1. Танилцуулга
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your ASTRALPOOL Aster 99 Sand Filter with Valve Ø 600. Please read these instructions thoroughly before attempting to install or operate the filter. Retain this manual for future reference.
1.1. Аюулгүй байдлын мэдээлэл
- Засвар үйлчилгээ хийхээсээ өмнө насосны цахилгааныг үргэлж салгаж байгаарай.
- Нэвчилтээс урьдчилан сэргийлэхийн тулд бүх холболтууд найдвартай, ус нэвтэрдэггүй эсэхийг шалгаарай.
- Хэрэв шүүлтүүрийн аль нэг хэсэг нь гэмтсэн эсвэл байхгүй бол түүнийг ажиллуулж болохгүй.
- Keep children away from the filtration system during operation and maintenance.
- Хэрэв та ямар нэгэн алхам хийх талаар эргэлзэж байвал суурилуулахын тулд мэргэшсэн мэргэжилтэнтэй зөвлөлдөнө үү.
2. Бүтээгдэхүүн дууссанview болон бүрэлдэхүүн хэсгүүд
The ASTRALPOOL Aster 99 Sand Filter is designed for efficient swimming pool water filtration. It consists of a durable filter tank and a multi-port valve that controls the water flow through the system.
Зураг 1: ASTRALPOOL Aster 99 Sand Filter and Multi-port Valve. The image displays the main filter tank, which is a large, white, spherical unit, alongside a separate black multi-port valve with a handle, used for directing water flow.
2.1. Үндсэн бүрэлдэхүүн хэсгүүд:
- Шүүлтүүрийн сав: The main body where the filter media (sand) is contained.
- Multi-port Valve: Controls the operational modes of the filter (e.g., filter, backwash, rinse).
- Даралт хэмжигч: Indicates the internal pressure of the filter, crucial for determining when backwashing is needed.
- Ус зайлуулах залгуур: Located at the bottom of the tank for draining water.
3. Техникийн үзүүлэлтүүд
Understanding the dimensions and characteristics of your filter is important for proper installation and maintenance.
Зураг 2: Dimensional diagram of the ASTRALPOOL Aster Sand Filter. This diagram illustrates the filter's height (H), diameter (D), and the positions of the inlet/outlet ports (M, N, K) with a corresponding table showing values for different filter sizes (Ø 500, 600, 750).
3.1. General Specifications for Ø 600 Model:
- Диаметр (D): 600 мм
- Өндөр (H): 900 мм
- Port M (Height from base): 455 мм
- Port N (Height from base): 330 мм
- Port K (Connection Size): 1 1/2"
3.2. Additional Product Information:
- ASIN: B079L868QJ
- Эхний боломжтой огноо: 29 оны дөрөвдүгээр сарын 2025
- Сэлбэг хэрэгслийн бэлэн байдал: Мэдээлэл байхгүй байна.
4. Тохиргоо ба суурилуулалт
Proper installation is crucial for the filter's performance and longevity. Follow these steps carefully.
4.1. Сайтын сонголт
- Place the filter on a firm, level surface, preferably concrete, to prevent settling.
- Ensure adequate ventilation and protection from direct sunlight and freezing temperatures.
- Allow sufficient space around the filter for maintenance and service.
4.2. Filling with Filter Media (Sand)
- Ensure the internal standpipe and laterals are properly assembled and secured.
- Элс орохоос сэргийлж, босоо хоолойн нүхийг гялгар уут эсвэл таглаагаар таглана.
- Carefully pour the recommended amount and grade of filter sand into the tank.
- Remove the plastic bag/cover and ensure no sand has entered the standpipe.
4.3. Multi-port Valve Installation
- Carefully place the multi-port valve onto the filter tank, aligning the standpipe with the valve's opening.
- Secure the valve to the tank using the provided clamp or bolts, ensuring a tight seal.
- Connect the plumbing from the pump to the "PUMP" port on the valve.
- Connect the plumbing to the pool return lines to the "RETURN" port on the valve.
- Connect a waste line to the "WASTE" port on the valve, directing water to an appropriate drainage area.
- Даралт хэмжигчийг хавхлагын зориулалтын порт руу суурилуулна.
5. Ашиглалтын заавар
The multi-port valve controls the filter's functions. Always turn off the pump before changing the valve position to prevent damage.
5.1. Multi-port Valve Positions
- ШҮҮЛГҮҮР: Normal filtering mode. Water flows through the sand, is cleaned, and returned to the pool.
- БУЦАХ: Cleans the filter sand. Water flows in reverse, flushing trapped debris out the waste line.
- УГАХ: Used after backwashing to settle the sand and flush any remaining dirty water to waste before returning to FILTER mode.
- WASTE/DRAIN: Bypasses the filter, sending water directly from the pool to the waste line. Useful for vacuuming heavy debris or lowering pool water level.
- ДАХИН ЦУГЛАХ: Шүүлтүүрийг тойрч гарч, усыг шууд усан сан руу буцаана. Шүүлтүүргүйгээр химийн бодис түгээхэд ашигтай.
- ХААЛТ: Shuts off all flow to the filter. Use for servicing the pump or filter.
5.2. Initial Startup (First Backwash)
- Ensure the pool is filled to the proper level and all plumbing connections are secure.
- Set the multi-port valve to БУЦАХ.
- Turn on the pump. Backwash for 2-3 minutes, or until the water in the sight glass (if present) runs clear.
- Шахуургыг унтраа.
- Set the multi-port valve to УГААЛГА.
- Turn on the pump. Rinse for 30-60 seconds.
- Шахуургыг унтраа.
- Set the multi-port valve to ШҮҮГЧ.
- Turn on the pump. Note the initial pressure gauge reading; this is your clean filter pressure.
6. Засвар үйлчилгээ
Regular maintenance ensures optimal performance and extends the life of your filter.
6.1. Backwashing
Backwash the filter when the pressure gauge reading is 8-10 PSI (0.5-0.7 bar) above the clean filter pressure, or when pool water clarity decreases. Follow the steps outlined in "5.2. Initial Startup (First Backwash)" for each backwash cycle.
6.2. Өвлийн бэлтгэл (хэрэв байгаа бол)
- Насосыг унтрааж, цахилгааныг салга.
- Set the multi-port valve to ӨВЛҮҮЛЭХ (if available) or an intermediate position between two settings to relieve pressure on the gasket.
- Remove the drain plug at the bottom of the filter tank to completely drain all water.
- Disconnect all plumbing lines and store them in a dry, frost-free area.
- Remove the pressure gauge and store it indoors.
- Cover the filter to protect it from elements.
7. Алдаа засах
This section addresses common issues you might encounter with your sand filter.
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Low water flow / High pressure | Clogged filter sand; pump strainer basket full; closed valve. | Backwash the filter; clean pump strainer basket; check valve position. |
| Үүлэрхэг усан сангийн ус | Insufficient filtration time; dirty filter sand; improper chemical balance; damaged laterals. | Increase filtration time; backwash/rinse filter; test and adjust pool chemistry; inspect laterals for damage. |
| Water leaking from valve | Worn spider gasket; loose connections. | Replace spider gasket; tighten connections. |
| Элс усан сан руу буцаж байна | Damaged laterals; too much sand; improper sand grade. | Inspect and replace damaged laterals; ensure correct sand level and grade. |
8. Баталгаат хугацаа ба дэмжлэг
Specific warranty details for the ASTRALPOOL Aster 99 Sand Filter with Valve Ø 600 are not provided within this manual. For warranty claims, technical support, or to inquire about spare parts, please contact your authorized ASTRALPOOL dealer or the manufacturer directly. Please have your product model and purchase date available when contacting support.
The ASIN for this product is B079L868QJ.