HILTI VC 150-6 X

HILTI VC 150-6 X Vacuum Cleaner User Manual

Model: VC 150-6 X (Item Number: 2167146)

1. Аюулгүй байдлын мэдээлэл

Read all safety warnings and instructions before operating this vacuum cleaner. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

Ерөнхий аюулгүй байдал

2. Бүтээгдэхүүн дууссанview

The HILTI VC 150-6 X is a robust corded electric vacuum cleaner designed for various cleaning tasks on surfaces such as carpet, hard floor, rugs, and bare floors. It features a 6-gallon capacity and is equipped with a push-button controller and touch control for ease of use.

HILTI VC 150-6 X Vacuum Cleaner main unit with hose and attachments

Image 1: HILTI VC 150-6 X Vacuum Cleaner. This image displays the main vacuum unit, including its wheels, dust container, and the attached hose with a nozzle.

Гол онцлогууд:

3. Тохиргоо

Follow these steps to prepare your HILTI VC 150-6 X for first use.

Савлаж байна

  1. Сав баглаа боодолоос бүх бүрэлдэхүүн хэсгүүдийг болгоомжтой арилгана.
  2. Check for any damage during transit. If any damage is found, contact your HILTI service representative.
  3. Ensure all listed components are present: main unit, hose, extension wands, floor nozzle, crevice tool, and filters.

Ассемблей

  1. Дугуйг хавсаргах: If not pre-assembled, securely attach the four wheels to the base of the vacuum cleaner.
  2. Шүүлтүүрийг суулгах: Open the vacuum cleaner's lid/housing. Insert the appropriate filter (e.g., HEPA filter, foam filter) into its designated slot. Ensure it is seated correctly to prevent dust leakage.
  3. Хоолойг холбох: Securely attach the flexible hose to the suction inlet on the main unit. Ensure a tight connection.
  4. Дагалдах хэрэгслийг хавсаргах: Connect the desired extension wands and floor nozzle or other attachments to the end of the hose.

Эрчим хүчний холболт

Connect the power cord to a suitable electrical outlet (120V). Ensure the outlet is properly grounded.

4. Ашиглалтын заавар

This section details how to operate your HILTI VC 150-6 X Vacuum Cleaner effectively.

Тоос сорогчийг эхлүүлэх

  1. Ensure the vacuum cleaner is properly assembled and connected to a power source.
  2. Press the power button on the control panel. The vacuum cleaner will start.
  3. Use the touch control interface to adjust suction power or switch between modes if available.

Тоос соруулах зөвлөмж

Stopping the Vacuum Cleaner

Press the power button again to turn off the vacuum cleaner. Disconnect the power cord from the outlet after use.

5. Засвар үйлчилгээ

Regular maintenance ensures the longevity and optimal performance of your HILTI VC 150-6 X.

Тоосны савыг хоослох

  1. Тоос сорогчийг унтрааж, залгуураас салгасан эсэхийг шалгаарай.
  2. Release the latches securing the motor head to the dust container.
  3. Carefully lift the motor head off.
  4. Empty the contents of the dust container into a waste receptacle.
  5. Wipe the inside of the container with a damp шаардлагатай бол даавуу.
  6. Reassemble the unit, ensuring the latches are securely fastened.

Шүүлтүүрийг цэвэрлэх, солих

The VC 150-6 X uses various filter types including Cartridge, Disk, Foam, and HEPA filters. Refer to your specific filter type for cleaning instructions.

Ерөнхий цэвэрлэгээ

Тоос сорогчийн гадна талыг зөөлөн арчиж, damp даавуу. Зүлгүүрийн цэвэрлэгч, уусгагчийг бүү ашигла.

6. Алдаа засах

This section provides solutions to common issues you might encounter with your HILTI VC 150-6 X.

АсуудалБоломжит шалтгаанШийдэл
Тоос сорогч асахгүй байна.Цахилгаан хангамж байхгүй.
Цахилгааны утас гэмтсэн.
Цахилгааны утсыг ажлын залгуурт найдвартай залгасан эсэхийг шалгана уу.
Inspect the power cord for damage. If damaged, contact HILTI service.
Бага сорох чадал.Тоосны сав дүүрсэн.
Шүүлтүүр бөглөрсөн.
Хоолой эсвэл цорго бөглөрсөн байна.
Тоосны савыг хоослох.
Шүүлтүүрийг цэвэрлэх буюу солих.
Check the hose and attachments for blockages and remove them.
Ашиглалтын явцад ер бусын дуу чимээ.Хоолой эсвэл цорго дахь бөглөрөл.
Моторын асуудал.
Ямар нэгэн бөглөрөл байгаа эсэхийг шалгаж, арилгах.
If the noise persists, discontinue use and contact HILTI service.

7. Техникийн үзүүлэлтүүд

Detailed technical specifications for the HILTI VC 150-6 X Vacuum Cleaner.

ОнцлогДэлгэрэнгүй
БрэндХИЛТИ
Загварын дугаар2167146 (VC 150-6 X)
Эрчим хүчний эх үүсвэрУтастай цахилгаан
Онцлог шинж чанарууд4 Wheels, 6 Gallons Capacity, Push Button Controller, Touch Control
Шүүлтүүрийн төрөлCartridge, Disk, Foam, HEPA Filter
Гадаргуугийн зөвлөмжХивс, Хатуу шал, Хивс, Нүцгэн шал
ҮйлдвэрлэгчХилти
Эхний боломжтой огноо16 оны нэгдүгээр сарын 2019

8. Баталгаат хугацаа ба дэмжлэг

For warranty information, technical support, or service inquiries regarding your HILTI VC 150-6 X Vacuum Cleaner, please contact HILTI customer service directly.

Refer to your purchase documentation or the official HILTI website for specific warranty terms and contact details in your region.

HILTI албан ёсны Webсайт: www.hilti.com

Холбогдох баримт бичиг - VC 150-6 X

Урьдчилсанview Hilti VC 150-6 X / VC 150-10 X Нойтон/Хуурай тоос сорогчийн ашиглалтын заавар
This document provides operating instructions, safety guidelines, technical data, and troubleshooting information for the Hilti VC 150-6 X, VC 150-6 XE, VC 150-10 X, and VC 150-10 XE industrial wet/dry vacuum cleaners.
Урьдчилсанview Hilti DX 6 Bedienungsanleitung: Sicherheit, Betrieb und Wartung des Profi-Befestigungswerkzeugs
Umfassende Bedienungsanleitung für das professionelle Pulver-Befestigungswerkzeug Hilti DX 6. Enthält wichtige Informationen zu Sicherheit, Handhabung, technischen Daten und Fehlerbehebung für den effizienten und zuverlässigen Einsatz.
Урьдчилсанview Hilti DGH 150 Bedienungsanleitung | Diamant-Schleifgerät
Umfassende Bedienungsanleitung für das Hilti DGH 150 Diamant-Schleifgerät. Enthält wichtige Sicherheitshinweise, technische Daten, Anleitungen zur Bedienung und Wartung für professionelle Anwender.
Урьдчилсанview Hilti AG 6D-22-150 Nuron Cordless Angle Grinder: Operating Instructions and Safety Guide
Official operating instructions and safety manual for the Hilti AG 6D-22-150 Nuron cordless angle grinder. Learn about its features, safe usage, maintenance, and troubleshooting for professional applications.
Урьдчилсанview Hilti NRC 6-22 (01) Cordless Rebar Flush Cutter: Operating Instructions
Official operating instructions for the Hilti NRC 6-22 (01) cordless rebar flush cutter. This manual details safe operation, product features, technical specifications, maintenance, and troubleshooting for professional construction use.
Урьдчилсанview HILTI Vacuum Cleaner Parts and Accessories Catalog
Comprehensive list of HILTI vacuum cleaner parts and accessories, including item numbers and descriptions for various VC and AIC models.