1. Танилцуулга
This manual provides detailed instructions for the installation, operation, and maintenance of the CDVI 433MHz Radio Keypad (Digicode) and its associated SEL2641R433NN 1-Relay 12V Receiver. This system is designed for secure access control applications.
Зөв ажиллагаа, аюулгүй байдлыг хангахын тулд аливаа суурилуулалт эсвэл үйл ажиллагааг эхлүүлэхийн өмнө энэхүү гарын авлагыг сайтар уншина уу.
Figure 1: CDVI 433MHz Radio Keypad and SEL2641R433NN Receiver. The image shows the silver-colored keypad with illuminated blue numbers (0-9, A, B, C) and a transparent plastic receiver unit.
2. Аюулгүй байдлын мэдээлэл
- Суурилуулах эсвэл засвар үйлчилгээ хийхээс өмнө бүх цахилгааныг салгасан эсэхээ шалгаарай.
- Суурилуулалтыг зөвхөн мэргэшсэн ажилтан гүйцэтгэнэ.
- Do not expose the keypad or receiver to extreme temperatures, moisture, or direct sunlight.
- Use only specified power supply (12V).
- Хүүхдийн гар хүрэхгүй газар хадгална.
3. Тохиргоо ба суурилуулалт
3.1. Бүрэлдэхүүн хэсгүүд дууссанview
The system consists of two main components:
- Radio Keypad (Digicode): The input device for entering access codes.
- SEL2641R433NN Receiver: The unit that receives signals from the keypad and controls the access mechanism (e.g., door lock).
3.2. Товчлуурыг суурилуулах
- Choose a suitable mounting location, typically near the access point, ensuring it is protected from direct weather exposure if outdoors.
- Mark the drilling points using the keypad's mounting plate as a template.
- Нүх өрөмдөж, хананд тохирох залгуурыг оруулна.
- Хананд бэхлэх хавтанг бэхлээрэй.
- Attach the keypad securely to the mounting plate.
3.3. Хүлээн авагчийн утсыг холбох
The SEL2641R433NN receiver requires a 12V power supply and connection to the access control device. Refer to the wiring diagram below for typical connections.
- Эрчим хүчний оролт: Connect 12V DC to the designated terminals. Observe polarity.
- Релений гаралт: The receiver has one relay. Connect the Normally Open (NO) or Normally Closed (NC) contacts to your access control device (e.g., electric strike, magnetic lock) as required.
(Note: A detailed wiring diagram is typically provided with the physical product. Consult it for specific terminal assignments.)
4. Ашиглалтын заавар
4.1. Анхны эрчим хүч
Once the receiver is wired and powered, it will enter a standby mode. The keypad will illuminate when a button is pressed.
4.2. Programming Access Codes
The keypad and receiver must be paired, and access codes programmed. This process typically involves:
- Програмчлалын горимд орох: This usually involves a master code or a physical button on the receiver.
- Adding New Codes: Follow the specific sequence to input new user codes (e.g., Master Code + * + New Code + #).
- Кодуудыг устгах: Follow the specific sequence to remove existing user codes.
- Програмчлалын горимоос гарах: Save changes and exit programming mode.
(Note: Refer to the specific programming instructions provided with your product for exact key sequences and procedures, as these can vary by firmware version.)
4.3. Granting Access
To grant access, simply enter a valid programmed code on the keypad. Upon successful code entry, the receiver's relay will activate for a pre-set duration, unlocking the connected device.
5. Засвар үйлчилгээ
- Цэвэрлэгээ: Товчлуурын гадаргууг зөөлөн, d аргаар цэвэрлэнэ.amp даавуу. Зүлгүүрийн цэвэрлэгч, уусгагчийг бүү ашигла.
- Тогтмол шалгалтууд: Periodically check all wiring connections for security and integrity, especially for the receiver unit.
- Кодын удирдлага: Тогтмол дахинview and update access codes for security purposes. Delete codes of former users.
6. Алдаа засах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Товчлуур хариу өгөхгүй байна. | No power to receiver or keypad not paired. | Check 12V power supply to receiver. Ensure keypad is correctly paired with the receiver. |
| Access code not working. | Incorrect code entered, code not programmed, or keypad/receiver not paired. | Verify code. Re-program code. Re-pair keypad and receiver. |
| Door/lock not activating. | Incorrect wiring to lock, faulty lock, or relay issue. | Check wiring connections. Test the lock mechanism independently. Consult a technician if relay is suspected faulty. |
| Short range or intermittent operation. | Radio interference or receiver antenna issue. | Check for sources of radio interference. Ensure receiver antenna is unobstructed. |
7. Техникийн үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Загварын дугаар | SEL2641R433NN, GALEOR1R, F1002000052 |
| Давтамж | 433 МГц |
| Хүлээн авагчийн цахилгаан хангамж | 12V DC |
| Реле гаралт | 1 Relay (NO/NC contacts) |
| Товчлуурын төрөл | Радио (Утасгүй) |
| ASIN | B06VWH6V57 |
8. Баталгаат хугацаа ба дэмжлэг
Information regarding product warranty is typically provided with the purchase documentation or can be found on the manufacturer's official webсайт. Баталгаат заргад зориулж худалдан авалтаа нотлох баримтаа үлдээнэ үү.
For technical support or further assistance, please contact CDVI customer service or your authorized dealer. Contact details can usually be found on the CDVI webсайт (www.cdvi.com).
