Loctite 620 Retaining Compound Instruction Manual

1. Танилцуулга

The Loctite 620 Retaining Compound is a high-strength, high-temperature anaerobic adhesive designed for bonding cylindrical fitting parts. This product is formulated to lock and secure metal cylindrical assemblies, prevent metal fretting and corrosion, and seal against leakage. It is suitable for applications requiring high temperature resistance and robust bonding.

2. Бүтээгдэхүүн дууссанview

Image: Loctite 620 Retaining Compound in a 10 mL bottle. This green-colored adhesive is used for securing cylindrical metal parts.

Loctite 620 is a high-viscosity liquid retaining compound. Key characteristics include:

• Өнгө: Ногоон
• Gap Fill: Up to 0.015 inches (0.38 mm) maximum
• Зуурамтгай чанар: 8500.0 cP
• Shear Strength: 3800 psi
• Температурын хүрээ: -65.0°F (-54°C) - 450.0°F (232°C)
• Chemical Compound: Acrylic Ester
• Хатууруулах арга: Anaerobic (cures in the absence of air when confined between close-fitting metal surfaces)
• Хэрэглээ: Cylindrical joint assemblies
• Applicable Materials: Steel, Most Metals
• Үнэр: Зөөлөн
• Эсэргүүцэл: Acetone, Brake Fluid, Corrosive Process, Heat, Unleaded Petrol, Wear
• Packing Type: Лонх
• Эзлэхүүн: 10 мл

3. Аюулгүй байдлын мэдээлэл

Always prioritize safety when handling chemical products. Consult the Material Safety Data Sheet (MSDS) for comprehensive safety information before use. The MSDS for Loctite 620 Retaining Compound (e.g., 62015 Retaining Compound Slip Fit 620.pdf) provides detailed guidance on safe handling, storage, and emergency procedures.

• Хувийн хамгаалах хэрэгсэл: Wear appropriate gloves and eye protection (safety glasses or goggles) to prevent skin and eye contact.
• Агааржуулалт: Уурыг амьсгалахаас зайлсхийхийн тулд агааржуулалт сайтай газар хэрэглэнэ.
• Хадгалах: Store in a cool, dry place, away from direct sunlight and incompatible materials. Keep container tightly closed when not in use.
• Анхны тусламж: In case of contact, refer to the MSDS for specific first aid measures.
• Устгах: Dispose of product and packaging in accordance with local, regional, national, and international regulations.
• Гар хүрэхгүй байх: Хүүхэд, тэжээвэр амьтдын гар хүрэхгүй газар хадгална уу.

4. Setup and Surface Preparation

Proper surface preparation is critical for optimal performance of the retaining compound.

1. Цэвэр гадаргуу: Thoroughly clean all mating surfaces to remove any oil, grease, dirt, or other contaminants. Use a suitable industrial cleaner or degreaser.
2. Хуурай гадаргуу: Ensure all surfaces are completely dry before applying the compound. Moisture can interfere with the curing process.
3. Roughening (Optional): For maximum adhesion on passive metals or large gaps, light abrasion of the surfaces may be beneficial, followed by cleaning.

5. Ашиглалтын заавар (Хэрэглээ)

Follow these steps for effective application of Loctite 620 Retaining Compound:

1. Dispense Compound: Apply a sufficient amount of Loctite 620 Retaining Compound to one or both mating surfaces of the cylindrical assembly. Ensure complete coverage of the bond area.
2. Эд анги угсрах: Quickly assemble the parts. The anaerobic curing process begins when the compound is confined between the metal surfaces in the absence of air.
3. Хатаах хугацаа:
   • Fix Cure Time: Approximately 30 hours at 77°F (25°C). This is the time required for the assembly to achieve sufficient handling strength.
   • Бүрэн эмчлэх хугацаа: Approximately 24 hours at 77°F (25°C). This is the time required for the product to achieve its maximum strength. Note: Cure times can vary depending on temperature, gap, and substrate material.
4. Чуулганы дараах: Avoid disturbing the assembly during the initial fix cure period to ensure proper bonding.

6. Засвар үйлчилгээ ба хадгалах

Зөв хадгалалт нь бүтээгдэхүүний удаан эдэлгээ, үр ашгийг баталгаажуулдаг.

• Хадгалах нөхцөл: Store the Loctite 620 Retaining Compound in its original container in a cool, dry, and well-ventilated area. Ideal storage temperature is between 46°F (8°C) and 82°F (28°C).
• Container Sealing: Keep the bottle tightly closed when not in use to prevent air exposure, which can initiate curing.
• Хадгалах хугацаа: Refer to the product packaging or technical data sheet for specific shelf life information.

7. Алдаа засах

If you encounter issues during application or curing, consider the following:

• No Cure or Slow Cure:
  • Гадаргуугийн цэвэр байдал: Ensure surfaces were thoroughly cleaned and degreased. Contaminants can inhibit curing.
  • Anaerobic Conditions: Verify that the compound is fully confined between metal surfaces with minimal air exposure. Anaerobic adhesives require the absence of air to cure.
  • Температур: Curing speed is temperature-dependent. Lower temperatures will result in slower cure times. Ensure application is within recommended temperature ranges.
  • Субстрат материал: Some metals (e.g., stainless steel, zinc, aluminum) are less active and may cure slower. An activator may be required for passive substrates or large gaps, though not explicitly mentioned for this product, it's a general anaerobic adhesive troubleshooting step.
• Наалдац муу:
  • Gap Size: Ensure the gap between parts is within the specified 0.015-inch maximum. Excessive gaps can lead to incomplete curing and poor strength.
  • Гадаргуугийн бэлтгэл: Re-evaluate surface cleaning and drying procedures.

8. Техникийн үзүүлэлтүүд

9. Баталгаат хугацааны мэдээлэл

Specific warranty details for the Loctite 620 Retaining Compound are not provided within this manual. For information regarding product warranty, please contact Loctite customer support or refer to the official Loctite webсайт.

10. Дэмжлэг ба холбоо барих

For further assistance, technical data sheets, or safety information, please refer to the official Loctite resources.

• Official Loctite Store: Visit the Loctite Store on Amazon
• Материалын аюулгүй байдлын мэдээллийн хуудас (MSDS): Always consult the latest MSDS for detailed safety and handling instructions.
• Техникийн дэмжлэг: Contact Loctite directly for product-specific technical support.