PlayStation VR-д зориулсан PowerA цэнэглэх болон дэлгэцийн станцын зааварчилгааны гарын авлага

Танилцуулга

The PowerA Charge & Display Station is designed to provide a secure and organized solution for your PlayStation VR headset, DUALSHOCK 4 controller, and PlayStation Move controllers. This station allows for simultaneous charging of one DUALSHOCK 4 controller and two PlayStation Move controllers, while also serving as a dedicated display stand for your PlayStation VR headset. This manual provides essential information for proper setup, operation, and maintenance of your device.

Багцын агуулга

• PowerA Charge & Display Station
• АС тэжээлийн хувиргагч

Аюулгүй байдлын мэдээлэл

• Төхөөрөмжийг ажиллуулахын өмнө бүх зааврыг уншина уу.
• Төхөөрөмжийг ус эсвэл хэт их чийгээс хол байлга.
• Төхөөрөмжийг задлах, өөрчлөхийг бүү оролд.
• Зөвхөн дагалдаж ирсэн AC тэжээлийн адаптерийг ашиглана уу.
• Ашиглалтын явцад төхөөрөмжийн эргэн тойронд агааржуулалт сайтай байх ёстой.
• Place the station on a stable, flat surface to prevent tipping.

Тохиргоо

1. Станцыг задлах: Сав баглаа боодолоос бүх бүрэлдэхүүн хэсгүүдийг болгоомжтой арилгана.
2. Assemble the Station: Connect the vertical stand to the base unit. Ensure it clicks securely into place.
3. Эрчим хүчийг холбох: Insert the small end of the AC power adapter into the power input port located at the rear of the station's base.
4. Цахилгааны кабелийн чиглэл: Utilize the cable management grooves on the underside of the base to route the power cable neatly. There are grooves for rear, left, and right exits.
5. Залгуурт залгаарай: Хувьсах гүйдлийн тэжээлийн адаптерийг ердийн ханын залгуурт холбоно уу.

The back of the station, featuring the power input and integrated cable management channels to keep your setup tidy.

Хажуу талын мэргэжлийнfile of the Charge & Display Station, illustrating the support structure for the PSVR headset and the charging docks for controllers.

Ашиглалтын заавар

1. Displaying the PSVR Headset:
   • Gently place your PlayStation VR headset onto the designated cradle at the top of the station.
   • Adjust the headset's band to ensure a secure and stable fit on the stand. This helps prevent accidental slipping.
   • Route the headset's cable around the stand for organized storage.
2. Charging DUALSHOCK 4 Controller:
   • Align the DUALSHOCK 4 controller with the charging port on the front-left dock of the station.
   • Press the controller down firmly onto the spring-loaded connector until it seats properly.
   • A light indicator on the controller will illuminate, confirming that charging has begun.
3. Charging PlayStation Move Controllers:
   • Insert each PlayStation Move controller into its respective charging slot on the front-right of the station.
   • Ensure the controllers are fully seated in the docks for a proper connection.
   • The indicator lights on the Move controllers will show their charging status.

The PowerA Charge & Display Station, fully assembled and ready to hold and charge your PlayStation VR headset, DUALSHOCK 4 controller, and PlayStation Move controllers.

The PlayStation VR headset positioned on its dedicated stand. Adjust the headset band for a secure fit on the display cradle.

Detail of the DUALSHOCK 4 controller charging dock. Ensure the controller is firmly seated for proper connection and charging.

Detail of the PlayStation Move controller charging docks. Place controllers securely into the slots for charging.

Засвар үйлчилгээ

• Цэвэрлэгээ: Disconnect the power adapter before cleaning. Use a soft, dry cloth to wipe the surface of the station. Do not use abrasive cleaners or solvents.
• Хадгалах: When not in use for extended periods, store the station in a cool, dry place.

Алдааг олж засварлах

• Controllers Not Charging:
  • Ensure the power adapter is securely connected to both the station and the wall outlet.
  • Verify that controllers are properly seated in their respective charging docks. For DUALSHOCK 4, ensure it is pressed down firmly onto the spring-loaded connector.
  • Check for any obstructions or debris in the charging ports.
• PSVR Headset Slips Off Stand:
  • Ensure the PSVR headset's adjustable band is tightened to its default or a smaller size when placed on the stand. A loose band may cause the headset to slip.
  • Confirm the station is on a stable, level surface.

Үзүүлэлтүүд

• Загварын дугаар: 1426810-01
• Бүтээгдэхүүний хэмжээ: 13.4 x 9.5 x 5.6 инч
• Барааны жин: 1.88 фунт
• Үйлдвэрлэгч: Хүч А
• Тохиромжтой байдал: PlayStation VR Headset, DUALSHOCK 4 Controller, PlayStation Move Controllers

Баталгаат болон дэмжлэг

For warranty information and technical support, please refer to the official PowerA webсайт эсвэл харилцагчийн үйлчилгээтэй шууд холбогдоно уу. Баталгаат нэхэмжлэл гаргахын тулд худалдан авалтаа нотлох баримтаа хадгалаарай.