AmScope SM-3TZZ-144-10M3

AmScope 3.5X-180X Trinocular Stereo Zoom Microscope Instruction Manual

Model: SM-3TZZ-144-10M3

1. Танилцуулга

This manual provides comprehensive instructions for the AmScope 3.5X-180X Trinocular Stereo Zoom Microscope. This instrument is designed for detailed observation, inspection, and digital imaging across various applications, including research, gemology, engraving, and electronics. Please read this manual thoroughly before operating the microscope to ensure proper setup, safe use, and optimal performance.

2. Аюулгүй байдлын мэдээлэл

3. Багцын агуулга

Савлахдаа бүх бүрэлдэхүүн хэсгүүд байгаа бөгөөд гэмтэлгүй эсэхийг шалгана уу:

4. Тохиргоо ба угсралт

Follow these steps to assemble your AmScope microscope:

4.1. Boom Stand Assembly

  1. Place the heavy base on a stable workbench.
  2. Insert the vertical pillar into the hole on the base and secure it with the locking screw from underneath the base.
  3. Attach the horizontal boom arm to the vertical pillar using the provided clamp and knobs. Ensure it is securely tightened.
Assembled AmScope Trinocular Stereo Zoom Microscope on a single-arm boom stand.

Figure 1: Fully assembled AmScope Trinocular Stereo Zoom Microscope with boom stand.

4.2. Microscope Head Installation

  1. Carefully remove the microscope head from its packaging.
  2. Loosen the locking screw on the microscope head holder located at the end of the boom arm.
  3. Insert the microscope head into the holder, ensuring it is seated firmly.
  4. Tighten the locking screw to secure the microscope head in place.
  5. Insert the widefield eyepieces into the ocular tubes.
Хажуу тал view of the AmScope Trinocular Stereo Zoom Microscope head mounted on the boom stand.

Figure 2: Microscope head mounted on the boom arm, showing focus and zoom controls.

4.3. LED Ring Light Installation

  1. Slide the 144-LED ring light onto the objective lens housing of the microscope head.
  2. Secure it with the small set screws on the ring light, ensuring it is centered and stable.
  3. Connect the ring light cable to the dimmer control box.
  4. Connect the power adapter to the dimmer control box and then plug it into a power outlet.
AmScope 144-LED ring light with dimmer control box and power cable.

Figure 3: The 144-LED ring light and its control unit.

4.4. Digital Camera Setup

  1. Remove the protective cap from the trinocular port on the microscope head.
  2. Insert the 10MP USB3 digital camera into the trinocular port. Ensure it is seated correctly.
  3. Connect the USB3 cable from the camera to an available USB3 port on your computer.
  4. Install the camera software from the provided CD or download it from the AmScope webсайт. Суулгахын тулд дэлгэцэн дээрх зааврыг дагана уу.

5. Ашиглалтын заавар

5.1. Powering On and Illumination

5.2. Adjusting Magnification and Focus

5.3. Using the Digital Camera

6. Засвар үйлчилгээ

7. Алдаа засах

АсуудалБоломжит шалтгаанШийдэл
No illumination from LED ring light.Power not connected; switch off; dimmer set to minimum.Check power connection; turn on switch; increase dimmer setting.
Зураг бүдэг эсвэл фокусгүй байна.Incorrect focus adjustment; eyepieces not adjusted for user's vision.Adjust main focus knob; adjust diopter on eyepieces; ensure specimen is flat.
Dark spots in the field of view.Dust on eyepieces, objective lens, or camera sensor.Clean eyepieces and objective lens. If spots persist, clean camera sensor (refer to camera manual).
Компьютер камер илрүүлээгүй байна.USB cable loose; driver not installed; incorrect USB port.Ensure USB cable is securely connected to a USB3 port; install camera drivers; try a different USB3 port.
Cannot achieve desired magnification.Zoom knob not fully rotated; incorrect auxiliary lens (if applicable).Rotate zoom knob through its full range; ensure correct auxiliary lens is installed (if using).

8. Техникийн үзүүлэлтүүд

9. Баталгаат хугацаа ба дэмжлэг

AmScope products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please contact AmScope customer service directly. Details can typically be found on the official AmScope webсайт эсвэл худалдан авалтын баримт бичгээрээ дамжуулан.

Үйлдвэрлэгч: United Scope, LLC

Холбогдох баримт бичиг - SM-3TZZ-144-10M3

Урьдчилсанview AmScope SM-1 цуврал стерео микроскопын хэрэглэгчийн гарын авлага
SM-1B/T, SM-1TS/BS, SM-1(B/T)-PL зэрэг загваруудын тохируулга, ажиллагаа, техникийн үзүүлэлтүүд болон алдааг олж засварлах зэрэгтэй AmScope SM-1 цувралын стерео микроскопын хэрэглэгчийн дэлгэрэнгүй гарын авлага.
Урьдчилсанview AmScope PM240 цуврал стерео микроскопын хэрэглэгчийн гарын авлага
AmScope PM240 цувралын стерео микроскопуудын хэрэглэгчийн гарын авлага нь дуран болон гурвалжин загваруудын тохиргоо, ажиллагаа, техникийн үзүүлэлтүүд болон алдааг олж засварлах аргуудыг багтаасан болно.
Урьдчилсанview AmScope DM150-W Full HD дижитал нийлмэл микроскопын хэрэглэгчийн гарын авлага
AmScope DM150-W Full HD дижитал нийлмэл микроскопын хэрэглэгчийн иж бүрэн гарын авлага нь оновчтой ашиглах тохиргоо, ажиллагаа, аюулгүй байдал, засвар үйлчилгээ зэргийг багтаасан.
Урьдчилсанview AmScope M150 цуврал микроскопын хэрэглэгчийн гарын авлага
AmScope M150 цуврал микроскопын хэрэглэгчийн гарын авлага нь тохиргоо, ашиглалт, засвар үйлчилгээ, техникийн үзүүлэлтүүд болон алдааг олж засварлах аргуудыг багтаасан.
Урьдчилсанview AmScope 120 цуврал микроскопын хэрэглэгчийн гарын авлага
AmScope 120 цуврал микроскопын хэрэглэгчийн дэлгэрэнгүй гарын авлага нь B120, T120 зэрэг загваруудын тохиргоо, ажиллагаа, техникийн үзүүлэлтүүд болон алдааг олж засварлах аргуудыг багтаасан болно.
Урьдчилсанview AmScope ZM-4 цуврал хэрэглэгчийн гарын авлага: Тохиргоо, ажиллагаа, алдааг олж засварлах
AmScope ZM-4 цуврал стерео микроскопын (ZM-4B, ZM-4T) хэрэглэгчийн дэлгэрэнгүй гарын авлага. Тохиромжтой ашиглахын тулд угсралт, ашиглалт, техникийн үзүүлэлтүүд, засвар үйлчилгээ, алдааг олж засварлах зэрэг багтана.