Acme Lancaster Queen Bed Instruction Manual

1. Бүтээгдэхүүн дууссанview

The Acme Lancaster Queen Bed is designed to provide a stylish and functional sleeping solution. This bed features a PU padded headboard with an espresso finish, complementing various bedroom decors. The construction emphasizes durability, making it a reliable addition to your home.

Figure 1: Assembled Acme Lancaster Queen Bed.

This image displays the fully assembled Acme Lancaster Queen Bed, showcasing its espresso finish frame and the dark, padded headboard. The bed is shown without bedding, highlighting its structural design.

2. Аюулгүй байдлын мэдээлэл

• Угсарч хэрэглэхийн өмнө бүх зааврыг анхааралтай уншина уу.
• Тоног төхөөрөмжийн бүх эд ангиудыг хүүхдүүдийн хүрч очих газаргүй байлгах.
• Хэрэглэхийн өмнө бүх боолт, боолтыг сайтар чангалах хэрэгтэй. Үе үе шалгаж, шаардлагатай бол дахин чангална.
• Do not use power tools for assembly unless specifically instructed, as over-tightening can damage components.
• Assemble the bed on a soft, clean surface (e.g., carpet) to prevent scratching.
• Two people are recommended for assembly to ensure safety and ease of handling.
• This bed requires a box spring for proper mattress support.

3. Багцын агуулга

Угсарч эхлэхийн өмнө доор жагсаасан бүх бүрэлдэхүүн хэсгүүд байгаа эсэхийг шалгаарай. Хэрэв ямар нэг хэсэг дутуу эсвэл гэмтсэн бол хэрэглэгчийн тусламжтай холбоо барина уу.

• Толгойн тавцан (1)
• Хөлийн тавцан (1)
• Хажуугийн хашлага (2)
• Slats (5)
• Supporting Legs for Slats (5)
• Тоног төхөөрөмжийн багц (Боолт, Угаагч, Самар, Аллен түлхүүр)

4. Тохируулах, угсрах заавар

Assembly requires two adults. Please follow these steps carefully.

1. Бүрэлдэхүүн хэсгүүдийг задлах: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent damage. Identify each component using the parts list.
2. Хажуугийн хашлагыг самбарын толгойд бэхлэх: Align the side rails with the pre-drilled holes on the headboard. Secure them using the provided bolts, washers, and nuts. Do not fully tighten at this stage.
3. Хажуугийн хашлагыг хөлийн тавцан дээр бэхлэх: Repeat the previous step to attach the other end of the side rails to the footboard. Ensure the footboard's low profile and beveled raised panels are facing the correct direction.
4. Бүх холболтыг чангалах: Once all four corners are connected, carefully tighten all bolts using the provided Allen wrench. Ensure the bed frame is stable and square.
5. Install Slats and Supporting Legs: Place the five slats evenly across the width of the bed frame, resting them on the side rail ledges. Attach the five supporting legs to the center of each slat, ensuring they are firmly in place and make contact with the floor for central support.
6. Эцсийн шалгалт: Verify that all connections are secure and the bed frame is stable before placing a mattress or box spring on it.

Figure 2: Assembled bed frame in a bedroom setting.

This image shows the Acme Lancaster Queen Bed fully assembled, positioned in a bedroom alongside a matching nightstand. It illustrates the bed's appearance once set up.

5. Хэрэглэх заавар

• Box Spring Requirement: This bed is designed to be used with a box spring. Place your queen-sized box spring directly onto the installed slats.
• Матрас байрлуулах: After placing the box spring, position your queen-sized mattress on top of the box spring.
• Жин хуваарилалт: Ensure weight is distributed evenly across the bed. Avoid standing or jumping on the bed to prevent damage to the frame or slats.

6. Засвар үйлчилгээ, арчилгаа

• Хүрээг цэвэрлэх: Wipe the espresso finish frame with a soft, damp даавуу. Хүчтэй химийн бодис эсвэл зүлгүүрийн цэвэрлэгчээс зайлсхий, учир нь эдгээр нь өнгөлгөөг гэмтээж болно.
• Cleaning the Headboard: The PU padded headboard should be cleaned using a dry cloth only. For spills, blot immediately with a clean, dry cloth. Do not use water or liquid cleaners, as per "Dry Clean Only" instruction for the furniture finish.
• Техник хангамжийн шалгалт: Бүх боолт болон шураг чанга байгаа эсэхийг үе үе шалгаж байгаарай. Тогтвортой байдлыг хадгалахын тулд шаардлагатай бол дахин чангална уу.
• Нарны шууд тусгалаас зайлсхийх: Prolonged exposure to direct sunlight can cause fading or damage to the finish and upholstery.

7. Алдаа засах

• Ор ганхаж байна: Ensure all bolts connecting the headboard, footboard, and side rails are fully tightened. Check that the supporting legs for the slats are making firm contact with the floor.
• Чичигнэх чимээ: Squeaking can often be resolved by re-tightening all hardware. If the issue persists, check for any friction points between the box spring/mattress and the frame.
• Дутуу хэсгүүд: If any parts are missing upon unboxing, do not proceed with assembly. Contact Acme customer support immediately for replacement parts.

8. Техникийн үзүүлэлтүүд

9. Баталгаат хугацаа ба дэмжлэг

For warranty information or assistance with your Acme Lancaster Queen Bed, please contact Acme Furniture customer support. Keep your purchase receipt and model number (AC-24570Q) handy when contacting support.

Acme Furniture Customer Support:

• Refer to the contact information provided with your purchase documentation.
• Visit the official Acme Furniture webхамгийн сүүлийн үеийн тусламжийн дэлгэрэнгүй мэдээллийг авах сайт.