1. Танилцуулга
The Intermec PM43 is a mid-range industrial label printer designed for reliable performance and ease of use. This printer supports both direct thermal and thermal transfer printing methods, making it versatile for various labeling applications. It features a user-friendly interface, available with either a color touch-screen or universal icons, to simplify operation and reduce training requirements. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your PM43 printer.
Зураг 1: Урд view of the Intermec PM43 printer, showing the control panel and media output slot.
2. Тохиргоо
2.1 Савлах ба байрлуулах
Carefully remove the printer from its packaging. Ensure all packing materials are removed. Place the printer on a stable, flat surface with adequate space around it for ventilation and access to ports and media loading areas.
2.2 Цахилгааныг холбох
- Ensure the printer's power switch is in the OFF (O) position.
- Connect the power cord to the printer's AC inlet.
- Цахилгааны утасны нөгөө үзүүрийг газардуулсан цахилгааны залгуурт холбоно.
2.3 Connecting to a Host System
The PM43 printer supports USB and Ethernet connectivity.
- USB холболт: Принтерийн USB портоос USB кабелийг компьютер дээрх боломжтой USB порт руу холбоно уу.
- Ethernet холболт: Принтерийн Ethernet портоос Ethernet кабелийг сүлжээний чиглүүлэгч эсвэл шилжүүлэгчдээ холбоно уу.
Figure 2: Rear panel of the PM43 printer, illustrating the power inlet, power switch, USB ports, and Ethernet port.
2.4 Медиа ачаалж байна
The PM43 printer can use various media types, including labels, tags, and continuous media. For thermal transfer printing, a ribbon is also required.
- Принтерийн медиа тагийг нээнэ үү.
- Шошгоны ороомгийг хэвлэл мэдээллийн хэрэгслийн гол дээр байрлуулж, шошго нь ороомгийн ёроолоос орж байгаа эсэхийг шалгаарай.
- Thread the media through the guides and under the printhead assembly.
- If using thermal transfer, load the ribbon onto the ribbon supply spindle and thread it according to the internal diagrams.
- Хэвлэл мэдээллийн тагийг хаа.
Зураг 3: Дотоод view of the PM43 printer, highlighting the media and ribbon loading mechanisms.
3. Ашиглалтын заавар
3.1 Асаах/унтраах
- To power on, flip the power switch on the rear panel to the ON (I) position. The printer will perform a self-test.
- To power off, flip the power switch to the OFF (O) position.
3.2 Үндсэн хэвлэх
Once the printer is connected and media is loaded, you can send print jobs from your host system. Ensure the correct printer drivers are installed on your computer.
- Хэвлэхийг хүссэн баримт бичиг эсвэл програмаа нээнэ үү.
- Select the Intermec PM43 printer from the print dialog.
- Adjust print settings (e.g., label size, print density) as needed.
- Хэвлэх ажлыг эхлүүлнэ үү.
3.3 Using the User Interface
The PM43 features either a color touch-screen or a universal-icon interface for direct control and configuration. Navigate through menus to adjust settings such as media calibration, network configuration, and printer status.
4. Засвар үйлчилгээ
4.1 Хэвлэх толгойг цэвэрлэх
Regular cleaning of the printhead is crucial for maintaining print quality and extending the printhead's lifespan. Use a lint-free cloth or a printhead cleaning pen with isopropyl alcohol.
- Power off the printer and disconnect the power cord.
- Хэвлэл мэдээллийн тагийг нээ.
- Gently wipe the printhead element from the center outwards.
- Allow the printhead to dry completely before closing the cover and powering on the printer.
4.2 Хэвлэл мэдээллийн хэрэгсэл болон туузыг солих
Replace media rolls and thermal transfer ribbons as they run out. Refer to section 2.4 for loading instructions. Always ensure the correct media and ribbon types are used for optimal performance.
5. Алдаа засах
This section addresses common issues you might encounter with your PM43 printer.
5.1 Хэвлэх чанар муу
- Faded or incomplete print: Clean the printhead (see section 4.1). Ensure the ribbon (if thermal transfer) is correctly loaded and not depleted. Adjust print density settings.
- Smudged print: Verify media type is compatible. Ensure printhead pressure is correctly set.
5.2 Media Jams
- Принтерийг унтраа.
- Open the media cover and carefully remove any jammed media.
- Ensure media is loaded correctly and guides are properly adjusted.
- Close the cover and power on.
5.3 Холболтын асуудал
- Printer not detected: Check all cable connections (USB/Ethernet). Restart the printer and host system. Verify driver installation.
- Сүлжээний асуудлууд: Confirm network cable is connected. Check network settings on the printer and host system.
6. Техникийн үзүүлэлтүүд
The following table outlines the key technical specifications for the Intermec PM43 printer.
| Онцлог | Тодорхойлолт |
|---|---|
| Загварын нэр | PM43 |
| Хэвлэлийн технологи | Шууд дулааны / дулааны дамжуулалт |
| хэвлэх өнгө | Monochrome (Black) |
| Хамгийн их хэвлэх хурд | секундэд 12 инч |
| Хамгийн их хэвлэх нягтрал | 203 dpi |
| Дэмжигдсэн медиа төрлүүд | Black Mark, Continuous Label, Fanfold, Gap, Label, Linered Label, Linerless, Notch, Roll Fed, Tag |
| Хамгийн их медиа хэмжээ | 4 x 6 инч |
| Холболт | USB-Ethernet |
| Санах ой | 128 MB |
| Хяналтын арга | Touch-screen or Universal-icon interface |
| Бүтээгдэхүүний хэмжээс | 25 x 18 x 16 инч |
| Зүйлийн жин | 1 фунт |
| Эрчим хүчний эх үүсвэр | Хувьсах гүйдлийн хангамж |
| Language Emulation | DSim, Fingerprint, IPL, XML |
Figure 4: Regulatory and compliance labels found on the Intermec PM43 printer.
7. Баталгаат хугацааны мэдээлэл
The Intermec PM43 printer is covered by a limited warranty. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official Intermec support webсайт.
8. Дэмжлэг
For further assistance, technical support, or to download the latest drivers and firmware, please visit the official Intermec support website or contact your authorized Intermec dealer. Ensure you have your printer's model number (PM43A01000000201) and serial number available when seeking support.
