1. Танилцуулга
This manual provides essential information for the safe and effective operation, setup, and maintenance of your Einhell Power X-Change 140Nm Cordless Impact Driver TE-CI 18/1 Li Solo. Please read these instructions carefully before using the tool and keep them for future reference. This product is designed for driving and removing screws and for light drilling tasks in wood and metal, utilizing its impact mechanism for high torque applications.
2. Аюулгүй ажиллагааны ерөнхий заавар
Always observe the following safety precautions when using power tools to prevent electric shock, fire, and serious injury.
- Ажлын талбайн аюулгүй байдал: Ажлын талбайг цэвэр, гэрэлтүүлэгтэй байлгах. Эмх замбараагүй эсвэл харанхуй газар осол аваар гарахыг өдөөдөг. Шатамхай шингэн, хий, тоос зэрэг тэсрэх аюултай орчинд цахилгаан хэрэгслийг бүү ажиллуул.
- Цахилгааны аюулгүй байдал: Хоолой, радиатор, тавиур, хөргөгч зэрэг газардуулсан эсвэл газардуулсан гадаргуутай бие махбодид хүрэхээс зайлсхий. Хэрэв таны бие газардуулгатай эсвэл газардуулсан бол цахилгаанд цохиулах эрсдэл нэмэгддэг.
- Хувийн аюулгүй байдал: Always wear eye protection. Use safety glasses, goggles, or a face shield. Wear hearing protection when operating the tool for extended periods. Dress properly; do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts.
- Хэрэгслийн хэрэглээ ба арчилгаа: Цахилгаан хэрэгслийг хүчээр бүү хий. Хэрэглээнд тохирох цахилгаан хэрэгслийг ашигла. Энэ нь төлөвлөсөн хэмжээгээрээ илүү сайн, аюулгүй ажиллах болно. Аливаа тохируулга хийх, дагалдах хэрэгслийг солих, цахилгаан хэрэгслийг хадгалахын өмнө батерейг цахилгаан хэрэгслээс салга.
- Батерейны хэрэглээ ба арчилгаа: Зөвхөн үйлдвэрлэгчээс заасан цэнэглэгчээр цэнэглээрэй. Нэг төрлийн батерейнд тохирох цэнэглэгч нь өөр зайтай ашиглах үед гал гарах эрсдэлийг үүсгэж болзошгүй. Цахилгаан хэрэгслийг зөвхөн тусгай зориулалтын батерейгаар ашигла.
3. Бүтээгдэхүүн дууссанview болон онцлог
The Einhell TE-CI 18/1 Li Solo is a cordless impact driver designed for efficient screwdriving tasks. It is part of the Power X-Change family, allowing for interchangeable battery use with other Einhell tools.
- Өндөр моментийн гаралт: Delivers up to 140 Nm of torque, suitable for driving large or long screws.
- Хувьсах хурдны хяналт: Electronic speed control allows for precise adjustment, ideal for delicate applications.
- 1/4" Hex Bit Mount: Features a 6.35 mm (1/4") hexagon fitting for quick and secure bit changes.
- Нэгдсэн LED гэрэлтүүлэг: Three power LEDs provide optimal illumination of the work area.
- Эргономик дизайн: Short, lightweight design with Softgrip surfaces ensures comfortable and tireless operation.
- Удаан эдэлгээтэй барилга: Features an aluminum housing and rubber supports for enhanced protection and ruggedness.
- Туузан хавчаар: A practical belt clip is included for convenient carrying and access during work.
Figure 1: The Einhell TE-CI 18/1 Li Solo Cordless Impact Driver, illustrating its compact design and the Power X-Change battery interface (battery sold separately).
4. Тохиргоо
4.1 Battery Installation (Battery and Charger Sold Separately)
- Ensure the battery is fully charged using an Einhell Power X-Change charger.
- Align the battery pack with the base of the impact driver.
- Slide the battery pack into the tool until it clicks securely into place. Ensure it is firmly seated before operation.
- Батерейг салгахын тулд батерейны хажуу талд байрлах суллах товчлуурыг дарж, түүнийг гулсуулна уу.
4.2 Bit Insertion and Removal
The impact driver uses a 1/4" (6.35 mm) hexagon fitting for impact-resistant bits.
- Pull the quick-change chuck sleeve forward.
- Insert the hexagon bit fully into the chuck.
- Release the sleeve. The bit should be securely locked in place. Pull on the bit to confirm it is properly seated.
- To remove the bit, pull the sleeve forward again and extract the bit.
Figure 2: Detail of the 1/4" hex bit mount and the three integrated LED lights, providing clear visibility of the work area.
5. Ашиглалтын заавар
5.1 Асаах/унтраах болон хурдны хяналт
- Эхлэх: Press the ON/OFF switch (trigger). The integrated LEDs will illuminate the work area.
- Хурдны тохируулга: The speed of the impact driver is controlled by the pressure applied to the ON/OFF switch. Pressing lightly results in lower speed, while pressing fully increases the speed up to 2300 RPM.
- Зогсох: ON/OFF унтраалгыг суллана уу.
5.2 Эргэлтийн чиглэл
The direction of rotation (forward/reverse) is controlled by the selector switch located above the trigger.
- Forward Rotation (Screwing In): Push the selector switch to the left.
- Reverse Rotation (Screwing Out): Push the selector switch to the right.
- Түгжих байрлал: When the selector switch is in the middle position, the ON/OFF switch is locked, preventing accidental activation. Always engage the lock when not in use or when changing bits.
5.3 Using the Impact Driver
- Select the appropriate impact-resistant bit for your screw type and material.
- Position the bit firmly on the screw head.
- Start the tool by gently pressing the trigger, increasing pressure as needed. The impact mechanism will engage automatically when resistance is met, providing additional torque.
- Maintain a firm grip on the tool. The low reverse torque design helps reduce strain on the user.
Figure 3: An individual demonstrating the use of the Einhell impact driver for driving a screw into a wooden surface, highlighting its practical application.
6. Засвар үйлчилгээ
Тогтмол засвар үйлчилгээ нь таны нөлөөллийн жолоочийн урт наслалт, оновчтой ажиллагааг баталгаажуулдаг.
- Цэвэрлэгээ: After each use, clean the tool housing with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure ventilation openings are free from dust and debris.
- Хадгалах: Store the impact driver and battery pack in a dry, secure location, away from direct sunlight and extreme temperatures. Ensure the battery is removed from the tool before storage.
- Шалгалт: Periodically check all screws and fasteners for tightness. Inspect the power tool for any signs of damage or wear. Do not use a damaged tool.
7. Алдаа засах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Хэрэгсэл эхлэхгүй байна. | Battery not charged or improperly inserted. Selector switch in lock position. | Charge battery. Ensure battery is fully inserted. Move selector switch to forward or reverse. |
| Эрчим хүч эсвэл гүйцэтгэл буурсан. | Low battery charge. Incorrect bit for application. Overheating. | Recharge battery. Use appropriate impact-rated bit. Allow tool to cool down. |
| Бит нь найдвартай барьдаггүй. | Chuck sleeve not fully released. Bit not fully inserted. | Ensure chuck sleeve snaps back into place. Push bit in completely. |
8. Техникийн үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Брэнд | Айнхелл |
| Загварын дугаар | TE-CI 18/1 Li Solo (4510034) |
| Эрчим хүчний эх үүсвэр | Battery Powered (18V Power X-Change) |
| Хамгийн их эргэлтийн хурд | 2300 эргэлт |
| Хамгийн их эргүүлэх момент | 140 Ньютон метр |
| Bit Mount | 1/4" (6.35 mm) Hexagon |
| Ботьtage | 18 вольт |
| Зүйлийн жин | 1.18 килограмм (2.58 фунт) |
| Бүтээгдэхүүний хэмжээс | 7.8"L x 3.03"W x 6.65"H |
| Материал | Rubber, Aluminium |
| Оруулсан бүрэлдэхүүн хэсгүүд | Akku-Schlagschrauber (Impact Driver Body Only) |
| Батерей багтсан уу? | Үгүй |
| Батерей шаардлагатай юу? | Yes (18V Lithium Ion) |
9. Баталгаат хугацаа ба дэмжлэг
Einhell Power Tools come with a standard 2-year warranty. An additional 1-year warranty is available upon product registration, extending the total warranty period to 3 years. For warranty claims, technical support, or spare parts, please contact Einhell customer service or visit the official Einhell webсайт.
The intelligent ABS Battery Electronics and high-performance Li-Ion cells in Power X-Change batteries ensure efficiency, reliability, and durability.
