RICOO S2544 Universal Full Motion TV Wall Mount Instruction Manual

1. Танилцуулга

This manual provides detailed instructions for the safe and proper installation and operation of your RICOO S2544 Universal Full Motion TV Wall Mount. Please read all instructions carefully before beginning installation to ensure correct setup and to prevent damage or injury.

The RICOO S2544 wall mount is designed for televisions with screen sizes between 32 and 60 inches, supporting VESA mounting patterns from 200x200mm up to 400x400mm, and a maximum weight capacity of 45 kg (99 lbs). It offers full motion capabilities including swivel, tilt, and rotation for optimal viewөнцөг.

Important: Before purchasing and installing, verify the VESA mounting pattern (distance between threaded holes) and weight of your television. The mount is compatible only if your TV's VESA pattern falls within the supported range and its weight does not exceed 45 kg.

2. Аюулгүй байдлын мэдээлэл

Failure to follow these safety instructions can result in property damage, serious injury, or death. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified professional.

• Жингийн багтаамж: Do not exceed the maximum weight capacity of 45 kg (99 lbs). Overloading can cause instability and potential failure.
• Ханын бүтэц: Ensure the mounting surface can safely support the combined weight of the mount and your television. For concrete walls, use the provided concrete anchors. For wood stud walls, ensure the mount is secured into the center of the studs. Do not install on drywall alone.
• Багаж хэрэгсэл: Use appropriate tools for installation. Power tools should be used with caution.
• Ассемблей: Assemble the product according to the instructions. Incorrect assembly may result in accidents or damage.
• Хүүхдүүд: Keep children away from the assembly area. Small parts may be a choking hazard.
• Засвар үйлчилгээ: Холбогч нь найдвартай, бүх бэхэлгээ нь нягт байгаа эсэхийг үе үе шалгана.

3. Багцын агуулга

Carefully unpack the box and ensure all parts are present and undamaged. If any parts are missing or defective, do not attempt to install. Contact customer service for assistance.

• Pre-assembled TV wall mount unit
• Concrete anchors (for concrete walls only)
• Various screws for TV attachment
• Wall mounting screws and accessories
• Нэгдсэн сүнсний түвшин

Зураг 3.1: Дууслааview of the RICOO S2544 TV wall mount and all included mounting hardware, including various screws, washers, spacers, and a spirit level.

4. Техникийн үзүүлэлтүүд

Зураг 4.1: Compatible screen sizes (32-60 inches) and VESA mounting patterns supported by the S2544 mount.

Зураг 4.2: The mount supports a maximum TV weight of 45 kg.

Зураг 4.3: Detailed technical drawing illustrating the dimensions, wall distance, and angular adjustments of the S2544 mount.

5. Тохиргоо ба суурилуулалт

Before installation, ensure you have all necessary tools (e.g., drill, stud finder, screwdriver, level) and that the wall structure is suitable for mounting. It is recommended to have two people for installation.

5.1. Хаалтуудыг зурагтанд бэхлэх

1. Дэлгэц гэмтэхээс сэргийлэхийн тулд ТВ-ээ зөөлөн, цэвэр гадаргуу дээр доош харуулан болгоомжтой байрлуул.
2. Телевизийнхээ арын хэсэгт байрлах VESA суурилуулах нүхийг олоорой.
3. Select the appropriate screws, washers, and spacers from the provided hardware kit that fit your TV's VESA holes.
4. Сонгосон техник хангамжийг ашиглан телевизийн босоо хаалтуудыг телевизийнхээ ар талд бэхлээрэй. Тэдгээрийг найдвартай бэхэлсэн эсэхийг шалгаарай, гэхдээ хэт чангалж болохгүй.

5.2. Ханын хавтанг суурилуулах

1. Determine the desired height and position for your TV on the wall.
2. Use a stud finder to locate wood studs if mounting on a wood stud wall. Mark the center of the studs. If mounting on a concrete wall, mark the desired drill points.
3. Hold the wall plate against the wall at the marked position and use the integrated spirit level to ensure it is perfectly horizontal. Mark the drill holes.
4. Drill pilot holes at the marked locations. For wood studs, drill appropriate size holes. For concrete walls, drill holes and insert the provided concrete anchors flush with the wall surface.
5. Attach the wall plate to the wall using the wall mounting screws. Tighten all screws firmly.

5.3. Зурагтаа өлгөх

1. Тусламжийн тусламжтайгаар зурагтыг хавсаргасан хаалтаар болгоомжтой өргө.
2. Hook the TV brackets onto the wall plate. Ensure the TV is securely seated on the mount.
3. Engage any safety locking mechanisms on the brackets to prevent accidental dislodging.

Зураг 5.1: Illustration of the TV being carefully lifted and attached to the wall mount's arm assembly.

6. Ажиллагаа ба тохируулга

The RICOO S2544 mount offers various adjustments to achieve your desired viewөнцөг.

6.1. Эргэдэг тохируулга

The mount allows for a swivel of up to 180 degrees (90 degrees left and 90 degrees right), depending on the width of your television and its distance from the wall. Gently push or pull the TV to the desired angle.

Зураг 6.1: The TV can be swiveled up to 90 degrees in either direction from the wall.

6.2. Хазайлтыг тохируулах

The TV can be tilted +/- 15 degrees (15 degrees up and 15 degrees down) to reduce glare or optimize viewing from different heights. Loosen the tilt adjustment knobs/screws, set the desired angle, and then re-tighten to secure the position.

Зураг 6.2: The TV can be tilted up or down by 15 degrees for optimal viewing.

6.3. Screen Rotation (Level Adjustment)

The front panel allows for a rotation of +/- 6 degrees, enabling you to fine-tune the TV's level after installation. Loosen the rotation screws, adjust the level, and then re-tighten.

Зураг 6.3: The TV screen can be rotated by 6 degrees to correct for minor leveling issues.

6.4. Wall Distance Adjustment

The articulating arm allows the TV to be positioned at a distance of 80mm (minimum) to 500mm (maximum) from the wall. Extend or retract the arm as needed.

Зураг 6.4: The mount allows for flexible adjustment of the TV's distance from the wall, ranging from 80mm to 500mm.

7. Засвар үйлчилгээ

• Цэвэрлэгээ: Холбогчийг зөөлөн, хуурай даавуугаар цэвэрлэ. Зүлгүүрийн цэвэрлэгч, уусгагчийг бүү ашигла.
• Тогтмол шалгалт: Regularly check all screws and connections to ensure they remain tight and secure. Over time, vibrations or movement can cause fasteners to loosen.
• Хөдөлгөөнт хэсгүүд: The articulating arm and joints are designed for smooth movement. If movement becomes stiff, check for any obstructions or debris. Do not apply lubricants unless specifically instructed by the manufacturer.

8. Алдаа засах

• ТВ түвшин биш байна: Use the screen rotation adjustment (+/- 6 degrees) to fine-tune the level. Ensure all screws are tightened after adjustment.
• Зурагтыг зөөхөд бэрхшээлтэй байдал: Check if any cables are snagged or if the tilt/rotation screws are overtightened. Loosen slightly if necessary, adjust, then re-tighten.
• Уул нь тогтворгүй мэт санагдаж байна: Immediately remove the TV from the mount. Re-check all wall mounting screws and TV attachment screws for tightness. Ensure the wall structure is appropriate and that the mount is properly secured into studs or concrete anchors. Do not re-mount the TV until stability is confirmed.
• Дутуу хэсгүүд: If any parts were missing upon unboxing, do not proceed with installation. Contact RICOO customer support for replacement parts.

9. Баталгаат хугацаа ба дэмжлэг

For warranty information, please refer to the documentation included with your product or visit the official RICOO website. If you require technical assistance or have questions regarding your RICOO S2544 TV wall mount, please contact RICOO customer support through their official channels.