Steinbach Active Balls+ Filter System Instruction Manual

Танилцуулга

This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your Steinbach Active Balls+ Filter System, model 040386. This non-self-priming pump is designed to maintain crystal-clear water in pools up to approximately 19,000 liters. Please read this manual thoroughly before initial use to ensure proper function and longevity of your filter system.

Аюулгүй ажиллагааны зааварчилгаа

Осол гэмтэл, гэмтлээс урьдчилан сэргийлэхийн тулд дараах аюулгүй байдлын арга хэмжээг үргэлж дагаж мөрдөөрэй.

• Цахилгаан хангамж нь бүтээгдэхүүний шошгон дээрх үзүүлэлттэй тохирч байгаа эсэхийг шалгаарай.
• Засвар, цэвэрлэгээ хийхээс өмнө цахилгаан тэжээлийг салга.
• Цахилгааны утас эсвэл залгуур гэмтсэн бол насосыг ажиллуулж болохгүй.
• Keep children and unauthorized persons away from the filter system during operation.
• Install the filter system on a stable, level surface, protected from direct sunlight and rain.
• Do not run the pump dry. Ensure it is always filled with water during operation.
• Maximum water temperature for operation is 35°C (95°F).
• Suitable for saltwater up to a salt content of 5 g/l.

Бүтээгдэхүүн дууссанview болон бүрэлдэхүүн хэсгүүд

The Steinbach Active Balls+ Filter System consists of several key components designed for optimal pool water filtration.

Зураг 1: Илүүview of the Steinbach Active Balls+ Filter System components, showing the filter tank, pump unit, and various connection parts.

Зураг 2: Нарийвчилсан view of the 7-way valve, indicating various operational modes such as Filter, Rinse, Waste, Recirculate, Closed, and Backwash.

Figure 3: Product label displaying technical specifications of the pump, including model number, power, voltage, and maximum temperature.

Figure 4: The filter system alongside a visual representation of the filter balls, which are the primary filtration medium.

Figure 5: Dimensional diagram illustrating the approximate height of the filter tank, which is 55 cm (22 inches).

Тохиргоо

Follow these steps for initial setup of your filter system:

1. Бүрэлдэхүүн хэсгүүдийг задлах: Carefully remove all parts from the packaging. Verify all components are present according to the packing list.
2. Position the System: Place the filter system on a firm, level surface near your pool, ensuring it is protected from direct weather exposure.
3. Install Filter Balls: Open the filter tank and carefully pour the approximately 300g of filter balls into the tank. Ensure the central pipe is correctly positioned before closing the tank.
4. Connect Pump to Filter Tank: Attach the pump unit to the filter tank using the provided connections. Ensure all seals are properly seated and connections are tightened to prevent leaks. It is recommended to use PTFE tape on threaded connections for a secure seal.
5. Connect to Pool: Connect the pool hoses to the filter system's inlet and outlet ports. The inlet hose typically connects from the pool skimmer/main drain to the pump's suction side, and the outlet hose connects from the filter's return side back to the pool.
6. Усаар дүүргэх: Before starting the pump, ensure the pool is filled with water and the filter system is primed by allowing water to flow into the pump and filter tank.
7. Цахилгааны холболт: Connect the power plug to a grounded electrical outlet. Ensure the outlet is protected by a Residual Current Device (RCD) for safety.

Operating the 7-Way Valve

The 7-way valve controls the flow of water through the filter system. Always turn off the pump before changing the valve position.

• ШҮҮЛГҮҮР: This is the standard operating position for daily filtration. Water flows from the pool, through the filter balls, and back to the pool.
• БУЦАХ: Used for cleaning the filter balls. Water flows in reverse through the filter, dislodging trapped debris, and is then directed to waste. Perform backwash when the pressure gauge indicates higher than normal pressure or when water flow decreases.
• УГАХ: Used after backwashing to flush out any remaining debris from the filter and settle the filter balls. Water flows through the filter and is directed to waste.
• ХОГ: Bypasses the filter and sends water directly from the pool to waste. Useful for vacuuming heavy debris directly to waste or lowering the pool water level.
• ДАХИН ЦУГЛАХ: Circulates water through the pump and back to the pool without passing through the filter. Useful for distributing chemicals quickly.
• ХААЛТ: Shuts off all flow to the filter and pump. Use this position only when the pump is off and for maintenance or when the pool is not in use.
• ӨВЛИЙН: (If applicable) Position for draining the system for winter storage. Consult specific winterization instructions.

Засвар үйлчилгээ

Тогтмол засвар үйлчилгээ нь оновчтой ажиллагааг хангаж, шүүлтүүрийн системийн ашиглалтын хугацааг уртасгадаг.

• Арын угаалт: Perform backwashing regularly, typically once a week or when the pressure gauge reading increases by 0.2-0.3 bar (3-5 psi) above its clean operating pressure.
  1. Шахуургыг унтраа.
  2. 7 чиглэлтэй хавхлагыг "BACKWASH" ​​горимд тохируулна уу.
  3. Turn on the pump and run until the water in the sight glass (if present) runs clear (approx. 2-3 minutes).
  4. Шахуургыг унтраа.
  5. 7 чиглэлийн хавхлагыг "RINSE" горимд тохируулна уу.
  6. Насосыг асаагаад 30-60 секундын турш ажиллуулна уу.
  7. Шахуургыг унтраа.
  8. 7 чиглэлтэй хавхлагыг "ШҮҮРГҮҮР" байрлалд буцааж тохируулна уу.
  9. Хэвийн шүүлтүүрийг үргэлжлүүлэхийн тулд насосыг асаана уу.
• Cleaning Filter Balls: The filter balls can be cleaned manually or in a washing machine (in a laundry bag) at 30°C (86°F) without fabric softener. Replace filter balls when they show signs of significant wear or reduced filtration efficiency.
• Насосны сагс цэвэрлэх: Periodically check and clean the pump's pre-filter basket (if applicable) to remove large debris that could obstruct flow.
• Өвөлжилт: Before freezing temperatures, drain all water from the pump, filter tank, and hoses. Store the pump and valve in a dry, frost-free location.

Алдааг олж засварлах

Нийтлэг асуудлууд болон тэдгээрийн шийдлүүдийг энэ хэсгээс харна уу.

Үзүүлэлтүүд

Баталгаат болон дэмжлэг

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Steinbach customer service. Keep your proof of purchase for warranty claims.