Minka Lavery Camden Square Mini Chandelier (Model 4875-283) Instruction Manual

Аюулгүй байдлын чухал мэдээлэл

Please read these instructions carefully before beginning installation. Failure to follow these instructions could result in electrical shock, fire, or other hazards that could cause injury or property damage.

• Always disconnect power at the main fuse or circuit breaker box before installing, servicing, or cleaning this fixture.
• Хэрэв та суулгах процессын талаар эргэлзэж байвал мэргэшсэн цахилгаанчинтай зөвлөлд.
• This fixture is designed for indoor use only. Do not install in wet or damp байршил.
• Бүх цахилгааны холболтууд нь орон нутгийн хууль тогтоомж, дүрэм журам, түүнчлэн Үндэсний цахилгааны дүрэмд (NEC) нийцэж байгаа эсэхийг шалгаарай.
• The fixture operates on 120 Volts.
• This product is ETL approved for safety in the US and Canada.

Багцын агуулга

Verify that all components are present before beginning assembly. If any part is missing or damaged, do not attempt to assemble or install the fixture.

• Лааны суурь (1)
• Суурилуулах тоног төхөөрөмжийн иж бүрдэл (1)
• 72-inch Chain (1)
• 120-inch Electrical Wire (pre-attached)
• Clear Seeded Glass Panels (pre-installed)

Note: Light bulbs are not included. This fixture requires four (4) B10.5 Candelabra Base (E12) bulbs, maximum 60 watts each.

Суурилуулах заавар

Follow these steps carefully to install your Minka Lavery Camden Square Mini Chandelier.

1. Суулгахад бэлтгэх

1. Turn off the electrical power at the main fuse or circuit breaker box.
2. Ажлын талбайг цэвэрлэж, шаардлагатай багаж хэрэгслийг (халив, утас хуулагч, цахилгаан соронзон хальс, шат) цуглуул.
3. Бэхэлгээ болон түүний эд ангиудыг болгоомжтой задална уу.

2. Mount the Fixture

1. Attach the mounting bracket from the hardware kit to the junction box in the ceiling. Ensure it is securely fastened.
2. Determine the desired hanging height for the chandelier. The fixture's height can be adjusted from 23.5 inches to 94 inches. Adjust the chain length accordingly by removing links if necessary.
3. Thread the electrical wire through the chain and the canopy.
4. Connect the chain to the fixture loop and the canopy loop.

3. Wire the Fixture

1. Connect the fixture's bare copper or green ground wire to the house supply ground wire (usually bare copper or green) using a wire connector.
2. Connect the fixture's white wire to the house supply white (neutral) wire using a wire connector.
3. Connect the fixture's black wire to the house supply black (hot) wire using a wire connector.
4. Бүх утсыг уулзвар хайрцагт болгоомжтой хийнэ үү.
5. Secure the canopy to the mounting bracket, ensuring it sits flush against the ceiling.

4. Гэрлийн чийдэнг суурилуулах

1. Screw four (4) B10.5 Candelabra Base (E12) bulbs (not included) into the sockets. Do not exceed the maximum wattagнэг чийдэнгийн хүч 60 ватт байна.

5. Эрчим хүчийг сэргээх

1. Turn the electrical power back on at the main fuse or circuit breaker box.
2. Зөв ажиллаж байгаа эсэхийг шалгахын тулд угсралтын төхөөрөмжийг туршина уу.

Figure 1: Minka Lavery Camden Square Mini Chandelier (Model 4875-283) installed.

Ашиглалтын заавар

Once installed and powered, the Minka Lavery Camden Square Mini Chandelier operates via a standard wall switch connected to the fixture's circuit. Ensure the correct type and wattage of bulbs are used for optimal performance and safety.

• Use four (4) B10.5 Candelabra Base (E12) bulbs.
• Do not exceed 60 watts per bulb, for a total maximum wattage of 240 watts for the fixture.

Засвар үйлчилгээ

Regular maintenance will help preserve the appearance and functionality of your chandelier.

• Цэвэрлэгээ: To clean the fixture, ensure power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners, polishes, or solvents as they may damage the finish or glass.
• Булцуу солих: Before replacing bulbs, turn off the power to the fixture. Allow bulbs to cool completely. Unscrew old bulbs and replace with new B10.5 Candelabra Base (E12) bulbs, not exceeding 60 watts each.

Алдааг олж засварлах

Хэрэв та лааны суурьтай холбоотой асуудалтай тулгарвал дараах нийтлэг асуудал болон шийдлүүдийг үзнэ үү.

If problems persist after attempting these solutions, contact a qualified electrician for assistance.

Үзүүлэлтүүд

Баталгаат болон дэмжлэг

Minka Lavery products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included with your purchase or visit the official Minka Lavery webсайт.

For further assistance, you may contact Minka Lavery customer service directly. Keep your purchase receipt and model number (4875-283) handy for quicker service.

Онлайн нөөцүүд: Visit the Minka Lavery Store on Amazon