Танилцуулга
Welcome to your new Makita Router 3600HA. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting. Please read it thoroughly before using the tool to ensure proper handling and to prevent injury or damage.
Аюулгүй байдлын чухал заавар
Always adhere to general power tool safety guidelines. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- Бүх зааврыг уншина уу: Familiarize yourself with the tool's functions and operating procedures.
- Хувийн хамгаалах хэрэгсэл (PPE) өмсөх: Always wear eye protection, hearing protection, and a dust mask. Gloves are recommended for handling bits.
- Ажлын талбайг цэвэр байлгах: Эмх замбараагүй эсвэл харанхуй газар осол аваар гарахыг өдөөдөг.
- Аюулгүй ажлын хэсэг: Үргэлж clamp эсвэл ажлын явцад хөдөлгөөн хийхээс сэргийлж ажлын хэсгийг бэхлэх.
- Цахилгааныг салгах: Always unplug the router from the power source before making any adjustments, changing bits, or performing maintenance.
- Багажийг хүчээр ашиглахаас зайлсхий: Let the tool work at its intended speed. Forcing it can lead to overheating and damage.
Бүтээгдэхүүн дууссанview
The Makita Router 3600HA is a robust power tool designed for precise routing tasks in woodworking. It features a 12mm chuck capacity, a shaft lock mechanism for convenient bit changes, and an integrated brake system for enhanced safety and control. The tool's scale ring facilitates accurate and repeatable depth adjustments.
An image of the Makita Router 3600HA, showcasing its robust design and ergonomic handles. The main body is blue and black, typical of Makita power tools.
Тохиргоо
Савлах, шалгах
Carefully remove the router and all included accessories from the packaging. Inspect the tool for any signs of damage that may have occurred during shipping. If any damage is found, do not operate the tool and contact your supplier.
Чиглүүлэгчийн бит суурилуулалт
- Ensure the router is салгасан from the power source to prevent accidental startup.
- -г удаан дар босоо амны түгжээний товчлуур to secure the spindle.
- Өгөгдсөнийг ашиглан Түлхүүр 24, loosen the collet nut by turning it counter-clockwise.
- Insert the desired router bit into the collet. Ensure the bit shank is fully seated into the collet, but do not allow it to bottom out against the spindle.
- While still holding the shaft lock button, firmly tighten the collet nut clockwise with the spanner.
- Release the shaft lock button. Verify the bit is securely held.
Ашиглалтын заавар
Эрчим хүчний холболт
Connect the router's 5-meter power cord to a standard 100V single-phase power outlet. Ensure the outlet is properly grounded.
Гүн тохируулга
- -г суллана depth adjustment knob located on the side of the router.
- Lower the router until the tip of the router bit just touches the surface of your workpiece.
- -ийг тохируулна уу scale ring to the desired cutting depth. Each mark on the scale represents a specific depth increment.
- Securely tighten the depth adjustment knob to lock the chosen depth.
Эхлэх ба зогсоох
- руу эхлэх the router, press the power switch.
- руу зогс the router, release the power switch. The integrated brake system will quickly bring the router bit to a stop, enhancing safety.
Чиглүүлэлтийн техникүүд
- Always perform test cuts on scrap material to verify settings and bit performance before working on your main project.
- Maintain a firm, two-handed grip on the router throughout the operation.
- Move the router smoothly and consistently across the workpiece. Avoid sudden movements or forcing the tool, which can lead to poor cut quality and potential kickback.
- For optimal results and safety, always route in the correct feed direction relative to the bit's rotation.
Засвар үйлчилгээ
Regular maintenance ensures the longevity and safe operation of your Makita Router 3600HA.
- Цэвэрлэгээ: After each use, unplug the tool and clean the router body and all ventilation openings with a soft, dry cloth. Do not use harsh chemicals or solvents.
- Битийн үзлэг: Before each use, inspect router bits for sharpness, damage, or excessive wear. Replace dull or damaged bits immediately to ensure clean cuts and prevent strain on the motor.
- Цахилгааны утас: Periodically check the power cord for any signs of damage, such as cuts, fraying, or exposed wires. If the cord is damaged, have it replaced by a qualified service technician.
- Хадгалах: Store the router in a dry, secure location where it is protected from dust and moisture, and out of reach of children.
Алдааг олж засварлах
Нийтлэг асуудлууд болон тэдгээрийн шийдлүүдийг доорх хүснэгтээс харна уу.
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Чиглүүлэгч эхлэхгүй байна | Цахилгаан хангамж байхгүй | Цахилгааны утас болон цахилгаан залгуурыг шалгана уу. |
| Цахилгаан унтраалга буруу байна | Засварын талаар эрх бүхий үйлчилгээний төвтэй холбоо барина уу. | |
| Bit not cutting cleanly or burning wood | Dull or damaged bit | Replace the router bit. |
| Incorrect cutting depth or feed rate | Adjust cutting depth and reduce feed rate. | |
| Ашиглалтын явцад хэт их чичиргээ | Сул чиглүүлэгчийн бит | Ensure the bit is securely tightened in the collet. |
| Damaged or unbalanced bit | Replace the router bit. | |
| Мотор хэт халалт | Хэрэгслийг хэт ачаалж байна | Reduce the feed rate or depth of cut. Allow the motor to cool. |
| Агааржуулалтын нүхийг хаасан | Clean any dust or debris from the ventilation openings. |
Үзүүлэлтүүд
Technical specifications for the Makita Router 3600HA.
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Загвар | 3600 ГА |
| Брэнд | Макита |
| Чак диаметр | 12 мм |
| Эргэлтийн хурд | 24,000 мин-1 (Татсан цаг) |
| Эрчим хүчний хангамж | Нэг фазын 100 В |
| Одоогийн | 13 А |
| Эрчим хүчний хэрэглээ | 1,240 Вт |
| Бүтээгдэхүүний жин | 4.3 кг |
| Утасны урт | 5 м |
| Стандарт хэрэгслүүд | Straight guide, Template guide 16, Collet sleeve 6, Collet sleeve 8, Spanner 24 (781030-7), Straight bit 8 |
| UPC | 0883810007726 |
