1. Танилцуулга
This instruction manual provides essential information for the proper installation, operation, and maintenance of the Nilfisk Upstream HEPA Filter, model B476567, designed for use with the Nilfisk UZ 964 backpack vacuum cleaner. Please read this manual thoroughly before installation and retain it for future reference.
2. Аюулгүй байдлын мэдээлэл
АНХААРУУЛГА:
- Always disconnect the vacuum cleaner from the power supply before attempting any installation, maintenance, or replacement procedures.
- Ensure the filter is correctly seated and sealed to prevent dust leakage and maintain filtration efficiency.
- Do not attempt to clean or wash the HEPA filter. This can damage the filter media and reduce its effectiveness.
- Dispose of used filters according to local regulations for waste disposal.
3. Бүтээгдэхүүн дууссанview
The Nilfisk Upstream HEPA Filter (model B476567) is a critical component for maintaining air quality during vacuuming with the Nilfisk UZ 964 backpack vacuum. It is designed to capture fine particles, including allergens and dust, preventing them from recirculating into the environment.
- Шүүлтийн үр ашиг: Filters 99.99% of particles at 0.3 microns.
- Тохиромжтой байдал: Specifically designed for the Nilfisk UZ 964 backpack vacuum.
- Чиг үүрэг: Filters fine particles from the vacuumed air as it exits the vacuum's exhaust port.

Figure 1: Nilfisk Upstream HEPA Filter (Model B476567). This image shows the cylindrical HEPA filter with pleated media, designed for high-efficiency particle filtration in compatible Nilfisk vacuum cleaners.
4. Тохиргоо ба суурилуулалт
Follow these steps to properly install the Nilfisk Upstream HEPA Filter into your UZ 964 backpack vacuum:
- Цахилгааныг салгах: Тоос сорогчийг цахилгааны залгуураас салгасан эсэхийг шалгаарай.
- Шүүлтүүрийн тасалгаанд нэвтрэх: Open the filter compartment of your Nilfisk UZ 964 vacuum. Refer to your vacuum's user manual for specific instructions on accessing this area.
- Хуучин шүүлтүүрийг устгах: Carefully remove the old HEPA filter. Be mindful of any accumulated dust. It is recommended to wear gloves and a dust mask during this step.
- Тасалгааг шалгах: Clean any dust or debris from the filter compartment before installing the new filter.
- Шинэ шүүлтүүр суулгах: Insert the new Nilfisk Upstream HEPA Filter (B476567) into the compartment. Ensure it is seated firmly and correctly, creating a tight seal. Do not force the filter into place.
- Хаах тасалгаа: Securely close the filter compartment.
- Цахилгааныг дахин холбох: Одоо тоос сорогч ашиглахад бэлэн боллоо.
5. Үйл ажиллагаа
Once installed, the HEPA filter operates automatically as part of the vacuum cleaner's filtration system. It continuously filters the air passing through the vacuum, ensuring that exhaust air is clean and free of fine particles. No specific user action is required for the filter's operation beyond proper installation.
6. Засвар үйлчилгээ
Regular maintenance of your HEPA filter is crucial for optimal performance and air quality.
- Солих хуваарь: The HEPA filter should be replaced periodically, typically every 6 to 12 months, depending on usage frequency and the type of debris being vacuumed. If you notice a decrease in suction power or an increase in dust escaping the exhaust, it may be time for a replacement.
- Шалгалт: Periodically inspect the filter for visible damage or excessive clogging.
- Цэвэрлэгээ: Do not attempt to clean, wash, or brush the HEPA filter. This can compromise its filtration capabilities. The filter is designed for single-use until replacement is necessary.
- Устгах: Dispose of used filters responsibly according to local environmental guidelines.
7. Алдаа засах
If you encounter issues related to the HEPA filter, consider the following:
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Сорох хүч буурсан | Clogged or old HEPA filter | Replace the HEPA filter with a new one. Ensure proper installation. |
| Dust escaping exhaust | Filter not seated correctly or damaged filter | Check filter installation for a tight seal. If damaged, replace the filter. |
| Шүүлтүүр тохирохгүй байна | Incorrect filter model | Verify that you have the correct Nilfisk Upstream HEPA Filter (Model B476567) for the UZ 964 vacuum. |
8. Техникийн үзүүлэлтүүд
| Атрибут | Дэлгэрэнгүй |
|---|---|
| Брэнд | Нилфиск |
| Загварын дугаар | B476567 (also 140 7160 010) |
| Тохиромжтой байдал | Nilfisk UZ 964 Backpack Vacuum |
| Шүүлтүүрийн үр ашиг | 99.99% at 0.3 microns (DOP-tested) |
| Материал | Цаас |
| Зүйлийн жин | 1 фунт |
| Хэсгийн тоо | 1 |
| Дахин ашиглах боломжтой | Not reusable (designed for replacement) |
9. Баталгаат хугацаа ба дэмжлэг
For specific warranty information regarding your Nilfisk Upstream HEPA Filter, please refer to the documentation provided with your original Nilfisk UZ 964 vacuum cleaner or visit the official Nilfisk website. For technical support or inquiries about replacement parts, please contact Nilfisk customer service directly.
Nilfisk Official Webсайт: www.nilfisk.com





