Golden Lighting Parrish One Light Bath Vanity Instruction Manual

Танилцуулга

Худалдан авалт хийсэнд баярлалааasing the Golden Lighting Parrish One Light Bath Vanity. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new light fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Зураг: Урд view of the Golden Lighting Parrish One Light Bath Vanity with seeded glass shade and black finish.

Аюулгүй байдлын мэдээлэл

АНХААРУУЛГА: To avoid electric shock, always turn off power at the main fuse or circuit breaker before installation, removal, or maintenance of the fixture.

• Бүх цахилгааны холболтууд нь орон нутгийн код, тогтоол эсвэл Үндэсний Цахилгааны Код (NEC)-ийн дагуу байх ёстой. Хэрэв та цахилгааны утсыг зөв холбох талаар мэдэхгүй бол мэргэшсэн цахилгаанчинтай зөвлөлдөөрэй.
• This fixture is designed for indoor use and is UL Listed for damp locations. Do not install in areas exposed to direct water spray.
• Зөвхөн заасан чийдэнгийн төрөл ба ватыг ашиглана ууtage хэт халалт болон болзошгүй эвдрэлээс урьдчилан сэргийлэх.
• Do not handle the fixture or components with wet hands.

Багцын агуулга

Verify that all parts listed below are included in your package. If any parts are missing or damaged, please contact customer service before proceeding with installation.

• Бэхэлгээний их бие (1)
• Шилэн сүүдэр (1)
• Суурилуулах тоног төхөөрөмжийн иж бүрдэл (1)
• Зааварчилгааны гарын авлага (1)

Тохиргоо ба суурилуулалт

Follow these steps carefully to install your light fixture.

1. Цахилгааныг унтраах: Before starting, locate the circuit breaker or fuse box and turn off the power to the junction box where the fixture will be installed. Ensure the power is completely disconnected.
2. Бүрэлдэхүүн хэсгүүдийг задлах: Сав баглаа боодолоос бүх хэсгийг болгоомжтой арилгана. Зурааснаас сэргийлэхийн тулд тэдгээрийг цэвэр, зөөлөн гадаргуу дээр тавь.
3. Суулгах бэхэлгээ: Attach the mounting bracket to the electrical junction box using the screws provided in the hardware kit. Ensure the bracket is securely fastened and level.


Зураг: хажуу тал view of the fixture, illustrating the mounting arm and base.

4. Perform Wiring Connections:
   • Бэхэлгээний газардуулгын утсыг (нүцгэн зэс эсвэл ногоон) гэрийн тэжээлийн газардуулгын утастай холбоно уу.
   • Connect the fixture's white wire (neutral) to the house supply white (neutral) wire.
   • Connect the fixture's black wire (hot) to the house supply black (hot) wire.
   Secure all connections with wire nuts and wrap them with electrical tape for added safety.
5. Бэхэлгээний их бие: Carefully tuck all wires into the junction box. Align the fixture's base with the mounting bracket and secure it using the provided screws or decorative nuts. Ensure the fixture is flush against the wall and stable.
6. Шилэн сүүдэр суурилуулах: Place the seeded glass shade over the bulb socket. Secure it in place using the retaining ring or screws, depending on the specific design of your fixture. Do not overtighten.


Зураг: Ойролцоогоор view of the seeded glass shade and bulb socket.

7. Булцууг суулгах: Screw in one E26 base bulb (not included) into the socket. Ensure the bulb does not exceed the maximum wattage of 60 watts for incandescent bulbs, or use an equivalent LED bulb.
8. Эрчим хүчийг сэргээх: Once installation is complete and all components are secure, turn the power back on at the circuit breaker or fuse box.

Ашиглалтын заавар

This light fixture is designed for simple operation via a standard wall switch (not included). Ensure the correct bulb type and wattage are used for optimal performance and safety.

• Асаах/унтраах: Гэрлийг асаах эсвэл унтраахын тулд чийдэнгийн хэлхээнд холбогдсон ханын унтраалгыг ашиглана уу.
• Чийдэнгийн шаардлага: The fixture requires one (1) E26 (medium) base bulb. The maximum allowable wattage for an incandescent bulb is 60 watts. For energy efficiency, consider using an equivalent LED bulb.

Засвар үйлчилгээ

Тогтмол засвар үйлчилгээ нь таны гэрлийн хэрэгслийн гадаад байдал, ажиллагааг хадгалахад тусална.

• Цэвэрлэгээ: To clean the fixture, ensure the power is off and the fixture is cool. Wipe the metal parts with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish. For the glass shade, use a mild glass cleaner applied to a cloth, then wipe the glass. Do not spray cleaner directly onto the fixture.
• Булцуу солих: Always turn off the power at the circuit breaker and allow the bulb to cool completely before attempting to replace it. Carefully unscrew the old bulb and screw in a new E26 base bulb, ensuring it does not exceed the maximum 60-watt incandescent rating.

Алдааг олж засварлах

Хэрэв та гэрэлтүүлгийн төхөөрөмжтэй холбоотой асуудал гарвал дараах нийтлэг асуудал, шийдлүүдийг үзнэ үү.

• Light does not illuminate:
  • Check that the power is turned on at the circuit breaker.
  • Ensure the bulb is screwed in correctly and is not burnt out. Replace if necessary.
  • Verify all wire connections are secure and properly insulated.
• Гэрэл анивчих:
  • Чийдэнг залгуурт бүрэн суулгасан эсэхийг шалгаарай.
  • Check that the bulb wattage is within the fixture's specified limits.
  • Inspect wire connections for any loose contacts.

If these steps do not resolve the issue, please contact a qualified electrician or Golden Lighting customer support.

Үзүүлэлтүүд

Баталгаат хугацаа

This Golden Lighting product comes with a Limited Warranty. For specific details regarding warranty coverage, terms, and conditions, please contact Golden Lighting directly or refer to their official webсайт.

Хэрэглэгчийн дэмжлэг

If you have any questions, require assistance with installation, or need to report a missing or damaged part, please contact Golden Lighting customer service. Provide your model number (8001-BA1 BLK-SD) when contacting support for faster service.