Танилцуулга
The TC Electronic FLUORESCENCE SHIMMER REVERB is a shimmering, super-bright reverb pedal designed to create ethereal reverb sounds. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your pedal.
Зураг 1: Дээд тал view of the FLUORESCENCE SHIMMER REVERB pedal.
- Shimmering Reverb: Creates bright, ethereal reverb effects.
- Intuitive 4-Knob Interface: Simple controls for easy sound shaping.
- Жинхэнэ тойрч гарах: Ensures ultimate signal integrity when the effect is disengaged.
- Удаан эдэлгээтэй барилга: Features a robust metal chassis for roadworthy reliability.
Тохиргоо
Follow these steps to connect your FLUORESCENCE SHIMMER REVERB pedal:
- Эрчим хүчний холболт: Connect a 9V DC, 100mA power adapter (center negative) to the power input jack on the pedal. This pedal operates on corded electric power.
- Оролтын холболт: Connect your guitar or other instrument to the 1/4 inch (6.35mm) INPUT jack on the pedal using a standard instrument cable.
- Гаралтын холболт: Connect the 1/4 inch (6.35mm) OUTPUT jack of the pedal to your amplifier or the next effect pedal in your signal chain.
- Байршил: For optimal shimmer reverb effects, place the FLUORESCENCE SHIMMER REVERB pedal towards the end of your effects chain, typically after modulation and drive pedals, but before delay pedals.
Зураг 2: Ар талд view showing input, output, and power connections.
Дөрөө ажиллуулах
The FLUORESCENCE SHIMMER REVERB pedal features a straightforward 4-knob interface for easy control over your sound:
Figure 3: Control knobs for the FLUORESCENCE SHIMMER REVERB pedal.
- REVERB товчлуур: Controls the overall decay time and size of the reverb effect. Turning it clockwise increases the length and spaciousness of the reverb.
- MIX товчлуур: Adjusts the balance between your dry (unaffected) signal and the wet (effected) signal. Turn clockwise for more reverb effect, counter-clockwise for less.
- TONE товчлуур: Shapes the tonal character of the reverb. This control allows you to brighten or darken the shimmer effect, from warm and subtle to crisp and cutting.
- SHIMMER Knob: This dedicated control adds an octave-up effect to the reverb tail, creating the signature ethereal, shimmering sound. Increase for a more pronounced shimmer.
- Хөлийн унтраалга: Engages or disengages the effect. The pedal features true bypass, ensuring your signal remains unaffected when the pedal is off.
Засвар үйлчилгээ
To ensure the longevity and optimal performance of your FLUORESCENCE SHIMMER REVERB pedal, follow these maintenance guidelines:
- Цэвэрлэгээ: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners or solvents, which can damage the finish.
- Хадгалах: Дөрөөг нарны шууд тусгал, хэт температураас хол, сэрүүн, хуурай газар хадгална.
- Холболтууд: Бүх кабелийн холболтууд элэгдэж урагдаж байгаа эсэхийг үе үе шалгаж байх. Домкратын холбогч нь тоос шороо, хог хаягдалгүй эсэхийг шалгаарай.
- Эрчим хүчний хангамж: Always use a regulated 9V DC, 100mA (center negative) power supply. Using an incorrect power supply can damage the unit and void the warranty.
- Биеийн тусламж үйлчилгээ: The pedal features a durable metal chassis. However, avoid dropping the unit or subjecting it to excessive force to prevent internal damage.
Алдааг олж засварлах
If you encounter issues with your FLUORESCENCE SHIMMER REVERB pedal, consult the following common solutions:
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Дуу байхгүй эсвэл сул дохио | Incorrect cable connections, faulty cables, no power, pedal disengaged. | Verify all cables are securely connected. Test with different cables. Ensure power supply is connected and functional. Press the footswitch to engage the effect. |
| Урвуу нөлөө үзүүлэхгүй | MIX knob set too low, REVERB knob set too low, pedal disengaged. | Increase the MIX and REVERB knob settings. Ensure the pedal is engaged. |
| Хүсээгүй чимээ, шуугиан | Faulty power supply, ground loop, interference from other pedals/equipment. | Use a high-quality, isolated power supply. Try connecting the pedal to a different power outlet. Ensure all cables are shielded and in good condition. |
| Shimmer effect is too subtle or too intense | SHIMMER knob setting. | Adjust the SHIMMER knob to achieve the desired intensity. Experiment with the TONE knob to fine-tune the character. |
Үзүүлэлтүүд
- Загвар: FLUORESCENCE SHIMMER REVERB
- ASIN: B079Y519PH
- Барааны жин: 1.1 фунт (0.5 килограмм)
- Бүтээгдэхүүний хэмжээ: 5.2 x 2.91 x 2.28 инч
- Биеийн материал: Металл
- Өнгө: Цэнхэр
- Холбогч төрөл: 1/4 инч (6.35 мм) аудио залгуур
- Техник хангамжийн интерфейс: 1/4 инчийн аудио
- Эрчим хүчний эх үүсвэр: Утастай цахилгаан
- Ботьtage: 9V DC (100mA, center negative recommended)
- Эхний боломжтой огноо: 27 оны хоёрдугаар сарын 2018
Баталгаат болон дэмжлэг
TC Electronic products are designed and manufactured to high standards. For detailed warranty information and technical support, please refer to the official TC Electronic webсайт эсвэл харилцагчийн үйлчилгээтэй шууд холбогдоно уу. Аливаа баталгаат нэхэмжлэлийн хувьд худалдан авалтаа нотлох баримтаа хадгалаарай.
Нэмэлт тусламж авахыг хүсвэл зочилно уу Амазон дээрх TC электроникийн дэлгүүр.
