БүртгэлTag UTRIX-16 PDF температурын өгөгдөл бүртгэгч хэрэглэгчийн гарын авлага

1. Танилцуулга

БүртгэлTag UTRIX-16 is a high-performance, multi-use temperature data logger designed for reliable and accurate monitoring across a wide range of applications. This device records temperature data and generates comprehensive PDF reports without requiring special software or hardware. Its integrated USB connector allows for easy data transfer and configuration.

2. Аюулгүй байдлын мэдээлэл

• Do not expose the device to extreme physical shock or vibration.
• Avoid immersing the device in liquids.
• Төхөөрөмжийг нээх эсвэл өөрчлөх гэж бүү оролдоорой, учир нь энэ нь баталгааг хүчингүй болгож, гэмтэл учруулж болзошгүй.
• Орон нутгийн дүрмийн дагуу батерейг хаях.
• Ensure the USB connector is clean and dry before connecting to a computer.

3. Багцын агуулга

Бүх зүйл багцад байгаа эсэхийг шалгана уу:

• БүртгэлTag UTRIX-16 PDF Temperature Data Logger
• Хэрэглэгчийн гарын авлага (энэ баримт бичиг)

4. Төхөөрөмж дууссанview

The UTRIX-16 features a compact design with clear indicators and control buttons.

Зураг 1: Урд view of the LogTag UTRIX-16 PDF Temperature Data Logger. This image displays the device's front panel, showing the "ALERT" and "OK" indicator lights, and the "STOP" and "START/Mark" buttons. The LogTag brand and "USB PDF TEMPERATURE RECORDER" text are visible, along with a serial number barcode.

• ALERT Indicator: Flashes when a pre-configured temperature alert threshold has been exceeded.
• OK Indicator: Flashes to confirm normal operation and within-range temperature readings.
• STOP товч: Press to stop the current logging session.
• START/Mark Button: Press to start a new logging session or to insert a mark into the data stream during logging.
• Integrated USB Connector: Located at the bottom, used for connecting to a computer for configuration and data download.

Зураг 2: БүртгэлTag UTRIX-16 with its integrated USB connector extended. This view highlights the USB-A plug, ready for connection to a computer's USB port, facilitating direct data transfer and device configuration.

5. Тохиргоо

5.1 Анхны тохиргоо

The UTRIX-16 is typically pre-configured for immediate use. However, for custom settings (e.g., logging interval, alert thresholds, start delay), you will need to use the LogTag Analyzer software. This software is available for download from the official LogTag webсайт.

1. Download and install the LogTag Анализаторын програм хангамжаас БүртгэлTag Recorders Software.
2. Connect the UTRIX-16 to a USB port on your computer.


Зураг 3: БүртгэлTag UTRIX-16 data logger connected to a computer's USB port. This illustrates the direct connection method for data download and configuration, eliminating the need for a separate interface cradle.

3. БүртгэлTag Analyzer software should automatically detect the connected device.
4. Follow the on-screen prompts within the software to configure logging parameters as needed.

5.2 Зайны мэдээлэл

The UTRIX-16 uses a CR2 battery (included). The battery is designed for long life and is generally not user-replaceable without specialized tools. If battery replacement is required, it is recommended to contact LogTag support or an authorized service center.

6. Үйл ажиллагаа

6.1 Starting a Logging Session

To start a new logging session:

1. Ensure the device is not currently logging (check the OK/ALERT indicators).
2. -г удаан дар START/Марк button for approximately 5 seconds until the OK indicator flashes rapidly.
3. Release the button. The OK indicator will flash at regular intervals, indicating that logging has started.

6.2 Stopping a Logging Session

To stop an active logging session:

1. -г удаан дар ЗОГС button for approximately 5 seconds until the ALERT indicator flashes rapidly.
2. Release the button. The device will cease logging.

6.3 Marking Data

During an active logging session, you can insert a mark into the data stream:

• товчийг дарна уу START/Марк button (less than 2 seconds).
• A mark will be recorded in the data, visible when the data is downloaded and analyzed.

7. Data Retrieval and Reporting

The UTRIX-16 generates a PDF report directly when connected to a computer.

1. Connect the UTRIX-16 to a USB port on your computer.
2. The device will appear as a removable drive.
3. Locate and open the generated PDF report file. This report contains a summary of the logging session, temperature graphs, and statistical data.
4. For advanced analysis and configuration, use the LogTag Анализаторын програм хангамж.

8. Засвар үйлчилгээ

8.1 Цэвэрлэгээ

Төхөөрөмжийг зөөлөн, d-ээр арчиж цэвэрлэнэ үүamp даавуу. Зүлгүүрийн цэвэрлэгч, уусгагчийг бүү ашигла.

8.2 Батерейг солих

The battery in the UTRIX-16 is designed for extended use and is not intended for user replacement. If the battery life is depleted, contact LogTag support for service options.

9. Алдаа засах

10. Техникийн үзүүлэлтүүд

11. Баталгаат хугацаа ба дэмжлэг

БүртгэлTag products are manufactured to high standards. For warranty information and technical support, please refer to the official LogTag webсайт эсвэл орон нутгийн дистрибьютертэй холбогдоно уу. Худалдан авалтын баримтаа худалдан авалтын баталгаа болгон хадгалаарай.

Official LogTag Webсайт: www.logtag-recorders.com