Танилцуулга
Thank you for choosing the Steinel RS 16 LED Ceiling Light. This advanced indoor luminaire features an integrated 360-degree high-frequency motion sensor, providing reliable and automated lighting for various indoor spaces. Designed for energy efficiency and convenience, the RS 16 LED offers a luminous flux of 930 lumens with a low power consumption of just 9.5 watts, potentially saving up to 90% on electricity costs compared to traditional lighting.
Its simple, round design with a PMMA plastic cover ensures ambient light diffusion, making it ideal for hallways, entrance areas, and stairwells. This manual will guide you through the installation, operation, and maintenance of your new Steinel RS 16 LED light.
Figure 1: Steinel RS 16 LED Ceiling Light in a hallway setting.
Тохиргоо ба суурилуулалт
Before beginning installation, ensure the main power supply is switched off to prevent electrical hazards. Installation should be performed by a qualified electrician in accordance with local wiring regulations.
Багцын агуулга:
- 1 x Steinel RS 16 LED Indoor Luminaire with LED system
- 1 x Mounting accessories (screws, wall plugs)
Суулгах алхамууд:
- Суулгах гадаргууг бэлтгэх: Choose a suitable location on the ceiling or wall. Ensure the surface is flat and stable.
- Өрөмдлөгийн цэгүүдийг тэмдэглэх: Use the mounting plate of the luminaire as a template to mark the drilling points on the surface.
- Өрөмдлөгийн цооног: Тэмдэглэсэн газруудад нүх өрөмдөж, ханын залгууруудыг оруулна уу.
- Утас холбох: Connect the electrical wires from the ceiling/wall to the luminaire's terminal block. Ensure correct polarity (Live, Neutral, Earth).
- Гэрэлтүүлэгчийг бэхлээрэй: Attach the luminaire to the mounting surface using the provided screws.
- Диффузорыг хавсаргана уу: Securely fasten the PMMA plastic diffuser cover to the luminaire body.
Figure 2: Technical drawing with dimensions (280mm diameter, 110mm depth) and mounting points.
Figure 3: The RS 16 LED light illuminating a staircase.
Ашиглалтын заавар
The Steinel RS 16 LED features a high-frequency motion sensor that detects movement across a 360-degree area, even through glass, wood, and light walls. This allows the light to activate automatically before you even enter the room.
Тохиргоог тохируулах:
The following settings can be adjusted using a small slotted screwdriver on the control dials located on the luminaire's base (refer to the product diagram for exact location):
- Reach/Range: Adjust the detection range from approximately 3 meters to 8 meters in diameter. This controls how far the sensor detects movement.
- Twilight Setting (Lux): Set the ambient light level at which the sensor becomes active. This can be adjusted from 2 lux (dark) to 2000 lux (daylight). The light will only activate when the ambient light falls below this set threshold.
- Гэрэлтүүлгийн үргэлжлэх хугацаа: Determine how long the light remains on after motion is detected and no further motion is registered.
Networking Feature:
The RS 16 LED supports networking with up to 10 other compatible Steinel indoor luminaires. This feature allows multiple lights to switch on simultaneously when motion is detected by any networked unit, providing seamless illumination for long corridors, large stairwells, or open-plan areas.
Figure 4: Key features and specifications of the RS 16 LED.
Засвар үйлчилгээ
The Steinel RS 16 LED is designed for long-term, low-maintenance operation. The integrated LED system has an average lifespan of 50,000 hours, reducing the need for frequent bulb replacements.
Цэвэрлэгээ:
To clean the luminaire, gently wipe the surface with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the plastic cover or electronic components. Ensure the power is off before cleaning.
Гэрлийн эх үүсвэрийг солих:
This product contains a light source. Luminaires containing light sources can be disassembled to separately verify the contained light source(s). This product contains a light source of energy efficiency class E. For any issues with the integrated LED system, please contact Steinel customer support or a qualified electrician.
Алдааг олж засварлах
If you encounter issues with your Steinel RS 16 LED light, please refer to the following common problems and solutions:
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Гэрэл асдаггүй. | No power supply, twilight setting too high, sensor range too low. | Check power connection. Adjust twilight setting to a lower lux value. Increase sensor range. |
| Гэрэл тасралтгүй асдаг. | Continuous motion in detection area, lighting duration set too long, faulty sensor. | Ensure no constant motion. Reduce lighting duration. If problem persists, contact support. |
| Гэрэл нь илэрхий хөдөлгөөнгүйгээр асдаг. | Sensor sensitivity too high, environmental factors (e.g., drafts, small animals). | Reduce sensor range/sensitivity. Ensure proper installation away from strong air currents. |
| Гэрэл анивчдаг. | Unstable power supply, loose wiring. | Check electrical connections. Consult an electrician if power supply is unstable. |
If these solutions do not resolve the issue, please contact Steinel customer support.
Үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Брэнд | Стейнель |
| Загварын дугаар | 008383 |
| Хэмжээ (L x W x H) | 28 x 28 x 11 см |
| Жин | 380 грамм |
| IP үнэлгээ | IP44 |
| Загвар | Detector, LED, PMMA plastic cover |
| Өнгө | Цагаан |
| Материал | Хуванцар |
| Ботьtage | 230 вольт |
| Онцлог шинж чанарууд | Хөдөлгөөн мэдрэгч |
| Булцууны төрөл | LED (нэгдсэн) |
| Гэрлийн урсгал | 930 лм |
| Эрчим хүчний хэрэглээ | 9.5 ватт |
| Өнгөний температур | 4000 Кельвин (Саармаг цагаан) |
| Өнгө дүрслэх индекс (CRI) | 80 |
| Дундаж наслалт | 50,000 цаг |
| Мэдрэгчийн төрөл | High-frequency 360° presence sensor |
| Илрүүлэх хүрээ | 3-8 meters (diameter) |
| Үдшийн бүрий тохиргоо | 2-2000 люкс |
| Суурилуулалтын төрөл | Таазны бэхэлгээ |
| Хэрэглээ | Дотор |
Баталгаат хугацаа
Steinel provides a 3-year manufacturer's warranty for the RS 16 LED Ceiling Light. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, please visit the official Steinel webсайт эсвэл харилцагчийн үйлчилгээтэй холбогдоно уу.
Дэмжлэг
For further assistance, technical support, or to inquire about spare parts, please contact Steinel customer service. You can find contact information on the official Steinel webсайт эсвэл орон нутгийн жижиглэн худалдаалагчаар дамжуулан.
Steinel GmbH
Webсайт: www.steinel.de
