1. Танилцуулга
This manual provides detailed instructions for the installation, operation, and maintenance of your Emtek Privacy Set with Square Rosette and Helios Lever. Please read all instructions carefully before beginning installation to ensure proper function and to avoid damage to the product or door.
1.1 Аюулгүй байдлын мэдээлэл
- Always wear appropriate safety gear, such as safety glasses, during installation.
- Ensure the door is securely supported during installation to prevent injury.
- Жижиг хэсгүүдийг хүүхдээс хол байлга.
- Хэрэв та ямар нэгэн алхам хийхдээ эргэлзэж байвал мэргэшсэн мэргэжилтэнтэй зөвлөлд.
2. Багцын агуулга
Verify that all components are present before beginning installation. If any parts are missing or damaged, contact Emtek customer support.
- Helios Lever (Interior and Exterior)
- Square Rosettes (Interior and Exterior)
- Privacy Latch Mechanism
- Ажил хаялтын хавтан
- Суурилуулах эрэг
- Спинд
- Emergency Release Pin
- Суурилуулалтын техник хангамж
Image 1: Emtek Privacy Set, Square Rosette, Helios Lever in Flat Black finish. This image displays the complete lever assembly, including the square rosette and the lever handle, which is designed for right-hand doors.
3. Шаардлагатай хэрэгслүүд
Суурилуулалтын хувьд дараах хэрэгслүүд ихэвчлэн шаардлагатай байдаг:
- Филлипсийн толгой халив
- Соронзон хальсны хэмжүүр
- Харандаа
- Drill (if new door preparation is required)
- Wood Chisel (if new door preparation is required)
4. Хаалганы бэлтгэл
Ensure your door is properly prepared for the Emtek Privacy Set. This lever is designed for doors between 1-3/8 inches to 2-1/4 inches thick with a standard 2-1/8 inch bore hole.
4.1 Backset Measurement
The standard latch is for a 2-3/8 inch backset (distance from the edge of the door to the center of the bore hole). If your door requires a 2-3/4 inch backset, ensure you have the correct latch mechanism.
- Measure the distance from the edge of the door to the center of the existing bore hole.
- If installing on a new door, mark the center of the bore hole at the desired backset (2-3/8" or 2-3/4") and drill a 2-1/8" hole.
5. Суурилуулах заавар
Амжилттай суулгахын тулд дараах алхмуудыг дагана уу:
- Түгжээг суулгах: Insert the privacy latch mechanism into the bore hole on the edge of the door. Ensure the bevel of the latch bolt faces the direction the door closes. Secure with screws.
- Strike Plate суулгах: Position the strike plate on the door frame, aligning it with the latch bolt. Mark and chisel out the necessary recess for a flush fit. Secure with screws.
- Install Exterior Rosette and Lever: Place the exterior rosette and lever assembly onto the door, ensuring the spindle passes through the latch mechanism. The lever is handed (Right Hand), so ensure it is oriented correctly.
- Install Interior Rosette and Lever: Place the interior rosette and lever assembly onto the door, aligning it with the exterior components. Ensure the spindle engages properly.
- Secure Assemblies: Use the provided mounting screws to secure the interior and exterior assemblies together. Tighten screws evenly until snug, but do not overtighten.
- Туршилтын ажиллагаа: Test the lever action and the privacy locking mechanism to ensure smooth operation.
6. Ашиглалтын заавар
The Emtek Privacy Set is designed for interior doors where a locking function is desired from the inside, such as bedrooms or bathrooms. It does not feature an exterior key lock.
6.1 Хаалгыг түгжих
From the interior side of the door, locate the privacy button or turn-piece on the rosette. Engage this mechanism to lock the door. The exterior lever will then be disengaged, preventing entry.
6.2 Хаалганы түгжээг тайлах
From the interior, disengage the privacy button or turn-piece to unlock the door. From the exterior, an emergency release pin (typically a small hole) is provided on the rosette. Insert the emergency release pin into this hole and push to unlock the door in case of an emergency or accidental lockout.
7. Арчилгаа, засвар үйлчилгээ
Proper care will help maintain the finish and functionality of your Emtek door hardware.
- Цэвэрлэгээ: Clean the hardware with a soft, damp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the Flat Black finish.
- Тосолгоо: Periodically apply a small amount of silicone-based lubricant to the latch bolt and internal mechanisms to ensure smooth operation. Do not use oil-based lubricants, which can attract dust.
- Шалгалт: Бүх боолт болон холболтууд чанга байгаа эсэхийг тогтмол шалгаж байгаарай. Шаардлагатай бол дахин чангална уу.
8. Алдаа засах
If you encounter issues with your Emtek Privacy Set, refer to the following common problems and solutions:
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Хөшүүрэг сул эсвэл ганхсан байна. | Суурилуулах эрэг сул байна. | Tighten the mounting screws evenly. Do not overtighten. |
| Түгжээ нь жигд буцаагдахгүй. | Latch mechanism is dry or misaligned. | Apply silicone lubricant to the latch bolt. Check for proper alignment of the latch in the bore hole. |
| Door does not latch or close properly. | Strike plate is misaligned or not recessed enough. | Adjust the strike plate position or deepen the recess as needed. |
| Privacy lock does not engage/disengage. | Internal mechanism issue or spindle misalignment. | Ensure the spindle is correctly engaged with both lever assemblies. If the issue persists, contact customer support. |
9. Техникийн үзүүлэлтүүд
- Брэнд: Эмтек
- Загварын дугаар: 5110HLO, 5210HLO
- Бүтээгдэхүүний төрөл: Privacy Door Lever Set
- Дизайн: Square Rosette, Helios Lever
- Гарын чиг баримжаа: Баруун гар
- Дуусгах: Хавтгай хар
- Материал: Гуулин
- Хаалганы зузаантай нийцтэй байдал: 1-3/8" to 2-1/4"
- Standard Door Prep: 2-1/8" bore hole
- Нуруу: Standard 2-3/8" (2-3/4" available)
- Бүтээгдэхүүний хэмжээ: Ойролцоогоор 9"Урт x 7"Өргөн
- Проекцийн зай: 2.38 инч
- Барааны жин: 2.88 фунт
- Оруулсан бүрэлдэхүүн хэсгүүд: Суурилуулалтын техник хангамж
10. Баталгаат хугацаа ба дэмжлэг
Emtek products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Emtek website. If you require technical assistance or have questions regarding your product, please contact Emtek customer support directly.
For more information, visit the official Emtek webсайт: www.emtek.com
