Einhell TC-SY 700 S Electric Paint Spray Gun User Manual

1. Танилцуулга

The Einhell TC-SY 700 S electric paint spray gun is a semi-stationary system designed for applying lacquers, glazes, and interior wall paints on medium to large work surfaces. This manual provides essential information for safe and efficient operation, setup, maintenance, and troubleshooting of your device.

Please read this manual thoroughly before using the product for the first time and keep it for future reference.

2. Аюулгүй ажиллагааны заавар

WARNING: Always observe general safety precautions when working with paints and spray paints. Failure to do so may result in serious injury or property damage.

• Хувийн хамгаалах хэрэгсэл: Always wear appropriate personal protective equipment, including eye protection (safety goggles), skin protection (gloves and protective clothing), and respiratory protection (mask) to prevent exposure to paint fumes and particles.
• Агааржуулалт: Ensure adequate ventilation in the work area to prevent the buildup of hazardous fumes. Work in a well-ventilated space or use an exhaust fan.
• Шатамхай материал: Do not spray near open flames, pilot lights, or other ignition sources. Many paints and solvents are flammable.
• Цахилгааны аюулгүй байдал: Ensure the power cord is in good condition and avoid using the device in wet conditions. Do not operate the spray gun if the power cord is damaged.
• Хүүхдүүд ба ажиглагчид: Хүүхэд болон хажуугийн хүмүүсийг ажлын талбайгаас хол байлга.
• Даралт тайлах: Always release pressure from the system before cleaning, refilling, or performing any maintenance.
• Зөв шингэрүүлэлт: Always follow the paint manufacturer's instructions for proper dilution and compatibility with spray guns.

3. Багцын агуулга

The Einhell TC-SY 700 S electric paint spray gun package includes the following components:

• Einhell TC-SY 700 S Paint Spray System unit
• 3.8-meter air hose
• Мөрний оосор
• 2 nozzles for different viscosities (lacquer, glaze, paint)
• Purification brush for cleaning the absorption tube
• Purification needle for cleaning the spray nozzle
• Зуурамтгай чанарыг хэмжих аяга
• 1000 ml paint container
• Савны таг

4. Тохиргоо

4.1 Будаг бэлтгэх

1. Ensure your paint is suitable for spray application. Refer to the paint manufacturer's instructions.
2. Use the provided viscosity measuring cup to check the paint's viscosity. Dilute the paint with the appropriate solvent (water for water-based paints, thinner for oil-based paints) until it reaches the recommended viscosity for spraying.
3. Pour the prepared paint into the 1000 ml paint container.

4.2 Assembling the Spray Gun

1. Attach the spray head to the main unit.
2. Select the appropriate nozzle for your paint type and desired spray pattern.
3. Securely attach the paint container to the spray head.
4. Connect the air hose from the main unit to the spray gun handle. The anti-twist air hose design helps prevent tangles.
5. Attach the shoulder strap to the main unit for comfortable portability during use.

5. Үйл ажиллагаа

5.1 Adjusting Spray Pattern and Flow

1. Шүрших загвар: The air cap can be adjusted to achieve three different spray patterns: vertical, horizontal, and circular. Rotate the air cap to select the desired pattern.
2. Paint Flow Regulation: Use the paint flow regulator knob on the spray gun to precisely adjust the amount of paint being applied. Start with a lower setting and increase as needed.

5.2 Шүрших арга

• Hold the spray gun at a consistent distance (typically 15-30 cm) from the surface.
• Шүршигч бууг жигд, жигд хөдөлгөж, дамжуулалт бүрийг ойролцоогоор 50% давхцуулаарай.
• Avoid tilting the spray gun excessively, as this can lead to uneven application or drips.
• Practice on a test surface (e.g., cardboard) to get a feel for the spray pattern and flow before applying to your main project.

6. Засвар үйлчилгээ, цэвэрлэгээ

Proper cleaning after each use is crucial to prevent paint residue buildup and ensure the longevity and optimal performance of your spray gun.

1. Empty Paint Container: After spraying, empty any remaining paint from the container. If you have excess paint, use the provided lid to seal the container for storage.
2. Дизассембл хийх: Detach the spray head from the main unit and disassemble all parts that come into contact with paint (nozzle, air cap, paint container, absorption tube).
3. Цэвэр бүрэлдэхүүн хэсгүүд: Clean all disassembled parts thoroughly with the appropriate cleaning agent (water for water-based paints, solvent for oil-based paints). Use the purification brush for the absorption tube and the purification needle for the spray nozzle to remove any clogs.
4. Угаах, хатаах: Rinse all parts with clean water and allow them to dry completely before reassembling.
5. Дахин угсрах: Reassemble the spray gun, ensuring all parts are correctly fitted.
6. Дэлгүүр: Store the spray gun and its accessories in a clean, dry place. The pull-along trolley design allows for convenient and space-saving storage of the hose.

7. Алдаа засах

8. Техникийн үзүүлэлтүүд

9. Баталгаат хугацаа ба дэмжлэг

This Einhell product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, including the warranty period and coverage details. Spare parts availability is typically 1 year from the date of purchase.

For technical support, service, or to order spare parts, please contact Einhell customer service through their official website or the contact information provided in your product documentation. When contacting support, please have your model number (TC-SY 700 S) and serial number (if applicable) ready.