Anlapus 2.0MP 1080P HD 4-in-1 Security Camera Instruction Manual

1. Бүтээгдэхүүн дууссанview

The Anlapus 2.0MP 1080P HD 4-in-1 Security Camera is designed for both outdoor and indoor surveillance. It supports multiple video formats including TVI, CVI, AHD, and CVBS/960H analog, ensuring compatibility with various DVR systems. This camera features 24 IR LEDs for night vision and a weatherproof housing for reliable performance in diverse environmental conditions.

Image 1.1: Anlapus 2.0MP 1080P HD 4-in-1 Security Camera, showing its bullet-style design and mounting base.

2. Үндсэн шинж чанарууд

• 4-in-1 нийцтэй байдал: Supports TVI, CVI, AHD, and CVBS/960H analog video formats.
• 1080P HD нягтрал: 2.0MP (1920x1080) sensor for clear and bright images.
• 80 футын шөнийн хараа: Equipped with 24 IR LEDs and Dual IR-Cut Filter for clear night surveillance.
• IP66 цаг агаарт тэсвэртэй: Durable housing protects against rain, snow, and harsh weather.
• 3.6мм линз: Provides a wide viewөнцөг.
• 3-Axis Camera Stand: Allows for flexible mounting and positioning.
• Digital Wide Dynamic Range (DWDR): Enhances image quality in varying light conditions.
• Хэрэглэгчдэд ээлтэй OSD цэс: On-Screen Display menu for easy configuration and mode switching.

3. Багцын агуулга

• 1 x Anlapus 1080p 4-in-1 Security Camera
• 1 x Зааварчилгааны гарын авлага
• 1 х шураг суурилуулах

Жич: Power supply and video extension cable are not included and must be purchased separately.

Image 3.1: Contents of the Anlapus security camera package, including the camera, instruction manual, and mounting screws.

4. Тохиргоо ба суурилуулалт

1. Суурилуулалт:

   Хүссэн зүйлээ харгалзан камерт тохиромжтой байршлыг сонгоно уу viewing area and proximity to power and video cables. Use the included mounting screws to securely attach the camera to a wall or ceiling. The 3-axis stand allows for flexible adjustment of the camera's angle.

2. Кабелийн холболт:

   Connect the camera's video output (BNC connector) to your DVR system using a compatible video extension cable (not included). Connect the camera's power input to a 12V power supply (not included).

3. Асаах:

   Once all connections are secure, plug in the power supply to activate the camera and DVR system.

Image 4.1: Diagram showing the Anlapus camera with its components labeled, including the IP66 weatherproof rating, 3.6mm lens, IR-Cut filter, 24 LEDs for night vision, glass cover, OSD joystick, power port, and video output.

5. Operating Instructions: Video Mode Switching

This Anlapus camera supports four video modes: TVI, CVI, AHD, and CVBS/960H Analog. The default video mode is TVI. To ensure proper display, the camera's output mode must match the input mode supported by your DVR. You can switch the video mode using the OSD (On-Screen Display) joystick located on the camera's short cable.

5.1. How to Switch Video Output Mode

1. Check DVR Compatibility:

   Before switching, identify which video formats your DVR supports. This is crucial for successful operation.

2. Connect Camera to DVR:

   Ensure the 4-in-1 camera is connected to your DVR system and powered on.

3. Use OSD Joystick:

   Press and hold the OSD joystick in the desired direction for approximately 5 seconds, then release. The screen will momentarily go blank before displaying the image in the new mode.

   • Дээшээ: Switches to CVBS/960H Analog mode.
   • Доош: Switches to CVI mode.
   • Leftward: Switches to AHD mode.
   • Rightward: Switches to TVI mode (default).

Чухал тэмдэглэл: If your DVR supports 4-in-1 (or 5-in-1) modes, it is recommended to set the camera to TVI, AHD, or CVI mode for optimal image quality. If no image displays after switching, try cycling through all modes on the OSD joystick.

Image 5.1: Diagram illustrating the OSD joystick and the directions to press for switching between ANALOG (CVBS/960H), AHD, TVI, and CVI video modes.

Image 5.2: Visual representation of the 4-in-1 camera's compatibility with 960H, CVI, AHD, and TVI video outputs, showing exampле фүүtage for each mode.

Image 5.3: Step-by-step guide on how to switch the camera's output mode: 1. Verify DVR support, 2. Connect camera to DVR, 3. Use OSD joystick to switch modes (Up for CVBS 960H, Down for CVI, Left for AHD, Right for TVI).

5.2. Video Demonstration: How to Use Anlapus 4-in-1 Camera

Video 5.1: A demonstration video showing the process of switching the Anlapus 4-in-1 camera between different video modes (CVBS/960H, CVI, AHD, TVI) using the OSD joystick, and how the image appears on a connected monitor.

6. Алдаа засах

• Зураг харуулахгүй:

  Ensure the camera is properly powered and connected to the DVR. Verify that the camera's video output mode matches the DVR's input mode using the OSD joystick as described in Section 5. If still no image, try cycling through all modes on the OSD joystick.

• Зургийн чанар муу:

  Check all cable connections for looseness or damage. Ensure the lens is clean and free from obstructions. Adjust the camera's position to avoid direct glare or reflections. For optimal 1080P resolution, ensure your DVR supports 1080P/1080P Lite/1080N TVI/CVI/AHD/Analog formats.
• Шөнийн хараатай холбоотой асуудлууд:

  Ensure there are no obstructions blocking the IR LEDs. Verify that the camera is receiving adequate power. The IR-Cut filter should automatically switch in low light conditions.

7. Техникийн үзүүлэлтүүд

Image 7.1: Comparison of the camera's color image during the day and black & white image with IR illumination at night, demonstrating its day/night capabilities.

8. Баталгаат хугацаа ба дэмжлэг

This Anlapus security camera comes with a 2 жилийн баталгаат хугацаа. Free lifetime technical support is also provided. For assistance, please refer to the contact information provided with your purchase or visit the official Anlapus support webсайт.