Brandmotion FLTW-7690

Brandmotion FLTW-7690 Universal 4.3 инчийн арын дэлгэц View Толин тусгал ашиглах гарын авлага

Model: FLTW-7690

1. Танилцуулга

The Brandmotion FLTW-7690 Universal 4.3-inch Display Rear View Mirror is designed to enhance driving safety by providing a clear view of the area behind your vehicle when connected to an aftermarket backup camera. This mirror replaces your traditional rear view mirror and features an embedded 4.3-inch LCD color screen that automatically activates when the vehicle is in reverse. When not in reverse, the screen disappears, allowing the mirror to function as a standard rear view mirror. This manual provides essential information for proper installation, operation, and maintenance of your new display mirror.

2. Аюулгүй байдлын мэдээлэл

3. Багцын агуулга

Суулгаж эхлэхээс өмнө бүх эд зүйлс байгаа эсэхийг шалгана уу:

Brandmotion FLTW-7690 mirror and wiring harness components

Image: The Brandmotion FLTW-7690 display mirror shown with its included wiring harness and mounting accessories.

4. Бүтээгдэхүүн дууссанview

The Brandmotion FLTW-7690 mirror integrates a 4.3-inch LCD screen into a standard rear view mirror housing. Key features include:

Урд view of Brandmotion FLTW-7690 mirror with backup camera display active

Зураг: Урд view of the Brandmotion FLTW-7690 mirror showing the 4.3-inch embedded display with a backup camera feed. Note the power button below the mirror surface.

Арын view of Brandmotion FLTW-7690 mirror showing mounting arm and wiring

Зураг: Ар талд view of the Brandmotion FLTW-7690 mirror, illustrating the mounting arm and the wiring exiting the unit.

5. Суурилуулалт

Тооцоолсон суурилуулах хугацаа: DIY: 60-90 minutes; Professional: 30-60 minutes.

5.1 Суурилуулалтын өмнөх шалгалт

5.2 Толин тусгалыг суурилуулах

  1. Carefully remove your vehicle's existing rear view mirror from its D-Tab Wedge mount.
  2. Slide the Brandmotion FLTW-7690 mirror onto the existing D-Tab Wedge mount until it is securely seated.
  3. Tighten any set screws or locking mechanisms on the mirror mount to ensure stability.

5.3 утас холболт

  1. Эрчим хүчний холболт: Connect the mirror's power wire (typically red) to a switched 12V power source in your vehicle. Connect the ground wire (typically black) to a suitable chassis ground point. Ensure the operating voltage 9-24В дотор байна.
  2. Backup Camera Video Input: Connect the RCA video output cable from your aftermarket backup camera to one of the RCA input jacks on the mirror's wiring harness. The mirror has two RCA inputs.
  3. Урвуу триггер утас: Connect the mirror's reverse trigger wire (often purple or green) to your vehicle's reverse light circuit. This wire signals the mirror to activate the display when the vehicle is in reverse.
  4. Маршрутын утас: Carefully route all wiring behind trim panels and headliner to conceal it and prevent interference with vehicle operation. Secure wiring with zip ties or electrical tape as needed.
Diagram showing wiring connections for the Brandmotion display mirror

Image: A diagram illustrating the typical wiring connections for the Brandmotion display mirror, including power, ground, video input, and reverse trigger.

5.4 Суулгасны дараах шалгалт

  1. Тээврийн хэрэгслийн батарейг дахин холбоно уу.
  2. Start the vehicle and shift into reverse. The 4.3-inch display should activate and show the backup camera feed.
  3. Shift out of reverse. The display should turn off and disappear.
  4. Test the On/Off button for manual display control.

6. Ашиглалтын заавар

Brandmotion FLTW-7690 mirror installed in a vehicle, showing active backup camera view

Image: The Brandmotion FLTW-7690 mirror as seen from the driver's perspective, with the backup camera display active and showing parking assist lines (if provided by the camera).

7. Засвар үйлчилгээ

8. Алдаа засах

АсуудалБоломжит шалтгаанШийдэл
Display does not turn on in reverse.No power to the mirror; reverse trigger wire not connected or faulty; faulty backup camera; loose video connection.Check power and ground connections. Verify reverse trigger wire is correctly connected to the reverse light circuit. Ensure backup camera is powered and functioning. Check RCA video cable connection.
Display shows "No Signal" or a black screen.Backup camera not powered; loose video connection; incorrect video input selected (if applicable).Verify backup camera power. Check RCA video cable connection at both the camera and the mirror. Ensure the correct video input is active.
Зураг гажуудсан эсвэл анивчсан байна.Poor video connection; electrical interference; faulty camera or mirror.Check all video connections for tightness. Ensure wiring is routed away from high-voltage cables. Test with a different video source if possible.
Mirror does not fit vehicle mount.Incorrect mount type for vehicle.An adapter (e.g., Brandmotion 5000-TFAB) may be required. Consult a professional installer or Brandmotion support.

9. Техникийн үзүүлэлтүүд

10. Баталгаат хугацаа ба дэмжлэг

For warranty information, please refer to the documentation included with your purchase or visit the official Brandmotion website. For technical support or assistance with installation, please contact Brandmotion customer service directly.

Brandmotion Contact Information:

Холбогдох баримт бичиг - FLTW-7690

Урьдчилсанview Brandmotion FVMR-2000 Дижитал 2 оролтын толин тусгал суурилуулах гарын авлага
Brandmotion FVMR-2000 Дижитал 2 оролтын толийг суурилуулах цогц заавар. 1080p AHD камертай нийцтэй шинэ толин системээ хэрхэн холбох, цахилгаанаар хангах, холбох, турших талаар суралцаарай.
Урьдчилсанview Brandmotion FVMR-2000 Дижитал 2 оролтын толин тусгал суурилуулах гарын авлага
Brandmotion FVMR-2000 Дижитал 2 Оролтын Толин тусгалыг суурилуулах алхам алхмаар зааварчилгаа, хэрэгслийн агуулга, санал болгож буй багаж хэрэгсэл, утас холболт, туршилтыг багтаасан болно.
Урьдчилсанview Brandmotion FLTW-7692V3 7.3" Display Mirror Installation and User Manual
Comprehensive installation guide and user manual for the Brandmotion FLTW-7692V3 7.3-inch display mirror with 3 video inputs and D-tab mount. Learn how to install, wire, and operate the mirror.
Урьдчилсанview Brandmotion FLTW-3050 Commercial Backup Sensor Installation Guide
Detailed installation instructions and troubleshooting guide for the Brandmotion FLTW-3050 Commercial Backup Sensor system. Includes kit contents, sensor and ECU mounting, and testing procedures.
Урьдчилсанview Brandmotion 9002-9613 Slimline гарын авлагын бүдэгрүүлэгч толь суурилуулах гарын авлага
3.5 инчийн дэлгэцтэй Brandmotion 9002-9613 Slimline гарын авлагын бүдэгрүүлэгч OEM толь суурилуулах заавар, толин тусгалыг авах, суурилуулах, камерын шаардлага, утас холболт, ашиглалтыг харуулсан.
Урьдчилсанview Brandmotion програмын гарын авлага: Арын хараа болон тольны системд зориулсан тээврийн хэрэгслийн нийцтэй байдал
Brandmotion Хэрэглээний гарын авлага нь автомашины арын харааны систем, автоматаар бүдгэрдэг толь болон холбогдох хэрэгслүүдийн нийцтэй байдлын чухал мэдээллийг өгдөг. Энэхүү гарын авлага нь хэрэглэгчдэд тодорхой тээврийн хэрэгслийн марк, загвар, жилдээ тохирох Brandmotion бүтээгдэхүүнийг олоход тусалж, тээврийн хэрэгслийн бүрэн бүтэн байдал, аюулгүй байдал, тав тухыг сайжруулдаг.