Танилцуулга
The Weiser Augusta Handle Set is a stylishly designed exterior door lock system from the Welcome Home series, engineered to provide maximum-security protection for your home. This handleset features a satin nickel finish, offering a modern aesthetic. It can be securely locked or unlocked using a key from the outside, or with a key or turnpiece from the inside. This manual provides comprehensive instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your handle set.
Figure 1: Weiser Augusta Handle Set components, including the exterior handleset with deadbolt and the interior lever, all in a satin nickel finish.
Тохиргоо ба суурилуулалт
This section outlines the steps required to properly install your Weiser Augusta Handle Set. Ensure you have all necessary tools before beginning the installation process.
Шаардлагатай хэрэгслүүд:
- Филлипсийн толгой халив
- Хэмжих соронзон хальс
- Харандаа
- Drill (if new door preparation is needed)
Суулгах алхамууд:
- Хаалгыг бэлтгэх: Ensure your door has a 2-1/8 inch cross bore for the handleset. If installing on a new door, follow standard door preparation guidelines for bore holes and backset.
- Install the Latch and Deadbolt: Insert the latch and deadbolt mechanisms into the door edge. Secure them with the provided screws. Ensure the latch bolt is facing the correct direction for your door swing.
- Assemble Exterior Handleset: Place the exterior handleset through the bore holes, aligning it with the latch and deadbolt.
- Assemble Interior Components: Attach the interior mounting plate and lever assembly. Secure all components with the long through-bolts and screws provided.
- Туршилтын ажиллагаа: Before closing the door, test the deadbolt and latch operation with the key from the outside and the turnpiece/key from the inside. Ensure smooth engagement and retraction.
- Strike Plas суулгах: Install the strike plates on the door frame, aligning them with the latch and deadbolt. Ensure a secure and flush fit.
Ашиглалтын заавар
The Weiser Augusta Handle Set is designed for ease of use and enhanced security.
Түгжих, тайлах:
- Гадна талаас нь: Insert the key into the deadbolt cylinder and turn to lock or unlock. The handle below the deadbolt is a pull handle and does not require a key for entry once the deadbolt is unlocked.
- Дотоодоос: Use the turnpiece on the deadbolt to lock or unlock. The interior lever operates the latch for entry/exit.
SmartKey Re-key Technology:
This handle set features SmartKey re-key technology, allowing you to re-key the lock yourself in seconds. This is useful if you want to match your lock to an existing key or if you lose a key and want to change the lock's keying.
- Одоогийн түлхүүр оруулах: Insert your currently working key fully into the SmartKey cylinder.
- Түлхүүр эргүүлэх: Түлхүүрийг цагийн зүүний дагуу 90 градус эргүүл.
- SmartKey хэрэгслийг оруулах: While the key is turned, insert the SmartKey tool firmly and fully into the small hole on the cylinder face.
- Одоогийн түлхүүрийг устгах: SmartKey хэрэгслийг оруулсан хэвээр байлгаж, одоогийн түлхүүрийг устгана уу.
- Шинэ түлхүүр оруулах: Шинэ түлхүүрээ цилиндрт бүрэн оруулна.
- SmartKey хэрэгслийг устгах: SmartKey хэрэгслийг устгана уу.
- Шинэ түлхүүрийг турших: Rotate the new key 180 degrees counter-clockwise to the original position, then remove it. Test the new key to ensure it operates the lock smoothly.
For a visual guide, please refer to the official Weiser SmartKey re-keying video tutorials available on the Weiser website or authorized channels. (Note: No video provided in JSON, so this is a general suggestion).
Засвар үйлчилгээ
Proper maintenance will ensure the longevity and smooth operation of your Weiser Augusta Handle Set.
- Цэвэрлэгээ: Гаднах гадаргууг зөөлөн, damp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the satin nickel finish.
- Тосолгоо: Periodically apply a silicone-based lubricant (do not use oil-based lubricants) to the internal mechanisms of the lock and deadbolt to ensure smooth operation. Apply sparingly into the keyway and latch bolt.
- Шургийг чангалах: Over time, screws may loosen. Periodically check and tighten all mounting screws to ensure the handleset remains securely fastened to the door. Do not overtighten.
Алдааг олж засварлах
This section addresses common issues you might encounter with your Weiser Augusta Handle Set.
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Түлхүүрийг оруулах эсвэл эргүүлэхэд хэцүү. | Dirt or debris in keyway; worn key; internal mechanism friction. | Clean keyway with compressed air. Apply silicone-based lubricant. Try a new, unworn key. |
| Latch or deadbolt does not retract/extend smoothly. | Misalignment with strike plate; loose screws; lack of lubrication. | Check strike plate alignment and adjust if necessary. Tighten all mounting screws. Lubricate internal mechanisms. |
| Бариул сул байна. | Сул бэхэлгээний эрэг. | Tighten the screws that secure the handleset to the door. |
| SmartKey-н дахин товчлуурууд амжилтгүй боллоо. | Incorrect key insertion/rotation; SmartKey tool not fully inserted; wrong type of key. | Review the SmartKey re-keying steps carefully. Ensure the key is fully inserted and turned 90 degrees. Ensure the SmartKey tool is fully inserted. Use only Kwikset/Weiser keys. |
If you continue to experience issues after attempting these solutions, please contact Weiser customer support.
Үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Загварын дугаар | GLA9471 A/A15 SMT VS |
| Брэнд | Вайзер |
| Өнгө | Сатин никель |
| Материал | Металл |
| Загвар | Орчин үеийн |
| Дуусга | Өнгөлсөн |
| Бүтээгдэхүүний хэмжээ (L x W x H) | 19.2 x 12.55 x 53.75 см |
| Зүйлийн жин | 2.38 кг |
| Суулгах арга | 2-1/8" cross bore |
| ANSI/BHMA гэрчилгээ | Grade 2 (Deadbolt) |
| Онцлог шинж чанарууд | SmartKey түлхүүр дахин тохируулах технологи |
| Батерей шаардлагатай | Үгүй |
| Оруулсан бүрэлдэхүүн хэсгүүд | Keyed Door Lever, Exterior Handleset, Deadbolt, Mounting Hardware |
Баталгаат болон дэмжлэг
Weiser stands behind the quality of its products. Your Augusta Handle Set comes with a comprehensive warranty.
Баталгаат мэдээлэл:
Энэ бүтээгдэхүүн нь а Хязгаарлагдмал насан туршийн баталгаа. This warranty covers defects in material and workmanship for the lifetime of the original residential user. For full details regarding warranty coverage, limitations, and claims procedures, please refer to the official Weiser webсайт эсвэл хэрэглэгчийн дэмжлэгтэй холбоо барина уу.
Хэрэглэгчийн дэмжлэг:
For technical assistance, warranty claims, or general inquiries, please contact Weiser customer support through their official channels:
- Webсайт: Албан ёсны Weiser-т зочлоорой webТүгээмэл асуулт, бүтээгдэхүүний бүртгэл, холбоо барих маягтын сайт. www.weiserlock.com
- Утас: Вайзер руу хандана уу webбүс нутгийн харилцагчийн үйлчилгээний утасны дугаарын сайт.
When contacting support, please have your product model number (GLA9471 A/A15 SMT VS) and purchase information readily available.
