Konstsmide 2888-000 LED Snow Globe Lantern Santa Scene Instruction Manual

1. Танилцуулга

This instruction manual provides essential information for the safe and efficient use of your Konstsmide 2888-000 LED Snow Globe Lantern. Please read these instructions carefully before initial use and retain them for future reference. This product is designed for indoor use only.

2. Бүтээгдэхүүн дууссанview

The Konstsmide 2888-000 is an LED-illuminated snow globe lantern featuring a Santa scene. It is water-filled with an integrated water spinner that circulates glitter, creating a continuous snow effect. The lantern operates on batteries and includes a 5-hour timer function.

Зураг 2.1: Урд view of the Konstsmide 2888-000 LED Snow Globe Lantern, showcasing the Santa scene and glitter effect.

3. Аюулгүй байдлын мэдээлэл

• Зөвхөн дотор ашиглах: This product is rated IP20 and is intended for indoor use in dry environments. Do not expose to water or high humidity.
• Батерейны аюулгүй байдал:
  • Use only the specified battery type (3 x C 1.5V batteries).
  • Хуучин болон шинэ батерей, өөр төрлийн батерейг бүү холь.
  • Батерейг зөв туйлтай (+/-) оруулаарай.
  • Цэврүүтэхээс сэргийлж дууссан батерейг нэн даруй зайлуул.
  • If the product will not be used for an extended period, remove the batteries.
  • Батерейг хүүхдэд хүрэхгүй газар хадгал.
• Харьцуулах: Handle the lantern with care. Avoid dropping or strong impacts, which could damage the internal components or cause the liquid to leak.
• Засвар: Do not attempt to open or repair the product yourself. Refer all servicing to qualified personnel.
• Устгах: Dispose of batteries and the product according to local regulations.

4. Тохиргоо

4.1 Савлах

1. Carefully remove the lantern from its packaging.
2. Inspect the product for any signs of damage. If damaged, do not use and contact your retailer.
3. Retain packaging for storage or transport if needed.

4.2 Батерей суурилуулах

The lantern requires 3 x C 1.5V batteries (not included).

1. Locate the battery compartment cover, typically on the bottom of the lantern.
2. Open the battery compartment cover. This may require a small screwdriver.
3. Insert 3 C 1.5V batteries, ensuring correct polarity as indicated inside the compartment.
4. Зайны тасалгааны тагийг найдвартай хаа.

Figure 4.2: The Konstsmide LED Snow Globe Lantern placed on a surface, illustrating its appearance in an indoor environment. The battery compartment is located at the base.

4.3 Байршил

Place the lantern on a stable, flat surface indoors, away from direct sunlight, heat sources, and areas where it might be easily knocked over. Ensure it is not placed near sensitive electronics or materials that could be damaged by potential water leakage, although this is rare.

5. Ашиглалтын заавар

5.1 Power On/Off and Timer Function

The lantern typically features a switch with multiple positions, often located near the battery compartment:

• Унтрааж байна: Turns the lantern completely off.
• АСААЛТ: Activates the LED light and water spinner continuously. The lantern will remain on until manually switched off or batteries are depleted.
• TIMER (5H): Activates the LED light and water spinner for 5 hours. After 5 hours, the lantern will automatically turn off. It will then automatically turn on again at the same time the next day for another 5 hours. This cycle repeats daily until the batteries are removed or depleted, or the switch is moved to another position.

To set the timer, switch the lantern to the "TIMER" position at your desired start time. For example, if you want it to turn on at 6 PM daily, switch it to "TIMER" at 6 PM.

5.2 Water Spinner and Glitter Effect

Upon activation (ON or TIMER mode), the internal motor will begin to spin the water, causing the glitter particles to circulate and create a dynamic snow-like effect around the Santa scene. This effect is continuous while the unit is powered on.

6. Засвар үйлчилгээ

6.1 Цэвэрлэгээ

• Ensure the lantern is switched off before cleaning.
• Гаднах гадаргууг зөөлөн, хуурай эсвэл бага зэрэг чийгтэй алчуураар арчина.amp даавуу.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or the plastic globe.
• Avoid getting water into the battery compartment or any electrical components.

6.2 Батерейг солих

When the light dims, the glitter spinner slows down, or the unit stops functioning, it is time to replace the batteries. Follow the steps in Section 4.2 for battery installation, ensuring all three C 1.5V batteries are replaced with new ones.

6.3 Хадгалалт

If storing the lantern for an extended period, remove the batteries to prevent leakage and potential damage. Store in a cool, dry place, preferably in its original packaging, to protect it from dust and physical damage.

7. Алдаа засах

8. Техникийн үзүүлэлтүүд

• Загвар: 2888-000
• Брэнд: Констсмид
• Бүтээгдэхүүний хэмжээ: 4.13"L x 4.13"W x 10.63"H (10.5 см L x 10.5 см W x 27 см H)
• Материал: Хуванцар, металл
• Өнгө: Brown (lantern casing)
• Гэрлийн эх үүсвэр: 1 Warm White LED Diode
• Эрчим хүчний эх үүсвэр: 3 x C 1.5V Batteries (not included)
• Operating Time (approx.): 190 hours (on new batteries)
• Таймер функц: 5 hours ON / 19 hours OFF (automatic daily cycle)
• Оролтын хамгаалалт (IP) үнэлгээ: IP20 (Зөвхөн дотор ашиглах)
• Барааны жин: Ойролцоогоор 1.4 кг (3.08 фунт)

9. Баталгаат хугацаа ба дэмжлэг

For warranty information or technical support, please refer to the documentation provided at the point of purchase or contact Konstsmide customer service directly. Contact details can typically be found on the manufacturer's official webсайт эсвэл бүтээгдэхүүний сав баглаа боодол.

You can visit the official Konstsmide webдэлгэрэнгүй мэдээллийг сайтаас авна уу: www.konstsmide.com