Зааварчилгааны гарын авлага

Танилцуулга

The Palmer POCKET AMP BASS (PEPAMPBASS) is a versatile, portable preamp and effects pedal designed for active and passive bass guitars. It offers extensive sound shaping capabilities, making it suitable for various applications including gigging, recording, and practice. This manual provides detailed instructions for its setup, operation, and maintenance.

Аюулгүй байдлын мэдээлэл

• Төхөөрөмжийг ажиллуулахын өмнө бүх зааврыг анхааралтай уншина уу.
• Төхөөрөмжийг бороо, чийгэнд бүү тавь.
• Тохиромжтой агааржуулалтыг хангах; агааржуулалтын нүхийг хааж болохгүй.
• Use only the specified power supply (9V DC, 200mA, center negative).
• Аянга цахилгаантай шуургатай үед эсвэл удаан хугацаагаар ашиглаагүй үед цахилгааныг салга.
• Бүх үйлчилгээг мэргэшсэн үйлчилгээний ажилтнуудад шилжүүлээрэй.

Багцын агуулга

• Palmer POCKET AMP BASS (PEPAMPBASS) unit
• Хэрэглэх заавар (энэ баримт бичиг)
• Тэмдэглэл: Цахилгаан адаптер ороогүй болно.

Хяналт ба холболтууд

Урд талын самбар дээрview

Figure 1: Front panel of the Palmer POCKET AMP BASS, highlighting the input and output connections for instrument, headphones, and auxiliary devices.

• Bass In: 1/4" TS input jack for connecting your bass guitar.
• Normal/PAD -12dB Switch: Selects input sensitivity. Use "PAD -12dB" for active basses with high output to prevent clipping.
• Утас: 1/8" TRS stereo output jack for connecting headphones.
• AUX IN: 1/8" TRS stereo input jack for connecting external audio sources like an MP3 player or smartphone for practice.
• Bass Thru: 1/4" TS output jack for sending the unprocessed bass signal directly to another amplifier or device.

Топ самбарын удирдлага

Figure 2: Top panel of the Palmer POCKET AMP BASS, displaying the various knobs and switches for tone shaping and effects.

• MODE Switch (Fuzz, O.DRIVE, CLEAN): Selects the primary sound mode.
  • ЦЭВЭРЛЭХ: Provides a transparent, uncolored bass tone.
  • O.DRIVE: Adds a warm, natural overdrive.
  • FUZZ: Delivers a thick, aggressive fuzz effect.
• ДРАЙВ Товчлуур: Adjusts the amount of gain or distortion for the O.DRIVE and FUZZ modes.
• BLEND Knob (Dry/Wet): Mixes the direct (dry) signal with the processed (wet) signal. Fully counter-clockwise is 100% dry, fully clockwise is 100% wet.
• SATURATE Knob: Controls the saturation and compression characteristics of the tone.
• VOL товчлуур: Adjusts the overall output volume of the unit.
• F.SW Switch (MUTE/BYPASS): Controls the footswitch function.
  • ХААЛТ: Footswitch mutes the output.
  • ТАВИХ: Footswitch toggles between active effect and true bypass.
• CAB Switch (FLAT, MODERN, VINTAGE): Selects the cabinet simulation type.
  • ХАВТАЙ: No cabinet simulation, providing a raw, direct sound.
  • ОРЧИН: Simulates a modern bass cabinet with full-range response.
  • VINTAGE: Offers a warmer, more colored sound reminiscent of classic bass cabinets.
• BASS бариул: Adjusts the low-frequency response (EQ).
• LEVEL Knob (Mid EQ): Adjusts the gain/cut of the selected mid-frequency.
• FREQ Knob (Mid EQ): Selects the center frequency for the semi-parametric mid-range EQ.
• HIGHS Knob: Adjusts the high-frequency response (EQ).
• Хөлийн унтраалга: Engages/disengages the effect or mutes the output, depending on the F.SW setting.

Арын самбарын холболтууд

Figure 3: Rear panel of the Palmer POCKET AMP BASS, detailing the balanced DI output, effects loop, and power input.

• DI Out (Balanced XLR): Balanced XLR output for direct connection to a mixing console or audio interface.
  • PRE/POST Switch: Determines whether the DI output signal is taken before (PRE) or after (POST) the internal effects and EQ.
  • GND/LIFT унтраалга: Ground lift switch to eliminate hum caused by ground loops.
• TO AMP (1/4" TS): Unbalanced 1/4" TS output for connecting to a bass ampнастан.
• FX Insert (1/4" TRS): Stereo 1/4" TRS jack for connecting external effects pedals in a send/return loop. Tip is Send, Ring is Return.
• DC 9V (200mA, Center Negative): Power input jack for a 9V DC power adapter.

Тохиргоо

1. Эрчим хүчний холболт: Connect a 9V DC, 200mA, center negative power adapter (not included) to the "DC 9V" input on the rear panel. Alternatively, the unit can be powered by a 9V battery (located in the compartment on the bottom).
2. Багажны холболт: Plug your bass guitar into the "Bass In" jack on the front panel. If using an active bass with high output, set the "Normal/PAD -12dB" switch to "PAD -12dB".
3. Гаралтын холболт:
   • For headphones: Connect headphones to the "Phones" jack.
   • нь amplifier: Connect the "TO AMP" jack to your bass ampөргөгчийн оролт.
   • For a mixing console/audio interface: Connect the "DI Out" XLR to the console/interface. Adjust the "PRE/POST" and "GND/LIFT" switches as needed.
4. Туслах оролт: To play along with external audio, connect your audio source (e.g., smartphone) to the "Aux In" jack. The volume of the auxiliary input is controlled by the source device.
5. Эффектийн давталт (заавал биш): To integrate external effects, connect a TRS cable from the "FX Insert" jack to your effects pedal(s). The Tip of the TRS cable is the Send, and the Ring is the Return.

Ашиглалтын заавар

The Palmer POCKET AMP BASS offers a range of controls to shape your bass tone. Experiment with the settings to find your desired sound.

Sound Modes and Drive

• -г ашиглана уу MODE switch to select between CLEAN, O.DRIVE, and FUZZ.
• -ийг тохируулна уу ЖОЛОО knob to control the intensity of the overdrive or fuzz effect. Start with lower settings and increase gradually.
• The SATURE knob adds harmonic richness and compression. Higher settings will increase sustain and density.
• The ХОЛИХ knob allows you to mix your original clean bass signal with the processed signal. This is particularly useful for retaining low-end clarity when using distortion effects.

Тэнцвэржүүлэх (EQ)

• The басс knob boosts or cuts low frequencies.
• The ӨНДӨР knob boosts or cuts high frequencies.
• The mid-range EQ is semi-parametric:
  • -г ашиглана уу FREQ knob to select the specific mid-frequency you wish to adjust.
  • -г ашиглана уу ТҮВШИН knob to boost or cut the selected mid-frequency.

Засгийн газрын загварчлал

• The CAB switch allows you to select between three different cabinet simulations:
  • ХАВТАЙ: Bypasses cabinet simulation.
  • ОРЧИН: Provides a clear, full-range sound typical of modern bass cabinets.
  • VINTAGE: Offers a warmer, more colored sound reminiscent of classic bass cabinets.

Footswitch Functionality

• -г тохируулах F.SW switch to either MUTE or BYPASS to define the footswitch's action.
• Press the footswitch to activate the selected function.

Засвар үйлчилгээ

• Төхөөрөмжийг зөөлөн, хуурай даавуугаар цэвэрлэ. Зүлгүүрийн цэвэрлэгч, уусгагчийг бүү ашигла.
• Төхөөрөмжийг хэт өндөр температур, чийгшил эсвэл нарны шууд тусгалд өртөхөөс зайлсхий.
• When not in use for extended periods, remove the 9V battery to prevent leakage.

Алдааг олж засварлах

Үзүүлэлтүүд

Баталгаат болон дэмжлэг

For warranty information and technical support, please refer to the official Palmer webсайтаас авах эсвэл орон нутгийн дилертэйгээ холбогдоно уу. Баталгаат хугацааны нэхэмжлэлийн талаар худалдан авалтын баримтаа хадгална уу.

Нэмэлт тусламж авахыг хүсвэл зочилж болно Palmer Store on Amazon.