AUTOOL BT360

AUTOOL BT360 12V батерейны ачааллын шалгагчийн зааварчилгааны гарын авлага

Загвар: BT360

1. Танилцуулга

The AUTOOL BT360 is a 12V battery load tester designed to analyze the health status of automotive batteries. It performs battery tests, cranking tests, and charging system tests, providing accurate results for various battery types including regular flooded, AGM flat plate, AGM spiral, and Gel batteries. This manual provides detailed instructions for the proper use and maintenance of your BT360 tester.

2. Аюулгүй байдлын мэдээлэл

Always observe the following safety precautions when using the AUTOOL BT360 battery tester:

  • Wear appropriate eye protection and protective clothing when working near batteries.
  • Тээврийн хэрэгсэл агааржуулалт сайтай газар байгаа эсэхийг шалгаарай.
  • Avoid sparks, flames, and smoking near the battery, as batteries can produce explosive gases.
  • Халуун хөдөлгүүрийн эд анги эсвэл хөдөлж буй эд ангиудад хүрч болохгүй.
  • Keep the tester and cables away from water, oil, and grease.
  • Зай cl -ийг шалгаарайamps нь зөв терминалуудтай (улаанаас эерэг хүртэл, хараас сөрөг хүртэл) найдвартай холбогдсон байна.
  • If battery acid comes into contact with skin or eyes, flush immediately with plenty of water and seek medical attention.

3. Бүтээгдэхүүн дууссанview

3.1 Бүрэлдэхүүн хэсэг

The AUTOOL BT360 package typically includes:

  • AUTOOL BT360 Main Unit
  • Integrated Testing Cables with Alligator Clamps (Эерэгийг улаан, сөрөгийг хар)
  • Хэрэглэгчийн гарын авлага (энэ баримт бичиг)
AUTOOL BT360 Battery Tester box contents

Image 3.1: AUTOOL BT360 Battery Tester and its included accessories.

3.2 Tester Unit

AUTOOL BT360 Battery Tester front view

Зураг 3.2: Урд view of the AUTOOL BT360 Battery Tester, showing the display and control buttons.

The main unit features an LCD display and four control buttons:

  • ESC: Escape/Back button.
  • Чих хамар хоолой: Enter/Confirm button.
  • Дээш/Доош сум: Цэс сонгоход зориулсан навигацийн товчлуурууд.

3.3 Гол онцлогууд

  • Performs Battery Test, Cranking Test, and Charging Test.
  • Supports multiple battery types: Regular Flooded, AGM Flat Plate, AGM Spiral, and Gel.
  • Wide CCA testing range: 100-2400 CCA.
  • Multi-language support for user interface.
AUTOOL BT360 Multi-language support

Image 3.3: The AUTOOL BT360 supports multiple languages for its user interface.

4. Техникийн үзүүлэлтүүд

AUTOOL BT360 Battery Tester dimensions

Image 4.1: Physical dimensions of the AUTOOL BT360 Battery Tester.

ПараметрҮнэ цэнэ
ЗагварBT360
Системийн ботьtage12 вольт
Оролтын хэмжээtage Хамрах хүрээ9V ~ 15V байна
CCA хүрээ100-2400 CCA
Ашиглалтын температур-20 хэмээс 50 хэм хүртэл
Дэмждэг батерейны төрлүүдRegular Flooded, AGM Flat Plate, AGM Spiral, Gel
Хэмжээ (L x W x H)18.8 x 16.76 x 5.84 см
Жин320 гр
UPC602860607704

4.1 Supported Starting Power Supply Standards

AUTOOL BT360 Supported CCA standards table

Image 4.2: Table showing various starting power supply standards supported by the BT360.

СтандартХүрээ
CCA100-2400
JIS26A17-245H52
DIN100-2200
IEC100-2200
EN100-1400
SAE100-2400
GB30-220А
BCI100-2400
МСС100-2400
CA100-2400

5. Тохиргоо

5.1 Савлах

Carefully remove the AUTOOL BT360 tester and all accessories from the packaging. Inspect for any signs of damage. If any components are missing or damaged, contact customer support.

5.2 Тестерийг холбох

The BT360 is powered directly by the vehicle's 12V battery. Follow these steps to connect the tester:

  1. Тээврийн хэрэгслийн гал асаах, бүх хэрэгслүүд унтарсан эсэхийг шалгаарай.
  2. -г холбоно уу улаан эерэг (+) clamp 12V батерейны эерэг (+) терминал руу.
  3. -г холбоно уу хар сөрөг (-) clamp 12V батерейны сөрөг (-) терминал руу.
  4. Once connected, the tester will power on automatically.
AUTOOL BT360 Battery Tester with cables

Image 5.1: The AUTOOL BT360 tester with its integrated testing cables and clamps.

AUTOOL BT360 Battery Tester connected to a car battery

Image 5.2: The BT360 tester connected to a vehicle battery for testing.

6. Ашиглалтын заавар

After connecting the tester, the main menu will appear. Use the Up/Down arrow buttons to navigate through options and the ENT button to confirm selections. Use the ESC button to go back to the previous screen.

AUTOOL BT360 display screens showing test options and results

Image 6.1: Various display screens of the AUTOOL BT360, illustrating menu navigation and test result displays.

6.1 Батерейны туршилт

This function evaluates the overall health of the battery.

  1. Үндсэн цэсээс сонгоно уу Батерейны туршилт and press ENT.
  2. Сонго Батерейны байршил: Choose 'In-Vehicle' if the battery is installed in the car, or 'Out-of-Vehicle' if it's removed. Press ENT.
  3. Сонго Зайны төрөл: Choose the type that matches your battery (e.g., Regular Flooded, AGM Flat Plate, AGM Spiral, Gel). Press ENT.
  4. Сонго Туршилтын стандарт: Choose the standard specified on your battery (e.g., CCA, JIS, DIN). Press ENT.
  5. Тохируулах Зайны үнэлгээ: Input the CCA value (or equivalent rating) as indicated on your battery label. Use arrow buttons to adjust the value and ENT to confirm.
  6. The tester will perform the analysis and display results such as State of Health (SOH), State of Charge (SOC), voltage, internal resistance, and a recommendation (e.g., 'Good Battery', 'Charge', 'Replace').

6.2 Тахир дутуугийн туршилт

This test analyzes the vehicle's starting system, including the starter motor.

  1. Үндсэн цэсээс сонгоно уу Тоглолтын туршилт and press ENT.
  2. Follow the on-screen prompts to start the vehicle. The tester will monitor the battery voltage cranking үед.
  3. Once the test is complete, the display will show cranking voltage, cranking time, and a diagnosis of the starting system's performance.

6.3 Цэнэглэх туршилт

This test evaluates the vehicle's charging system, including the alternator and regulator.

  1. Үндсэн цэсээс сонгоно уу Цэнэглэх туршилт and press ENT.
  2. Follow the on-screen prompts to rev the engine to a specified RPM (e.g., 2500 RPM for 5 seconds).
  3. Тестер нь цэнэглэх хэмжээг хэмжинэtage under load and no-load conditions.
  4. The results will indicate the charging system's output, ripple voltage, and overall health (e.g., 'Good', 'Low Output', 'High Output').

7. Засвар үйлчилгээ

To ensure the longevity and accuracy of your AUTOOL BT360 tester:

  • Clean the tester with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Батерейг хол байлгаampцэвэрхэн, зэврэлтгүй.
  • Store the tester in a dry, cool place, away from direct sunlight and extreme temperatures.
  • Төхөөрөмжийг унагах эсвэл хүчтэй цохилтод оруулахаас зайлсхий.

8. Алдаа засах

If you encounter issues with your AUTOOL BT360, refer to the following common problems and solutions:

АсуудалБоломжит шалтгаанШийдэл
Тестер асахгүй байна.Loose connection; Battery voltage too low; Faulty cables.Cl эсэхийг шалгаарайamps are securely connected. Check battery voltage (must be above 9V). Inspect cables for damage.
Буруу уншилтууд.Incorrect battery type/standard/rating selected; Corroded battery terminals.Verify selected parameters match the battery. Clean battery terminals.
Алдааны мессежийг харуулав.Тодорхой алдааны нөхцөл байдал.Refer to the specific error code (if any) or re-run the test ensuring all steps are followed correctly.
Дэлгэц хоосон эсвэл царцсан байна.Software glitch; Power interruption.Disconnect and reconnect the tester to reset. If problem persists, contact support.

9. Баталгаат хугацаа ба дэмжлэг

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official AUTOOL webсайт. Худалдан авалтын баримтаа баталгаат нэхэмжлэлд зориулж худалдан авалтын баталгаа болгон хадгална уу.

Үйлдвэрлэгч: AUTOOL

Эхний боломжтой огноо: 27 оны аравдугаар сарын 2017

Холбогдох баримт бичиг - BT360

Урьдчилсанview AUTOOL BT360 батерейны систем шалгагч хэрэглэгчийн гарын авлага
Comprehensive user manual for the AUTOOL BT360 Battery System Tester, detailing its functions, technical parameters, operation, and maintenance. Learn how to test vehicle batteries, cranking systems, and charging systems accurately.
Урьдчилсанview AUTOOL BT360 батерейны систем шалгагч хэрэглэгчийн гарын авлага
This user manual provides comprehensive instructions for operating the AUTOOL BT360 Battery System Tester. It covers product introduction, features, parameters, structure, operating procedures for battery, cranking, and charging tests, settings, maintenance, warranty, and return/exchange services.
Урьдчилсанview AUTOOL BT-660 Battery Conductance Tester User Manual
User manual for the AUTOOL BT-660 Battery Conductance Tester, detailing its specifications, usage instructions for battery, cranking, and charging tests, data review, printing, and export functions. It helps diagnose vehicle starting and charging system faults.
Урьдчилсанview AUTOOL BT 760 Battery System Tester User Manual
Comprehensive user manual for the AUTOOL BT 760 Battery System Tester, detailing its features, functions, technical specifications, and operating procedures for automotive and motorcycle battery testing.
Урьдчилсанview AUTOOL BT960 Battery System Tester: User Manual and Operating Guide
Comprehensive user manual for the AUTOOL BT960 Battery System Tester, covering operation, features, safety, maintenance, and technical specifications for automotive battery testing.
Урьдчилсанview Автомат оношилгооны мультиметрийн хэрэглэгчийн гарын авлага
AUTOOL автомат оношилгооны мультиметрийн иж бүрэн хэрэглэгчийн гарын авлага нь түүний онцлог, ажиллагаа, автомашины туршилтын янз бүрийн функцуудыг багтаасан.tage, гүйдэл, эсэргүүцэл, осциллограф, машины хэлхээний туршилт, форсункийн туршилт, реле тест, дохионы шинжилгээ.