Stihl MS 201 TC-M Chainsaw Instruction Manual

1. Аюулгүй байдлын мэдээлэл

Operating a chainsaw can be dangerous if proper safety precautions are not followed. Always read and understand the entire instruction manual before operating the Stihl MS 201 TC-M chainsaw. Failure to follow safety instructions can result in serious injury or death.

Хувийн хамгаалах хэрэгсэл (PPE)

• Толгойн хамгаалалт: Wear a safety helmet with face and hearing protection.
• Нүд хамгаалах: Үргэлж хамгаалалтын шил эсвэл нүдний шил зүүж байгаарай.
• Гар хамгаалах: Use heavy-duty work gloves.
• Хөл хамгаалах: Гинжин хөрөөтэй хамгаалалтын өмд эсвэл өмд өмс.
• Хөл хамгаалах: Wear safety boots with steel toes and non-slip soles.

Fuel Handling Safety

• Always mix and handle fuel in a well-ventilated area, away from ignition sources.
• Зөвхөн зөвшөөрөгдсөн түлшний савыг ашигла.
• Шатахуунаар цэнэглэх үедээ тамхи татаж болохгүй.
• Асгарсан түлшийг нэн даруй арчина.

2. Бүтээгдэхүүн дууссанview

The Stihl MS 201 TC-M is a powerful and compact gasoline-powered chainsaw designed for professional tree care and pruning. It features a 35 cm cutting length and is equipped with advanced engine technology for efficient operation.

Figure 2.1: Top-side view of the Stihl MS 201 TC-M chainsaw, highlighting the ergonomic handle and engine housing.

Зураг 2.2: Хажуу тал view of the Stihl MS 201 TC-M chainsaw, showing the Stihl branding and engine components.

3. Тохиргоо

Савлах, угсрах

1. Сав баглаа боодолоос бүх бүрэлдэхүүн хэсгүүдийг болгоомжтой арилгана.
2. Inspect for any shipping damage. If damaged, do not use and contact your dealer.
3. Сав баглаа боодлын жагсаалтад жагсаасан бүх эд ангиуд байгаа эсэхийг шалгаарай.

Bar and Chain Installation

Proper installation of the guide bar and saw chain is crucial for safe and efficient operation.

1. Гинжин тоормосыг салгасан эсэхийг шалгаарай.
2. Remove the chain sprocket cover by loosening the nuts.
3. Хөтөчийн бариулыг тулгуур дээр байрлуулна.
4. Fit the saw chain around the sprocket and into the guide bar groove. Ensure the cutting edges face forward on the top of the bar.
5. Replace the chain sprocket cover and hand-tighten the nuts. Do not fully tighten yet.
6. Adjust chain tension (refer to 'Chain Tension Adjustment' in Section 5).
7. Fully tighten the chain sprocket cover nuts.

Зураг 3.1: Ойрын зураг view of the chainsaw's chain and guide bar, illustrating proper assembly.

Fuel and Chain Oil Filling

The MS 201 TC-M operates on a gasoline-oil mixture and requires chain lubricant.

• Шатахуун: Use a high-quality unleaded gasoline mixed with Stihl 2-stroke engine oil at the recommended ratio (typically 50:1). Refer to the fuel tank cap for specific ratios.
• Гинжний тос: Fill the chain oil tank with high-quality bar and chain lubricant. Do not use waste oil.

Ensure both caps are securely tightened after filling.

4. Ашиглалтын заавар

Chainsaw эхлүүлж байна

1. Place the chainsaw on a firm, level surface.
2. Урд талын хамгаалалтыг урагш түлхэж гинжин тоормосыг ажиллуулна уу.
3. Set the master control lever to the cold start position (choke).
4. Hold the chainsaw firmly with one hand on the front handle and place your foot on the rear handle.
5. Pull the starter cord slowly until resistance is felt, then pull briskly until the engine fires briefly.
6. Move the master control lever to the half-throttle position.
7. Хөдөлгүүр эхлэх хүртэл асаагуурын утсыг дахин тат.
8. Blip the throttle to disengage the half-throttle and return to idle.
9. Зүсэх үйлдлийг эхлүүлэхийн өмнө гинжин тоормосыг салга.

Chainsaw-г зогсоох

To stop the engine, move the master control lever to the STOP position.

Гинжин тоормосны ажиллагаа

The chain brake is a critical safety feature. It can be engaged manually by pushing the front hand guard forward or automatically by inertia during kickback. Always ensure the chain brake is functional before each use.

5. Засвар үйлчилгээ

Regular maintenance ensures the longevity and safe operation of your Stihl MS 201 TC-M chainsaw.

Гинжний хурцадмал байдлыг тохируулах

Correct chain tension is vital. A loose chain can derail, and an overly tight chain can cause premature wear to the bar and chain, and reduce engine power.

1. Loosen the nuts on the chain sprocket cover.
2. Using the tensioning screw, adjust the chain until it fits snugly against the underside of the guide bar, but can still be pulled around by hand.
3. Lift the tip of the guide bar slightly while tightening the nuts on the chain sprocket cover.
4. Check tension again.

Гинж хурцлах

A sharp chain is essential for efficient and safe cutting. Sharpen the chain regularly or have it professionally sharpened.

Агаарын шүүлтүүр цэвэрлэх

Clean the air filter regularly to maintain engine performance and prevent damage. Remove the filter cover and clean the filter element with warm soapy water or compressed air. Replace if damaged.

Очлуур залгуурын үзлэг

Inspect the spark plug for wear and proper gap. Replace if electrodes are worn or fouled. Refer to the specifications for the correct spark plug type and gap.

Гарын авлагын засвар үйлчилгээ

Regularly clean the guide bar groove and oil holes. Flip the guide bar periodically to ensure even wear.

6. Алдаа засах

This section addresses common issues you might encounter with your Stihl MS 201 TC-M chainsaw.

7. Техникийн үзүүлэлтүүд

Key technical specifications for the Stihl MS 201 TC-M chainsaw:

• Загварын дугаар: MS 201
• Эрчим хүчний эх үүсвэр: Бензин
• Таслах урт: 35 см
• Барааны жин: 3.85 кг (8.49 фунт)
• Бүтээгдэхүүний хэмжээ: 37 x 10 x 37 см (14.57 x 3.94 x 14.57 инч)
• Материал: Хуванцар (орон сууц)
• Үйлдвэрлэгч: STIHL
• GTIN (UPC): 00795711953546

8. Баталгаат хугацаа ба дэмжлэг

For warranty information, please refer to the warranty card included with your product or contact your authorized Stihl dealer. Keep your proof of purchase for warranty claims.

For technical support, spare parts, or service, please contact your local authorized Stihl service center. Only use genuine Stihl replacement parts and accessories.