Aetertek AT-919C-1

Aetertek AT-919C-1 Алсын зайн нохой сургалтын хүзүүвчний хэрэглэгчийн гарын авлага

1. Танилцуулга

Thank you for choosing the Aetertek AT-919C-1 Remote Dog Training Collar. This manual provides essential information for the safe and effective use of your new training system. This system is designed to assist in training and behavior modification for medium to large dogs, offering remote control over sound, vibration, and static correction modes, along with an automatic anti-bark function. Please read this manual thoroughly before operating the device.

Aetertek AT-919C-1 Remote Dog Training Collar with remote transmitter and receiver collar

Image 1.1: Aetertek AT-919C-1 Remote Dog Training Collar components.

2. Багцын агуулга

Доор жагсаасан бүх зүйл таны багцад байгаа эсэхийг шалгаарай.

  • 1 x Алсын дамжуулагч
  • 1 x Receiver Collar (for 1-Dog Kit)
  • 1 x Adjustable Collar Strap
  • 1 x Dual-Head Charging Cable
  • 1 x Set of Long Contact Points
  • 1 x Set of Short Contact Points
  • 1 x Туршилтын гэрлийн хэрэгсэл
  • 1 х хэрэглэгчийн гарын авлага (энэ баримт бичиг)
Contents of the Aetertek AT-919C-1 Remote Dog Training Collar 1-Dog Kit, including remote, receiver, strap, charger, and accessories.

Image 2.1: All components included in the 1-Dog Kit.

3. Бүтээгдэхүүн дууссанview

3.1 Remote Transmitter

  • LCD дэлгэц: Shows battery level, intensity level, and selected dog.
  • Горимын товчлуурууд: Separate buttons for Sound, Vibration, and Static Correction.
  • Эрчимт байдлын тохируулга: Buttons to increase or decrease correction levels.
  • Dog Selection Button: Switch between Dog 1 and Dog 2 (if using a 2-dog system).
  • Magnetic Induction Power Switch: For turning the remote on/off.
  • Туузан хавчаар: Зөөвөрлөхөд тохиромжтой.
Close-up of the Aetertek remote transmitter showing the LCD screen, buttons for different modes, and the magnetic induction power switch.

Image 3.1: Remote Transmitter layout.

3.2 Хүлээн авагчийн хүзүүвч

  • Холбоо барих цэгүүд: Deliver static correction and vibration. Choose long or short based on dog's coat.
  • Magnetic Induction Power Switch: Хүлээн авагчийг асаах/унтраах зориулалттай.
  • Цэнэглэх порт: For recharging the receiver battery.
  • Усны хамгаалалттай дизайн: 100% waterproof and submersible.
Close-up of the Aetertek receiver collar showing the magnetic induction power switch.

Image 3.2: Receiver Collar with magnetic induction power switch.

Ойролцоогоор view of the Aetertek remote transmitter and receiver collar connected, showing the contact points and remote antenna.

Image 3.3: Remote and Receiver Collar connection points.

4. Тохиргоо

4.1 Төхөөрөмжүүдийг цэнэглэх

  1. Connect the dual-head charging cable to both the Remote Transmitter and the Receiver Collar.
  2. Кабелийн USB үзүүрийг стандарт USB цахилгаан адаптер (дагалдахгүй) эсвэл компьютерийн USB порт руу залгаарай.
  3. Allow both devices to charge fully before first use. The indicator lights will change to show charging status (refer to specific light indicators in the full manual for details).
Close-up of the Aetertek receiver collar showing the charging port with the charging cable inserted.

Image 4.1: Receiver Collar charging port.

4.2 Холбоо барих цэгүүдийг хавсаргах

Select the appropriate length of contact points (long or short) based on your dog's coat thickness. The contact points must make direct contact with your dog's skin for effective correction.

  • For dogs with short coats, use the shorter contact points.
  • For dogs with thick or long coats, use the longer contact points.

4.3 Асаах/Унтраах болон хослуулах

  1. To power on the Remote Transmitter and Receiver Collar, hold the magnetic induction power switch on each device until the indicator light illuminates.
  2. To power off, repeat the process until the indicator light turns off.
  3. The devices are typically pre-paired. If re-pairing is needed (e.g., after a full discharge or adding a second collar), follow the specific pairing instructions in the full manual. Generally, this involves holding a button on the receiver while the remote is in pairing mode.

5. Үйлдлийн горимууд

The Aetertek AT-919C-1 offers three distinct training modes: Sound, Vibration, and Static Correction. These can be used independently or in combination to achieve desired training outcomes.

5.1 Sound (Beep) Mode

  • Use the dedicated Sound button on the remote.
  • There are 10 adjustable beep sound levels. Start with a low level and increase as needed.
  • Ideal for issuing warnings, calling your dog, or reinforcing positive behavior.

5.2 Чичиргээний горим

  • Activate using the dedicated Vibration button on the remote.
  • This mode offers 1 strong and humane vibration level.
  • Effective for gaining your dog's attention or as a stronger warning than the sound mode.

5.3 Static Correction (Shock) Mode

  • Engage with the dedicated Static Correction button on the remote.
  • Features 10 levels of progressive static correction, adjusting both intensity and duration.
  • Always start at the lowest level and gradually increase only if necessary. Use this mode for serious behavior issues that other modes have not corrected.

5.4 Automatic Anti-Bark Function

  • The receiver collar includes an automatic anti-bark feature.
  • This function can be switched ON or OFF as desired. Refer to the full manual for specific instructions on activating/deactivating this feature.

5.5 Dog Selection

If you have purchased a 2-Dog Kit or an additional receiver collar, you can switch between controlling Dog 1 and Dog 2 using the dedicated dog selection button on the remote transmitter.

6. Хүзүүвчийг бэхлэх

Proper fit of the receiver collar is crucial for its effectiveness and your dog's comfort and safety.

  1. Position the receiver on the center of your dog's neck, directly under the chin.
  2. Ensure the contact points are touching your dog's skin. You may need to part thick fur to ensure good contact.
  3. The collar should be snug, but not too tight. You should be able to fit two fingers snugly between the collar strap and your dog's neck.
  4. Avoid leaving the collar on for more than 12 hours a day to prevent skin irritation.

7. Сургалтын зөвлөмж

Effective training requires consistency, patience, and positive reinforcement. The Aetertek training collar is a tool to aid in this process, not a substitute for proper training techniques.

  • Start with Basic Commands: Ensure your dog understands basic commands like 'sit', 'stay', and 'come' before introducing the collar for correction.
  • Эерэг бэхлэлт: Always reward desired behaviors with praise, treats, or affection.
  • Тогтвортой байдал нь гол зүйл юм: Use the collar consistently for specific behaviors you want to correct.
  • Low Levels First: Always begin with the lowest effective correction level and only increase if necessary.
  • Short Training Sessions: Keep training sessions short and positive to maintain your dog's engagement.
A collage of dogs performing various positive behaviors, such as fetching a newspaper, sitting patiently, and walking on a leash, illustrating successful training outcomes.

Зураг 7.1: Жишээ ньamples of well-behaved dogs after training.

Video 7.1: Dog Training Collar with 3 Training Modes. This video demonstrates the use of a dog training collar with sound, vibration, and static correction modes, showing how to adjust levels and apply corrections for effective training.

8. Засвар үйлчилгээ

  • Цэвэрлэгээ: Хүлээн авагчийн хүзүүвч, холбоо барих цэгийг зар сурталчилгаагаар тогтмол цэвэрлэamp cloth. Ensure all components are dry before storage or next use.
  • Арьс шалгах: Inspect your dog's neck daily for any signs of irritation or sores from the contact points. If irritation occurs, discontinue use until the skin heals.
  • Батерейны арчилгаа: Fully charge the devices when not in use for extended periods to prolong battery life.

9. Алдаа засах

  • Эрчим хүчгүй: Ensure both the remote and receiver are fully charged. Check the charging cable and adapter.
  • No Correction: Verify the receiver is powered on and the contact points are making proper skin contact. Increase the intensity level gradually.
  • Remote Not Controlling Receiver: Re-pair the remote and receiver according to the full manual's instructions. Ensure they are within the specified range.
  • Dog Not Responding: Check the collar fit and ensure the correction level is appropriate for your dog's temperament and the situation. Re-evaluate training methods.

10. Техникийн үзүүлэлтүүд

  • Загварын дугаар: AT-919C-1
  • Брэнд: Аэтертек
  • Барааны жин: 1.06 фунт
  • Хүрээ: 1100 ярд хүртэл (ойролцоогоор 1000 метр)
  • Усны хамгаалалт: 100% Waterproof and Submersible Receiver Collar
  • Зайны төрөл: Лити полимер (оруулсан)
  • Сургалтын горимууд: Sound (Beep), Vibration, Static Correction
  • Цочролын түвшин: 10 progressive levels (intensity and duration adjustable)
  • Чичиргээний түвшин: 1 level (strong and humane)
  • Beep Levels: Тохируулж болох 10 түвшин
  • Auto Anti-Bark: Yes (ON/OFF switchable)
  • Материал: Metal, Polyurethane
  • Зорилтот үзэгчид: Дунд болон том нохойнууд

11. Баталгаат хугацаа ба дэмжлэг

For warranty information, technical support, or any questions regarding your Aetertek AT-919C-1 Remote Dog Training Collar, please refer to the contact information provided in your product packaging or visit the official Aetertek webсайт. Худалдан авалтын баримтаа баталгаат нэхэмжлэлд зориулж худалдан авалтын баталгаа болгон хадгална уу.

Холбогдох баримт бичиг - AT-919C-1

Урьдчилсанview Aetertek AT-211D алсын зайн нохой сургагч - Хэрэглэгчийн гарын авлага, хурдан эхлүүлэх, алдааг олж засварлах, аюулгүй байдал
Aetertek AT-211D алсын зайн нохой сургагч багшийн цогц гарын авлага, системийн бүрэлдэхүүн хэсгүүд, хурдан эхлүүлэх тохиргооны заавар, нийтлэг асуудлуудыг олж засварлах, сургалтын зөвлөмж, аюулгүй байдлын удирдамж, ашиглалтын нөхцөл, баталгаат хугацааны мэдээллийг багтаасан болно.
Урьдчилсанview Aetertek AT-919C мэргэжлийн алсын удирдлагатай нохой сургагчийн гарын авлага
Энэхүү хэрэглэгчийн гарын авлагад Aetertek AT-919C мэргэжлийн алсын зайн нохой сургагч машинд зориулсан цогц зааварчилгаа өгсөн болно. Энэ нь системийн бүрэлдэхүүн хэсгүүд, тохиргоо, ажиллагаа, алдааг олж засварлах, сургалтын зөвлөмж, аюулгүй байдлын урьдчилан сэргийлэх арга хэмжээ, ашиглалтын нөхцөл, баталгаат хугацааны мэдээллийг нарийвчлан тайлбарласан бөгөөд нохойг үр дүнтэй, аюулгүй сургах боломжийг олгоно.
Урьдчилсанview 2-ын 1 алсын зайнаас нохой сургах ба хуцахаас хамгаалах авто хүзүүвчний ашиглалт, сургалтын гарын авлага
Энэхүү гарын авлагад 2-ын 1 алсын удирдлагатай нохой сургах болон хуцахаас хамгаалах авто хүзүүвчийг ашиглах дэлгэрэнгүй заавар, зөвлөмжийг багтаасан болно. Түүний онцлог, ажиллагаа, аюулгүй байдлын арга хэмжээ, нохойгоо сургах үр дүнтэй аргуудын талаар олж мэдээрэй.
Урьдчилсанview BYVCAS DB600 нохойн сургалтын хүзүүвчний хэрэглэгчийн гарын авлага
BYVCAS DB600 2-ын 1 нохойн сургалтын хүзүүвчний хэрэглэгчийн иж бүрэн гарын авлага нь нохойны зан үйлийг үр дүнтэй удирдахад зориулсан зайнаас сургалт, авто хуцах горим, тохиргоо, тохируулга, алдааг олж засварлах, аюулгүй байдлыг багтаасан.