allen + roth EFL06WBR

allen + roth Calday 60-in Brass Foot Switch Floor Lamp Даавуун сүүдрийн заавар гарын авлагатай

Model: EFL06WBR

Танилцуулга

This instruction manual provides detailed guidance for the safe assembly, operation, and maintenance of your allen + roth Calday 60-inch Brass Foot Switch Floor LampХэрэглэхийн өмнө бүх зааврыг анхааралтай уншиж, энэхүү гарын авлагыг ирээдүйд лавлах зорилгоор хадгална уу.

Аюулгүй байдлын мэдээлэл

Багцын агуулга

Carefully unpack all components and inspect for any damage. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

allen + roth Calday 60-inch Brass Floor Lamp Даавууны сүүдэртэй

Image: The allen + roth Calday 60-inch Brass Floor Lamp, featuring a brass-finished pole, a white spherical accent, and a white fabric drum shade. The lamp stands on a square brass base.

Тохируулах, угсрах заавар

Follow these steps to assemble your floor lamp:

  1. L хавсарганаamp Туйлаас суурь хүртэл: Carefully thread the lowest lamp pole section into the lamp base. Turn clockwise until securely tightened. Ensure the power cord is not twisted or pinched.
  2. Тулгуур хэсгүүдийг угсрах: Continue to thread the remaining lamp pole sections together, working upwards. Ensure each section is tightly secured to the next. The power cord should pass freely through the center of the pole.
  3. Булцууг суулгах: Insert an A19 LED bulb (or equivalent, max 60W incandescent) into the lamp залгуур. Хэт чангалж болохгүй.
  4. Attach Fabric Shade: Place the fabric shade over the lamp socket, resting it on the shade support. Secure the shade in place using the provided shade ring or finial, threading it onto the socket above the shade.
  5. Албан тушаал Лamp: Угсарсан l-ийг байрлуулamp on a flat, stable surface in your desired location. Ensure the power cord is not a tripping hazard.

Ашиглалтын заавар

Operating your allen + roth Calday Floor Lamp шууд байна:

  1. Эрчим хүчийг холбох: l-г залгаарайamp-ийн цахилгааны утсыг стандарт 120V хувьсах гүйдлийн залгуурт залгаарай.
  2. Асаах/унтраах: Locate the foot switch on the power cord. Gently press the foot switch to turn the lamp on. Press it again to turn the lamp унтраах.

Засвар үйлчилгээ

Алдааг олж засварлах

АсуудалБоломжит шалтгаанШийдэл
Lamp асахгүй байна.
  • Lamp залгаагүй.
  • Булцуу нь сул эсвэл шатсан байна.
  • Цахилгааны залгуур ажиллахгүй байна.
  • Foot switch is faulty.
  • Залгуурыг залгуурт бүрэн оруулсан эсэхийг шалгаарай.
  • Булцууг чангалах эсвэл солих.
  • Гаралтын төхөөрөмжийг өөр төхөөрөмжөөр туршиж үзээрэй.
  • Шилжүүлэгчийг буруу гэж сэжиглэж байгаа бол хэрэглэгчийн дэмжлэгтэй холбоо барина уу.
Гэрэл анивчдаг.
  • Булцуу сул байна.
  • Буруу чийдэнгийн төрөл.
  • Loose connection within the lamp.
  • Булцууг чангал.
  • Зөв чийдэнгийн төрөл, ватыг шалгана ууtage are used.
  • l-г салгаamp and check all pole connections for tightness.

Үзүүлэлтүүд

Баталгаат болон дэмжлэг

For warranty information or technical support, please refer to the documentation included with your purchase or contact the retailer where the product was acquired. You may also visit the official allen + roth webХарилцагчийн үйлчилгээний холбоо барих хаягийн сайт.