Танилцуулга
This manual provides detailed instructions for the installation, proper use, and maintenance of your ALCO Heavy Duty Desk Length Wheelchair Arm Pads. These arm pads are designed for universal replacement on most manual wheelchairs, offering enhanced comfort and support. Please read these instructions carefully before installation and use.
Image 1: ALCO Heavy Duty Desk Length Wheelchair Arm Pads (Pair) with mounting hardware.
Тохиргоо ба суурилуулалт
The ALCO Heavy Duty Wheelchair Arm Pads are designed for straightforward installation. Ensure you have the correct tools, typically a screwdriver, before beginning.
- Бэлтгэл: Remove the existing arm pads from your wheelchair. Keep the old screws if they are in good condition and compatible, or use the new screws provided.
- Нүхний тохируулга: Position the new ALCO arm pad on the armrest frame. The arm pads feature two sets of pre-drilled holes to accommodate different wheelchair models. These hole spacings are approximately 5-1/2 inches (13.97 cm) or 3-5/16 inches (8.41 cm) center-to-center. Select the set of holes that aligns with your wheelchair's armrest frame.
- Аюулгүй хавсралт: Insert the screws through the aligned holes in the arm pad and into the armrest frame. Tighten the screws securely but do not overtighten, as this may damage the arm pad or the wheelchair frame.
- Repeat for Second Pad: Follow the same steps to install the second arm pad on the opposite side of the wheelchair.
- Эцсийн шалгалт: Gently test the stability of both arm pads to ensure they are firmly attached before using the wheelchair.
Зураг 2: Доод талд view of arm pad illustrating dual hole spacing options for universal fit.
Зөв хэрэглээ
Once installed, the ALCO arm pads provide a comfortable and supportive surface for the user's arms. Ensure that the user's arms are resting fully on the pads for optimal support and pressure distribution. These arm pads are designed for manual wheelchairs and are not suitable for power chairs.
Засвар үйлчилгээ, арчилгаа
- Цэвэрлэгээ: To clean the arm pads, wipe them with a damp cloth using mild soap and water. Avoid harsh chemical cleaners or abrasive materials, as these can damage the surface.
- Шалгалт: Regularly inspect the arm pads for any signs of wear, tears, or damage. Check the mounting screws periodically to ensure they remain tight.
- Хадгалах: If the arm pads are removed for storage, keep them in a clean, dry place away from direct sunlight and extreme temperatures.
Алдааг олж засварлах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Arm pads do not fit or align with holes. | Incorrect hole spacing selected or incompatible wheelchair model. | Ensure you are using the correct set of holes (5-1/2" or 3-5/16"). Verify your wheelchair model is compatible with universal arm pads. |
| Arm pads feel loose after installation. | Боолтыг хангалттай чангалаагүй байна. | Gently tighten all mounting screws. Do not overtighten. |
| Damage to arm pad surface. | Хүчтэй химийн бодис эсвэл зүлгүүрийн цэвэрлэгээнд өртөх. | Clean only with mild soap and water. Replace if damage affects functionality or comfort. |
Үзүүлэлтүүд
- Загварын дугаар: AL-66055BK-A3
- Брэнд: ALCO
- Төрөл: Heavy Duty Desk Length Wheelchair Arm Pads
- Өнгө: Хар
- Урт: 10-1/4 инч (26.04 см)
- Hole Spacing Options (Center-to-Center): 5-1/2 inches (13.97 cm) or 3-5/16 inches (8.41 cm)
- Бүтээгдэхүүний хэмжээ: 25.73 x 5.41 x 3.81 см (ойролцоогоор 10.13 x 2.13 x 1.5 инч)
- Жин: 260 g (approximately 0.57 lbs) per pair
- Тохиромжтой байдал: Universal fit for most manual wheelchairs (e.g., Medline, Drive, Invacare, E&J, Guardian, Lumex, Tuffcare). Not for power chairs.
Баталгаат хугацааны мэдээлэл
ALCO products are manufactured to high-quality standards. For specific warranty details regarding your ALCO Heavy Duty Wheelchair Arm Pads, please refer to the warranty documentation included with your purchase or contact the retailer or manufacturer directly. Keep your proof of purchase for any warranty claims.
Хэрэглэгчийн дэмжлэг
If you have any questions about the installation, use, or maintenance of your ALCO Heavy Duty Wheelchair Arm Pads, or if you encounter any issues not covered in this manual, please contact your retailer or the ALCO customer support team for assistance. Provide your product model number (AL-66055BK-A3) when seeking support.
For further information, you may visit the official ALCO website or contact the seller from whom you purchased the product.