Arducam OV5647

Arducam 5MP OV5647 Camera Module for Raspberry Pi User Manual

Загвар: OV5647

1. Танилцуулга

The Arducam 5MP OV5647 Camera Module is a high-definition video camera designed for various Raspberry Pi models, including Model A, B, B+, 2, 3, 3B+, 4, and 5. It features a 5-megapixel Omnivision OV5647 sensor with a fixed-focus lens, capable of capturing still pictures at 2592 x 1944 resolution and video at 1080p. This module connects to the Raspberry Pi via the dedicated MIPI Camera Serial Interface (CSI) connector, offering a compact and efficient solution for imaging projects.

2. Аюулгүй байдлын мэдээлэл

  • Handle the camera module with care to avoid damage to the lens or circuit board.
  • Ensure the Raspberry Pi is powered off before connecting or disconnecting the camera module.
  • Avoid touching the sensor or lens surface directly to prevent smudges or scratches.
  • Keep the module away from moisture, extreme temperatures, and static electricity.
  • Do not use excessive force when inserting the FPC cable into the CSI connector.

3. Багцын агуулга

Таны багцад бүх зүйл байгаа эсэхийг шалгана уу:

  • 1x Arducam 5MP OV5647 Camera Module
  • 1x 15cm 15-pin to 15-pin FPC Cable
  • 1x 15cm 15-pin to 22-pin FPC Cable (for Raspberry Pi models requiring a 22-pin connector)
  • 1x USB Cable (if included in your specific kit)
Arducam 5MP OV5647 Camera Module with short FPC cable

Image: Arducam 5MP OV5647 Camera Module with a short flexible printed circuit (FPC) cable attached.

Arducam 5MP OV5647 Camera Module with long FPC cable

Image: Arducam 5MP OV5647 Camera Module with a longer flexible printed circuit (FPC) cable attached, showing the full length of the cable.

4. Тохируулах заавар

4.1 Тоног төхөөрөмжийн холболт

  1. Power Off Raspberry Pi: Before connecting the camera, ensure your Raspberry Pi is completely powered off and disconnected from its power source.
  2. Locate CSI Connector: Identify the CSI (Camera Serial Interface) connector on your Raspberry Pi board. This is typically a long, narrow slot.
  3. Нээлттэй холбогч: Gently pull up the plastic clip on the top edge of the CSI connector.
  4. Insert FPC Cable: Carefully insert the FPC cable from the camera module into the CSI connector. Ensure the silver contacts on the cable are facing the correct direction (towards the HDMI port on most Raspberry Pi models). Use the appropriate FPC cable (15-pin or 22-pin) for your specific Raspberry Pi model.
  5. Холбогчийг хаах: Push the plastic clip back down to secure the FPC cable in place.
  6. Асаах: Reconnect the power to your Raspberry Pi.
Arducam 5MP OV5647 Camera Module connected to a Raspberry Pi board

Image: The Arducam 5MP OV5647 Camera Module connected to a Raspberry Pi board via its FPC cable, illustrating the proper hardware connection.

Arducam 5MP OV5647 Camera Module connected to a Raspberry Pi Zero

Image: The Arducam 5MP OV5647 Camera Module connected to a Raspberry Pi Zero board using a different, narrower FPC cable. Note: This cable for Raspberry Pi Zero is typically not included with the standard module and must be purchased separately.

4.2 Програм хангамжийн тохиргоо

After connecting the hardware, you need to enable and configure the camera module in your Raspberry Pi's operating system.

  1. Камерын интерфэйсийг идэвхжүүлэх:
    • Open a terminal on your Raspberry Pi.
    • Командыг ажиллуулна уу: sudo raspi-config
    • руу шилжих Интерфейсийн сонголтууд -> Камер мөн үүнийг идэвхжүүлнэ үү.
    • Reboot your Raspberry Pi when prompted.
  2. Edit config.txt for OV5647: For optimal performance and detection, it is recommended to manually configure the config.txt file.
    • -г нээнэ үү config.txt file using a text editor: sudo nano /boot/config.txt
    • Locate the line camera_auto_detect=1 гэж өөрчлөх camera_auto_detect=0.
    • дор [all] section, add the line: dtoverlay=ov5647
    • Save the changes (Ctrl+O, then Enter for nano) and exit the editor (Ctrl+X).
    • Reboot your Raspberry Pi: sudo reboot
Note on editing config.txt for OV5647 camera module

Image: A visual note detailing the required changes to the Raspberry Pi's config.txt file for the OV5647 camera module, specifically changing 'camera_auto_detect' and adding 'dtoverlay=ov5647'.

Arducam 5MP OV5647 Camera Module with power indicator highlighted

Image: The Arducam 5MP OV5647 Camera Module with a red dashed circle highlighting the power indicator LED (D1) on the circuit board.

5. Ашиглалтын заавар

Once the camera module is connected and configured, you can use various tools to capture images and videos.

5.1 Basic Usage with libcamera (Raspberry Pi OS Bookworm or newer)

  • Take a still picture:libcamera-still -o test.jpg
  • Видео бичлэг хийх:libcamera-vid -t 10000 -o test.h264 (records for 10 seconds)
  • Урьдчилсанview камерын тэжээл:libcamera-hello

5.2 Basic Usage with raspistill/raspivid (Legacy Raspberry Pi OS Bullseye or older)

  • Take a still picture:raspistill -o image.jpg
  • Видео бичлэг хийх:raspivid -o video.h264 -t 10000 (records for 10 seconds)
  • Урьдчилсанview камерын тэжээл:raspistill -t 0

For more advanced options and parameters, refer to the official Raspberry Pi camera documentation online. The camera supports a maximum still picture resolution of 2592 x 1944 and video resolution of 1080p at 30fps.

6. Засвар үйлчилгээ

  • Линз цэвэрлэх: Use a soft, lint-free microfiber cloth specifically designed for optics to gently clean the lens. Avoid using abrasive materials or harsh chemicals.
  • Хадгалах: When not in use, store the camera module in an anti-static bag or a protective case to prevent dust accumulation and physical damage.
  • Кабелийн менежмент: Ensure the FPC cable is not sharply bent or crimped, as this can damage the internal conductors.
  • Байгаль орчны нөхцөл: Operate and store the camera within recommended temperature and humidity ranges to prolong its lifespan.

7. Алдаа засах

  • Камер илрээгүй:
    • Ensure the FPC cable is correctly inserted into both the camera module and the Raspberry Pi's CSI connector, with the silver contacts facing the correct direction.
    • Камерын интерфэйс идэвхжсэн эсэхийг шалгана уу raspi-config мөн тэр нь config.txt modifications (as described in Section 4.2) have been applied and the Pi rebooted.
    • Check if the correct FPC cable (15-pin or 22-pin) is being used for your specific Raspberry Pi model.
    • Test the camera on another Raspberry Pi if available, or try a different FPC cable to rule out component failure.
  • Бүдэг эсвэл муу зургийн чанар:
    • Ensure adequate lighting in the environment. This camera module performs best in well-lit conditions.
    • Камерын линзийг микрофибер даавуугаар зөөлөн арчина.
    • The OV5647 module has a fixed-focus lens. Ensure your subject is within the optimal focus range (1m to infinity).
    • Update your Raspberry Pi OS to the latest version to ensure you have the most recent camera drivers and software.
  • Lens Fell Off / Physical Damage:
    • Physical damage, such as a detached lens, typically indicates a manufacturing defect or improper handling. Contact Arducam support for assistance.

8. Техникийн үзүүлэлтүүд

ОнцлогТодорхойлолт
МэдрэгчOmnivision OV5647, 5 Megapixels
Зургийн нягтрал2592 x 1944 пиксел
Хамгийн их видео нягтрал30fps хурдтай 1080p (1920x1080) нягтралтай
-ийн талбар View54 x 41 градус
Fixed Focus Range1 meter to infinity
ИнтерфэйсMIPI Camera Serial Interface (CSI)
Хэмжээ0.94 x 2.36 x 0.98 inches (approx. 24mm x 25mm for the board)
Жин0.32 унц
Тохиромжтой байдалRaspberry Pi Model A, B, B+, 2, 3, 3B+, 4, 5 (NOT for Pi Zero without specific cable)
Arducam 5MP OV5647 Camera Module dimensions

Image: The Arducam 5MP OV5647 Camera Module with dimensions indicated, showing the board size of approximately 25mm x 24mm.

9. Баталгаат хугацаа ба дэмжлэг

Arducam products are designed for reliability and performance. For warranty information, technical support, or further assistance, please visit the official Arducam webсайт эсвэл харилцагчийн үйлчилгээтэй шууд холбогдоно уу.

Official Arducam Webсайт: www.arducam.com

Холбогдох баримт бичиг - OV5647

Урьдчилсанview Raspberry Pi-д зориулсан ArduCam OV5647 мини камерын модуль: Хурдан эхлүүлэх гарын авлага ба техникийн үзүүлэлтүүд
Raspberry Pi-д зориулсан ArduCam OV5647 мини камерын модулийг судлаарай. Энэхүү гарын авлагад libcamera болон raspistill ашиглан техник хангамж болон програм хангамжийн тохиргооны танилцуулга, загварын хувилбарууд, нийтлэг үзүүлэлтүүд болон хурдан эхлүүлэх зааврыг багтаасан болно.
Урьдчилсанview Raspberry Pi-д зориулсан Arducam Ultra Wide Angle Fisheye 5MP OV5647 камер - Хурдан эхлүүлэх гарын авлага
Raspberry Pi-д зориулсан Arducam Ultra Wide Angle Fisheye 5MP OV5647 камерын модулийн цогц гарын авлага. Raspberry Pi OS Bullseye болон Legacy-д зориулсан libcamera болон raspistill ашиглан техникийн үзүүлэлтүүд, техник хангамжийн тохиргоо, програм хангамжийн тохиргоог хамардаг.
Урьдчилсанview Motofocus бүхий Raspberry Pi-д зориулсан Arducam 5MP камерын модуль
Arducam 5MP камерын модулийн зааварчилгааны гарын авлага (SKU: B0176) Raspberry Pi-д зориулсан тохируулгатай фокус бүхий програмын удирдлагатай моторт линзтэй. Тодорхойлолт, холболтын гарын авлага, програм хангамжийн тохиргоо, алдааг олж засварлах зэрэг орно.
Урьдчилсанview Raspberry Pi камеруудад зориулсан Arducam CSI-ээс HDMI хүртэлх адаптерийн хэрэгсэл: Суурилуулалт ба хэрэглээний гарын авлага
Raspberry Pi камертай Arducam CSI-ээс HDMI адаптерийн иж бүрдлийг суурилуулах, ашиглах талаарх цогц гарын авлага, тохиргоо, нийцтэй байдал болон аюулгүй байдлын урьдчилан сэргийлэх арга хэмжээг хамарсан болно.
Урьдчилсанview ArduCAM-Mini-5MP-Plus OV5642 камерын модулийн хэрэглэгчийн гарын авлага
ArduCAM-Mini-5MP-Plus OV5642 камерын модулийн хэрэглэгчийн гарын авлага нь түүний онцлог, техникийн үзүүлэлтүүд, зүү тодорхойлолтууд, функцууд болон механик хэмжээсүүдийг нарийвчлан харуулсан болно. Энэхүү 5MP SPI камерын модуль нь Arduino болон Raspberry Pi зэрэг янз бүрийн платформуудтай нийцдэг.
Урьдчилсанview Raspberry Pi-д зориулсан Arducam 8MP IMX219 камерын модуль - Хурдан эхлүүлэх гарын авлага
Энэхүү гарын авлага нь Raspberry Pi-тэй Arducam 8MP IMX219 камерын модулийг тохируулах, ашиглахад шаардлагатай мэдээллийг агуулсан бөгөөд техник хангамжийн холболт, програм хангамжийн тохиргоо, үндсэн ажиллагааг хамарна.