Бүтээгдэхүүн дууссанview
The Newhouse Hardware WCM120 Wireless Door Chime Kit provides a convenient and reliable solution for your home's entryway. This kit includes a wireless door chime receiver and a push-button transmitter, designed for easy installation and operation.
Гол онцлогууд нь:
- Operating range of up to 75 feet.
- 32 selectable codes to prevent interference from other wireless devices.
- Two selectable chime sounds: Westminster Chime and Ding-Dong.
- Includes a wireless push-button transmitter and two 3-Volt batteries for the transmitter.
Image: The Newhouse Hardware WCM120 Wireless Door Chime Kit, showing the white rectangular chime unit and the smaller white push-button transmitter.
Тохиргоо ба суурилуулалт
1. Батарейг задлах, суурилуулах
Carefully remove all components from the packaging. The kit includes the wireless door chime receiver, the wireless push-button transmitter, and two 3-Volt batteries for the transmitter. Please note that three AAA batteries for the receiver are үгүй орсон бөгөөд тусад нь худалдан авах ёстой.
- Receiver Battery Installation: Locate the battery compartment on the back of the door chime receiver. Insert three AAA batteries, ensuring correct polarity (+/-).
- Дамжуулагчийн батерей суурилуулах: The two 3-Volt batteries for the transmitter are included. Open the transmitter casing and insert the batteries, observing polarity.
Image: All components of the Newhouse Hardware WCM120 Wireless Door Chime Kit laid out, including the chime unit, push-button, mounting screws, wall anchors, and adhesive strip.
2. Хүлээн авагчийг суурилуулах
The door chime receiver can be placed on a flat surface or mounted to a wall. For optimal performance, choose a central location within 75 feet of where the push-button transmitter will be installed.
- Хананд суурилуулах: Use the provided screws and wall anchors to secure the receiver to a wall. Ensure it is mounted securely.
3. Mounting the Push-Button Transmitter
The push-button transmitter is designed for outdoor use and can be mounted near your door. It can be attached using either the included adhesive strip or screws.
- Наалдамхай бэхэлгээ: Clean the surface where you intend to mount the transmitter. Peel the backing from the adhesive strip and firmly press the transmitter onto the desired location.
- Шураг бэхэлгээ: For a more permanent installation, use the provided screws to attach the transmitter to the door frame or wall.
Зураг: Урд view of the Newhouse Hardware WCM120 Wireless Door Chime Kit, showing the chime unit and the push-button side-by-side.
Ашиглалтын заавар
1. Selecting a Chime Sound
The WCM120 offers two distinct chime sounds: Westminster Chime and Ding-Dong. To switch between these sounds, locate the sound selection button or switch on the receiver unit. Press or toggle it to cycle through the available options until you hear your preferred chime.
2. Changing Codes to Prevent Interference
Your wireless door chime kit features 32 selectable codes to help prevent interference from other wireless devices in your vicinity. If you experience false rings or inconsistent operation, you may need to change the operating code.
- Locate the code selection jumpers or switches inside both the receiver and the transmitter units.
- Using a small tool (e.g., a screwdriver), adjust the jumpers/switches in both units to a new, matching code. Both the receiver and transmitter must be set to the same code for the system to function correctly.
- Test the system after changing the code to ensure proper communication.
3. Өдөр тутмын хэрэглээ
Once installed and configured, simply press the push-button transmitter to activate the chime. The receiver will play the selected chime sound.
Засвар үйлчилгээ
Зай солих
Regular battery replacement is essential for consistent performance. The operating range and chime volume may decrease as batteries lose power.
- Хүлээн авагч: Replace the three AAA batteries in the receiver when the chime sound becomes faint or stops working.
- Дамжуулагч: Replace the two 3-Volt batteries in the push-button transmitter if the chime does not activate when the button is pressed, or if the range is significantly reduced.
Орон нутгийн дүрэм журмын дагуу хуучин батерейг үргэлж хариуцлагатайгаар устга.
Алдааг олж засварлах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Chime does not ring when button is pressed. |
|
|
| Chime rings unexpectedly (false rings). |
|
|
| Chime sound is faint or distorted. |
|
|
Үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Загварын дугаар | WCM120 |
| Үйл ажиллагааны хүрээ | 75 фут хүртэл |
| Selectable Codes | 32 |
| Дуу чимээ | Westminster Chime, Ding-Dong |
| Хүлээн авагчийн хэмжээ | 3"W x 4 3/8"H (approx. 7.6cm W x 11.1cm H) |
| Push Button Dimensions | 1"W x 3 5/8"H (approx. 2.5cm W x 9.2cm H) |
| Receiver Battery Requirement | 3 x AAA батерей (оруулаагүй) |
| Transmitter Battery Requirement | 2 x 3-Volt batteries (included) |
| Зүйлийн жин | 4.8 унц (ойролцоогоор 136 грамм) |
| Бүтээгдэхүүний хэмжээс | 4.5 x 2.75 x 1.5 инч (ойролцоогоор 11.4 x 7 x 3.8 см) |
| Өнгө | Цагаан |
Баталгаат хугацааны мэдээлэл
This Newhouse Hardware WCM120 Wireless Door Chime Kit comes with a 2 жилийн баталгаат хугацаа худалдан авсан өдрөөс. Энэхүү баталгаа нь ердийн ашиглалтын үед хийгдсэн материал, хийцийн согогийг хамарна. Баталгаат заргад зориулж худалдан авалтаа нотлох баримтаа үлдээнэ үү.
For detailed warranty terms and conditions, or to initiate a warranty claim, please refer to the official Newhouse Hardware webсайт эсвэл тэдний хэрэглэгчийн дэмжлэгтэй холбогдоно уу.
Хэрэглэгчийн дэмжлэг
Should you encounter any issues or have questions regarding your Newhouse Hardware WCM120 Wireless Door Chime Kit that are not covered in this manual, please contact Newhouse Hardware customer support.
Нэмэлт тусламж авахыг хүсвэл албан ёсны төлөөлөгчтэй танилцана уу Newhouse Hardware Store on Amazon.
