Shinko R525 Cheater Rear Tire (110/90-19 62M)

Shinko R525 Cheater Rear Tire хэрэглэгчийн гарын авлага

Model: Shinko R525 Cheater Rear Tire (110/90-19 62M)

Брэнд: Шинко

1. Бүтээгдэхүүн дууссанview

The Shinko R525 Cheater Rear Tire is a specialized off-road motorcycle tire designed for extreme single track and hard enduro conditions. It combines the soft, sticky rubber compound found in trials tires with a knobby tread pattern, offering superior traction across a wider range of soil conditions compared to traditional trials tires. This hybrid design aims to improve braking performance and traction in loose soil, making it an ideal choice for challenging off-road environments.

The R525 model excels in looser, loamier soil conditions, providing enhanced confidence for riders navigating demanding terrain.

Shinko R525 Cheater Rear Tire, side view

Зураг 1.1: Хажуу тал view of the Shinko R525 Cheater Rear Tire, showcasing its aggressive knobby tread pattern.

2. Суурилуулалт ба тохиргоо

Proper installation of the Shinko R525 Cheater Rear Tire is critical for safety and performance. It is highly recommended that tire installation be performed by a qualified professional using appropriate tools and safety procedures.

2.1 Аюулгүй байдлын урьдчилан сэргийлэх арга хэмжээ

2.2 Mounting Instructions (General Guidelines)

  1. Remove Old Tire: Deflate the old tire, break the beads, and carefully remove it from the rim.
  2. Inspect Rim: Thoroughly inspect the rim for any damage, cracks, or sharp edges. Clean the rim thoroughly.
  3. Тослох: Apply a generous amount of tire mounting lubricant to both beads of the new Shinko R525 tire and the rim flanges.
  4. Position Tire: Place one bead of the tire over the rim. For the second bead, use tire irons carefully, taking small bites to avoid pinching the inner tube (if applicable) or damaging the tire bead or rim.
  5. Дотоод хоолойг суурилуулах (хэрэв байгаа бол): If using an inner tube, slightly inflate it before inserting it into the tire to prevent pinching.
  6. Дугуйг шахах: Slowly inflate the tire, ensuring both beads seat properly on the rim. Listen for two distinct "pops" as the beads seat. Do not exceed the maximum seating pressure indicated on the tire sidewall.
  7. Check Bead Seating: Visually inspect the tire around the entire circumference on both sides to ensure the beads are evenly seated. There should be a uniform line visible just above the rim flange.
  8. Даралтыг тохируулах: Once seated, adjust the tire pressure to the recommended operating pressure for your specific riding conditions and motorcycle.
Close-up of Shinko R525 Cheater Rear Tire tread

Зураг 2.1: Ойрын зураг view of the Shinko R525 Cheater Rear Tire's aggressive tread blocks, designed for maximum grip.

3. Operating Conditions and Performance

The Shinko R525 Cheater Rear Tire is engineered for optimal performance in specific off-road conditions. Understanding its design intent will help maximize its benefits.

3.1 Зориулалт

3.2 Гүйцэтгэлийн шинж чанар

Дээрээс доош view of Shinko R525 Cheater Rear Tire tread pattern

Зураг 3.1: Дээрээс доош view highlighting the unique tread pattern of the Shinko R525 Cheater Rear Tire, optimized for off-road grip.

4. Засвар үйлчилгээ

Regular maintenance extends the life of your Shinko R525 Cheater Rear Tire and ensures consistent performance.

4.1 Дугуйн даралт

4.2 Хяналт шалгалт

4.3 Цэвэрлэгээ ба хадгалах

Дээрээс доош бүрэн view of Shinko R525 Cheater Rear Tire

Figure 4.1: Full top-down view of the Shinko R525 Cheater Rear Tire, showing the complete tread pattern from bead to bead.

5. Алдаа засах

This section addresses common issues you might encounter with your Shinko R525 Cheater Rear Tire.

АсуудалБоломжит шалтгаанШийдэл
Loss of Traction / Poor GripIncorrect tire pressure (too high or too low), worn tread, unsuitable terrain for tire type, suspension issues.Adjust tire pressure to recommended levels for terrain. Inspect tread wear. Ensure tire is suitable for conditions. Check motorcycle suspension.
Жигд бус хээний элэгдэлImproper tire pressure, unbalanced wheel, worn suspension components, aggressive riding style.Maintain correct tire pressure. Have wheel balanced. Inspect and service suspension. Adjust riding style.
Байнга хатгалт хийхLow tire pressure, sharp objects in riding area, old or damaged inner tube (if applicable), rim strip issues.Maintain proper tire pressure. Avoid riding over sharp debris. Replace inner tube if damaged. Inspect and replace rim strip. Consider heavy-duty tubes or tubeless conversion if applicable.
Tire Wobble / VibrationImproperly seated bead, unbalanced wheel, damaged tire, bent rim.Re-seat tire bead. Have wheel balanced. Inspect tire for damage. Check rim for trueness. Seek professional assistance if issue persists.

6. Техникийн үзүүлэлтүүд

Key technical specifications for the Shinko R525 Cheater Rear Tire (110/90-19 62M):

АтрибутҮнэ цэнэ
БрэндШинко
ЗагварR525 Cheater Rear Tire
Дугуйн хэмжээ110/90-19
Ачааллын зэрэглэл62 (Equivalent to 584 lbs / 265 kg)
Хурдан үнэлгээM (Up to 81 mph / 130 km/h)
Обудын хэмжээ19 инч
Дугуйны төрөлOff-road, Hybrid Hard Enduro / Extreme Single Track
ӨргөдөлАрын
UPC644978374246
Үйлдвэрлэгчийн хэсгийн дугаар87-4328S

7. Баталгаат хугацааны мэдээлэл

Shinko Tires typically come with a limited warranty covering manufacturing defects. Specific warranty terms and conditions may vary by region and product. For detailed warranty information, please refer to the official Shinko Tires website or contact your authorized Shinko dealer. Keep your proof of purchase for any warranty claims.

8. Хэрэглэгчийн дэмжлэг

For technical assistance, product inquiries, or support regarding your Shinko R525 Cheater Rear Tire, please contact Shinko Tires customer service or your local authorized dealer. You can usually find contact information on the official Shinko Tires webсайт.

When contacting support, please have your tire's model number (R525 Cheater Rear Tire), size (110/90-19), and any relevant purchase information ready.

Холбогдох баримт бичиг - R525 Cheater Rear Tire (110/90-19 62M)

Урьдчилсанview Shinko HR-706 Hybrid Recorder (Цэгээр хэвлэх) зааварчилгаа
Энэхүү иж бүрэн заавар гарын авлага нь Shinko HR-706 Hybrid Recorder-ийн нарийвчилсан зааварчилгааг агуулдаг. Энэ нь аюулгүй ажиллагаа, суурилуулалт, утас, төхөөрөмжийн тохиргоо, холбооны протокол, засвар үйлчилгээний журам, нийтлэг асуудлуудыг олж засварлах, багажийн оновчтой гүйцэтгэл, удаан эдэлгээтэй байх техникийн үзүүлэлтүүдийн талаархи чухал мэдээллийг багтаасан болно.
Урьдчилсанview Shinko HR-700シリーズ ハイブリッド記録計:コンパクト、高視認性産業用デーズ
Шинко HR-700シリーズハイブリッド記録計の仕様、特徴、寸法。コンパクト設褈LE表示、IP65準拠、産業オートメーション向けの多様な入力オプションを特長としています。
Урьдчилсанview Shinko SIF-600 PLC интерфейсийн нэгж: Зааварчилгааны гарын авлага
Энэхүү иж бүрэн зааварчилгааны гарын авлага нь Shinko SIF-600 PLC Интерфейсийн нэгжийн талаар дэлгэрэнгүй тайлбарласан бөгөөд үйлдвэрлэлийн автоматжуулалтын програмуудыг суурилуулах, тохируулах, ажиллуулах, алдааг олж засварлах талаар тусгасан болно. Аюулгүй, үр дүнтэй ашиглахад зайлшгүй шаардлагатай.
Урьдчилсанview Shinko ACS2 Дижитал заагч хянагчийн зааварчилгааны гарын авлага
Аж үйлдвэрийн температурын хяналтын хэрэглээнд суурилуулах, утас холбох, ажиллуулах, тохиргоо хийх, алдааг олж засварлах талаарх Shinko ACS2 дижитал заагч хянагчийн дэлгэрэнгүй зааварчилгааны гарын авлага.
Урьдчилсанview Shinko QMC1 Харилцаа холбооны өргөтгөлийн модулийн зааварчилгаа
This instruction manual provides comprehensive details on the Shinko QMC1 Communication Expansion Module, covering its installation, wiring, operation, communication protocols, and specifications for industrial control systems. Learn about its features, setup, and integration with host computers and PLCs.
Урьдчилсанview WIL-101-TU デジタル指示濁度/SS 計 取扱説明書
SHINKO WIL-101-TU デジタル指示濁度/SS計の取扱説明書。本製品の設置、機能、操作、配線、仕様、校正、通信、およびトラブルシューティングに関する詳細情報を提供します。