Танилцуулга
Thank you for choosing the sera delta heater DH300. This shock-resistant regulator heater is designed for reliable temperature control in aquariums, featuring a slim design and integrated overheating protection. This manual provides essential information for the safe and efficient operation of your new heater.
Аюулгүй ажиллагааны зааварчилгаа
Please read all safety instructions carefully before operating the device. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always disconnect the heater from the power supply before performing any maintenance, installation, or removal from the aquarium.
- Ensure the heater is fully submerged in water before connecting it to power. Never operate the heater out of water.
- Цахилгааны утас эсвэл залгуур гэмтсэн бол халаагуурыг бүү ашиглаарай.
- Энэ төхөөрөмж нь зөвхөн дотор ашиглахад зориулагдсан бөгөөд ялангуяа аквариумд зориулагдсан.
- Хүүхдийн гар хүрэхгүй газар хадгална.
- Do not attempt to repair or modify the heater yourself. Refer to qualified service personnel.
- Ensure a drip loop is formed with the power cord to prevent water from running along the cord and into the electrical outlet.
Бүтээгдэхүүний онцлог
The sera delta heater DH300 incorporates several key features for optimal performance and safety:
- Shock-Resistant Glass: Constructed from durable, shock-resistant glass for enhanced safety and longevity.
- Нарийхан дизайн: Its particularly thin design allows for discreet placement within the aquarium.
- Хэт халалтаас хамгаалах: Integrated safety mechanism prevents the heater from overheating, protecting both the device and your aquarium inhabitants.
- Статусын үзүүлэлт: A clearly visible LED indicator displays the operating status in three colors:
- Ногоон: Temperature is within the set range (temperature OK).
- Улаан: Heater is actively heating the water.
- Нил ягаан: Overheating protection has engaged.
- Тохируулж болох температурын хүрээ: The heater can be set to maintain temperatures between 18 °C and 32 °C.
- Нэмэлт урт кабель: Equipped with a 1.8-meter power cable for flexible placement.
Image 1: The sera delta heater DH300 (300W) in its retail packaging, showcasing түүний slim profile болон үндсэн шинж чанарууд.
Тохиргоо
- Баглаа задлах: Халаагуурыг савлагаанаас нь болгоомжтой салга. Ил харагдахуйц гэмтэл байгаа эсэхийг шалгана уу.
- Байршил: Position the heater vertically in the aquarium, ensuring it is fully submerged. Use the included suction cups to secure it firmly to the aquarium glass. Ensure good water circulation around the heater for even heat distribution.
- Температурын тохиргоо: Rotate the adjustment knob at the top of the heater to set your desired temperature between 18 °C and 32 °C.
- Эрчим хүчний холболт: Once the heater is securely placed and fully submerged, connect the power plug to a suitable electrical outlet. Ensure a drip loop is formed with the power cord.
- Initial Monitoring: After plugging in, the status indicator will illuminate. Monitor the aquarium temperature with a separate thermometer for the first 24 hours to ensure the heater is maintaining the desired temperature accurately.
Image 2: This chart illustrates recommended heater wattage based on aquarium volume (Liters) and the desired temperature difference (ΔT) from ambient room temperature. For example, to raise a 100-liter aquarium by 10°C, a 100W heater is suggested.
Үйл ажиллагаа
Once installed and powered, the sera delta heater will automatically regulate the aquarium temperature to your set value. The status indicator provides visual feedback:
- Ногоон гэрэл: Indicates that the water temperature is at or very close to the set temperature. The heater is not actively heating.
- Улаан гэрэл: Indicates that the heater is actively working to raise the water temperature to the set point.
- Нил ягаан гэрэл: Indicates that the overheating protection has been activated. This typically happens if the heater is operated out of water or if there's an internal malfunction causing excessive heat. Disconnect power immediately and allow the heater to cool down.
Regularly check the aquarium temperature with a reliable thermometer to ensure consistent conditions for your aquatic life.
Засвар үйлчилгээ
Proper maintenance ensures the longevity and efficiency of your heater.
- Цэвэрлэгээ: Periodically, disconnect the heater from power and remove it from the aquarium. Gently wipe off any algae or mineral deposits from the glass tube using a soft cloth or sponge. Do not use abrasive cleaners or harsh chemicals.
- Шалгалт: Regularly inspect the power cord for any signs of damage (fraying, cuts). Check the suction cups for wear and tear and replace if necessary to ensure secure mounting.
- Усны өөрчлөлт: Always unplug the heater during water changes to prevent it from operating in air, which could trigger the overheating protection or damage the unit.
Алдааг олж засварлах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Heater not heating (no red light) |
|
|
| Purple light is on (overheating protection) |
|
|
| Температурын заалт буруу байна |
|
|
Үзүүлэлтүүд
| Атрибут | Дэлгэрэнгүй |
|---|---|
| Брэнд | сера |
| Загвар | DH300 (300 W) |
| Хүч | 300 ватт |
| Тохируулах температурын хүрээ | 18 ° C - 32 ° C |
| Гол онцлог | Хэт халалтаас хамгаалах |
| Өнгө | Ногоон |
| Form Factor | Нарийхан дизайн |
| Кабелийн урт | 1.8 метр |
| Хэрэглээний орчин | Дотор |
Баталгаат болон дэмжлэг
This product comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, replacement parts, or warranty claims, please contact sera customer service through their official webсайт эсвэл бүтээгдэхүүний сав баглаа боодол дээр заасан холбоо барих мэдээлэл.
Дэлгэрэнгүй мэдээллийг албаны хүнээс авна уу сера webсайт.
