meet system requirements. Pre-filtration may be necessary.
- Select a suitable mounting location that is protected from the elements, allows for easy access for maintenance, and is close to a power outlet.
4.2 Суулгах алхамууд:
- Суурилуулалт: Securely mount the UV chamber horizontally or vertically using the provided mounting brackets.
- Сантехникийн холболтууд: Connect the water inlet and outlet to the UV chamber. Ensure all connections are watertight.
- Quartz Sleeve Installation: Carefully insert the quartz sleeve into the UV chamber, ensuring it is centered and sealed with O-rings.
- Хэт ягаан туяаны Л.amp Суурилуулалт: UV l-г оруулнаamp кварц ханцуйнд холбоно уу.amp connector to the controller.
- Мэдрэгч суурилуулах: Install the UV sensor into its designated port on the chamber. Connect the sensor cable to the controller.
- Цахилгааны холболт: Connect the controller to a grounded electrical outlet (100-240V, 50-60Hz).
- Нэвчилт шалгах: Усны хангамжийг аажмаар асааж, гоожиж байгаа эсэхийг шалгана уу.
5. Ашиглалтын заавар
Once installed, the Viqua H PLUS system operates automatically to disinfect your water supply.
5.1 Initial Startup:
- After completing installation and leak checks, plug in the controller.
- The system will perform a self-diagnostic test. The display will show the remaining lamp амьдралын тоолол.
- Allow water to flow through the system for several minutes to purge any air.
5.2 Хэвийн ажиллагаа:
- The controller display will continuously show the number of days remaining until the UV lamp солих шаардлагатай.
- The integrated UV sensor monitors the UV intensity. If the intensity drops below a safe level, an alarm will sound, and an error message will be displayed.
- If an optional solenoid valve is connected, it will automatically shut off the water flow upon detection of a system error (e.g., low UV intensity, lamp failure) to prevent untreated water from passing through.
6. Засвар үйлчилгээ
Regular maintenance ensures the continued effectiveness and longevity of your Viqua UV system. Always disconnect power before performing any maintenance.
6.1 Хэт ягаан туяаны Lamp Солих:
- The amalgam UV lamp has a life expectancy of up to 2 years (approximately 17,520 hours).
- l-г солихamp when the controller indicates the end of its operational life or when an alarm signals low UV intensity.
- Тодорхой л-г үзнэ үүamp солих зааварчилгаа lamp or on the Viqua webсайт.
6.2 Quartz Sleeve Cleaning and Replacement:
- The quartz sleeve should be cleaned annually or more frequently if water quality dictates (e.g., high hardness leading to scaling).
- Use a soft cloth and a mild acid (e.g., citric acid or vinegar) to remove any mineral deposits.
- Replace the quartz sleeve if it is cracked, scratched, or cannot be cleaned effectively.
6.3 Sensor Maintenance:
- Periodically inspect the UV sensor for any buildup or damage. Clean as necessary following manufacturer guidelines.
7. Алдаа засах
This section provides solutions to common issues. For problems not listed here or if issues persist, contact Viqua customer support or a qualified service technician.
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| No UV light/Lamp гэрэлтүүлэхгүй |
|
|
| Low UV intensity alarm |
|
|
| Water shut-off (with optional solenoid) |
|
|
| Ус гоожиж байна |
|
|
8. Техникийн үзүүлэлтүүд
| Загварын дугаар | 650652 |
| Системийн төрөл | Commercial UV Water Disinfection System |
| Урсгалын хурд | Up to 45 GPM (Gallons Per Minute) |
| Хэт ягаан туяаны Л.amp Төрөл | Amalgam Lamp |
| Lamp Амьдрал | Up to 2 years (17,520 hours) |
| Цахилгааны шаардлага | 100-240V, 50-60Hz гэх мэт |
| Зүйлийн жин | 28 фунт |
9. Баталгаат хугацаа ба дэмжлэг
For warranty information, technical support, or to purchase replacement parts, please contact Viqua customer service. Ensure you have your model number (650652) and date of purchase available when contacting support.
Viqua Contact Information: Refer to the official Viqua webхамгийн сүүлийн үеийн холбоо барих мэдээллийг авахын тулд сайт эсвэл таны худалдан авалтын баримт бичиг.





