Танилцуулга
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your BeA 14/32-613 Pneumatic Stapler, Model 12000215. Please read this manual thoroughly before using the tool to ensure proper handling and to prevent injury or damage.
Image: The BeA 14/32-613 Pneumatic Stapler, a compact and lightweight tool, shown in its typical blue and black finish. It features a comfortable grip and a durable magazine for staples.
Аюулгүй ажиллагааны зааварчилгаа
Always follow basic safety precautions when using pneumatic tools to reduce the risk of injury. Keep this manual for future reference.
- Аюулгүйн шил, сонсголын хамгаалалт зэрэг зохих хувийн хамгаалах хэрэгсэл (PPE) зүү.
- Ажлын байр нь цэвэр, гэрэлтүүлэг сайтай, саад тотгоргүй байх ёстой.
- Disconnect the air supply before making adjustments, clearing jams, or performing maintenance.
- Хэзээ ч багажийг өөртөө болон бусад руу чиглүүлж болохгүй.
- Use only fasteners specified for this tool.
- Хэрэв багаж нь эвдэрсэн эсвэл буруу ажиллаж байвал бүү ажиллуул.
- Keep hands and body parts away from the discharge area.
Бүтээгдэхүүний техникийн үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Загварын дугаар | 12000215 |
| Үдээсний төрөл | 14 type staples |
| Staple Length Range | 5/8" to 1 1/4" |
| Титэм хэмжээ | 7/16" |
| Хэмжигч | 16/17 хэмжигч |
| Ажлын даралт | PSI 75-120 |
| Агаарын хэрэглээ | 0.031 cu. Ft./Cycle @ 90PSI |
| Зүйлийн жин | 3.3 фунт |
| Бүтээгдэхүүний хэмжээс | 7.8 x 2.2 x 10 инч |
| Үйлдлийн горим | Автомат |
| Хүчин чадлын тодорхойлолт | Бүрэн зурвас |
Тохиромжтой бэхэлгээ: 14/15 NK HZ, 14/18 NK HZ, 14/21 NK HZ, 14/25 NK HZ, 14/30 NK HZ, 14/32 NK HZ, 14/32 NRHZ DP.
Тохиргоо болон ачаалалт
1. Агаар хангамжид холбогдох
- Агаарын компрессор унтарсан, агаарын хоолойн даралтыг бууруулсан эсэхийг шалгаарай.
- Connect a suitable air hose (minimum 3/8" I.D.) to the tool's air inlet fitting.
- Set the air compressor pressure regulator to the recommended working pressure of 75-120 PSI. Do not exceed 120 PSI.
- Ашиглалтын өмнө бүх холболтыг гоожиж байгаа эсэхийг шалгана.
2. Үдээсийг ачаалж байна
- Disconnect the tool from the air supply for safety.
- Locate the magazine latch or release mechanism.
- Open the magazine and insert a strip of compatible 14 type staples, ensuring the staple legs face downwards.
- Сэтгүүлийг түгжих хүртэл нь сайтар хаа.
- Агаарын хангамжийг дахин холбоно уу.
Ашиглалтын заавар
The BeA 14/32-613 Pneumatic Stapler is designed for applications such as furniture industry, caravans, general carpentry, pallets and boxes, and paneling.
- Ensure the tool is properly loaded with staples and connected to the air supply.
- Position the nose of the stapler firmly against the workpiece where the staple is to be driven.
- Depress the safety mechanism (if applicable) and then pull the trigger to drive a staple.
- For continuous operation, maintain pressure on the nose and trigger, moving the tool along the workpiece.
- Ашиглалтын явцад багажийг үргэлж чанга барьж байгаарай.
Хөтөчийн гүнийг тохируулах
This model may feature an adjustable depth of drive. Refer to the tool's specific design for the adjustment mechanism, typically a knob or lever near the nosepiece. Test on scrap material to achieve the desired staple depth.
Засвар үйлчилгээ, арчилгаа
Regular maintenance ensures the longevity and optimal performance of your stapler. The tool is designed to be easy to service.
- Өдөр бүр: Add a few drops of pneumatic tool oil into the air inlet before each use. This lubricates internal components.
- Долоо хоног тутмын/Сар тутмын:
- Clean the tool exterior with a damp даавуу. Хатуу уусгагчийг бүү ашигла.
- Inspect the nosepiece and magazine for debris or staple residue and clean as necessary.
- Check all screws and fasteners for tightness and tighten if loose.
- Inspect the air hose and fittings for wear or damage. Replace if necessary.
- Хадгалах: Store the tool in a clean, dry place when not in use. Disconnect from air supply.
Service Instructions and Spare Parts
For detailed service instructions and a complete list of spare parts, please refer to the documentation included with your purchase or contact BeA customer support. Regular servicing by qualified personnel is recommended for complex repairs.
Алдааг олж засварлах
This section addresses common issues you might encounter with your pneumatic stapler.
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Үдээс бүрэн жолоодохгүй байна | Low air pressure; incorrect staple length; worn driver blade. | Increase air pressure (within limits); use correct staple length; contact service for blade replacement. |
| Tool misfires or skips staples | Magazine empty; incorrect staples; debris in magazine; worn feeder. | Reload staples; ensure correct staple type; clean magazine; contact service. |
| Багаж хэрэгслээс агаар гоожиж байна | Loose fittings; damaged O-rings or seals. | Tighten fittings; contact service for seal replacement. |
| Үдээс байнга гацдаг | Bent staples; debris in nosepiece/magazine; worn driver. | Use unbent staples; clear debris (disconnect air first); contact service. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact BeA customer support.
Баталгаат болон дэмжлэг
BeA products are manufactured to high standards and are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official BeA webсайт.
For technical support, spare parts, or service inquiries, please contact BeA customer service through their official channels. When contacting support, please have your model number (12000215) and serial number (if applicable) ready.
BeA Official Webсайт: www.bea-group.com
