1. Бүтээгдэхүүн дууссанview
The EPEVER Tracer4210AN-G3 is an advanced Maximum Power Point Tracking (MPPT) solar charge controller designed for off-grid solar systems. It efficiently manages power flow from solar panels to batteries, ensuring optimal charging and extending battery life. This model supports both 12V and 24V battery systems automatically and is compatible with various battery types, including lead-acid and lithium-ion.
This package includes the Tracer4210AN-G3 controller, an MT52 remote meter for monitoring and parameter setting, and a temperature sensor cable (RTS300R47K3.81A) for accurate temperature compensation.
2. Үндсэн шинж чанарууд
- Хэт хурдан мөрдөх хурд, баталгаатай мөрдөх үр ашиг.
- Advanced MPPT control algorithm to minimize maximum power point loss rate and loss time.
- Compatible with lead-acid (Sealed, Gel, Flooded, User) and lithium-ion (LiFePO4, Li(NiCoMn)O2, User) batteries.
- Нийтлэг сөрөг газардуулгын загвар.
- Rated charge current: 40A.
- Max. PV input power: 520W (12V battery) / 1040W (24V battery).
- Макс. PV нээлттэй хэлхээний ботьtage: 100VDC.
- Автомат 12V/24V системийн хэмжээtage хүлээн зөвшөөрөх.
- Auto-saving function with two voltage disconnect levels.
- Цэнэглэх чадал болон гүйдлийн хязгаарлалтын функц.
- Бие даасан ботьtage зохицуулалтын тогтмол хэмжээtage гаралтын функц.
- Battery temperature compensation function (for lead-acid batteries).
- Overheating power reduction function.
- MT52 Remote Meter for real-time data display, alarm information, and diversified load control modes.
3. Багцын агуулга
Бүтээгдэхүүний багцад ихэвчлэн дараахь зүйлс орно.
- 1 x Tracer4210AN-G3 MPPT Solar Charge Controller
- 1 x Remote Meter MT52
- 1 x Temperature Sensor Cable (RTS300R47K3.81A)
- 1 x RS485 кабель
- 2 x User Manuals (one for controller, one for MT52)
4. Суурилуулах заавар
Always Connect the Battery First!
Please read the complete installation instructions to familiarize yourself with the installation steps before proceeding. Do not use electric screwdrivers for connections.
4.1. Утасны диаграм
The diagram above illustrates the typical system connection. Ensure all components are connected in the correct order to prevent damage.
4.2. Холболтын алхамууд
- Батерейг холбох: Connect the battery to the charge controller first. Ensure correct polarity (+ to + and - to -).
- Ачааллыг холбох: DC ачааллыг цэнэг хянагчтай холбоно уу.
- Connect Solar Panel (PV Array): Connect the solar panel to the charge controller last.
4.3. Disconnection Steps
To disconnect the system, reverse the connection order:
- Disconnect Solar Panel (PV Array): Disconnect the solar panel first.
- Ачааллыг салгах: Disconnect the DC load.
- Батерейг салгах: Disconnect the battery last.
4.4. Detailed Wiring
Ensure all wires are securely fastened in their respective terminals. The controller features terminals for Solar Panel (10mm²/8AWG), Battery (10mm²/8AWG), and Load (10mm²/8AWG).
4.5. Connecting Remote Meter (MT52)
The MT52 remote meter connects to the COM port on the charge controller using an RS485 cable. This allows for remote monitoring and parameter adjustments.
4.6. Connecting to PC for Monitoring
For advanced monitoring and parameter setting, the controller can be connected to a PC using a CC-USB-RS485-150U cable. This allows access to the EPEVER PC software for detailed system analysis.
5. Ашиглалтын заавар
5.1. LCD дэлгэцview
The controller features an LCD display for real-time monitoring of system status and parameters. Use the 'SELECT' and 'ENTER' buttons to navigate through the menus.
5.2. Батерейны төрлийг тохируулах
The controller supports various battery types. To set the battery type:
- Press the "ENTER" button and hold for 5 seconds under the battery voltage интерфейс.
- Press the "SELECT" button when the battery type interface is flashing to cycle through options (Sealed, Gel, Flooded, LiFePO4, Li(NiCoMn)O2, User).
- Press the "ENTER" button to confirm the battery type.
For lithium batteries, specific series configurations are available (e.g., LiFePO4 4s/8s, Li(NiCoMn)O2 3s/6s).
5.3. Setting Load Working Mode
The MT52 remote meter allows for diversified load control modes:
- Гарын авлагын хяналт
- Гэрэл Асаах/унтраах
- Гэрэл асаалттай + Таймер
- Цагийн хяналт
Refer to the MT52 User Manual for detailed instructions on setting these modes.
5.4. Setting Battery Parameters (via MT50/MT52)
For advanced battery parameter settings, use the MT50/MT52 remote meter. Navigate to 'Control Para.' in the menu interface. You can adjust parameters such as Over Voltage Disconnect, Charging Limit, Equalize Charging, Boost Charging, Float Charging, Low Voltage Reconnect, and Discharge Limit. When setting parameters for 'USER' battery type, ensure the voltage parameters follow the specified logic (e.g., Over Voltage Ботийг салгахtage > Цэнэглэх хязгаар ботьtage).
6. Техникийн үзүүлэлтүүд
| Параметр | Үнэ цэнэ |
|---|---|
| Нэрлэсэн цэнэгийн гүйдэл | 40 А |
| Системийн ботьtage | 12V/24V Auto Work |
| Хамгийн их PV оролтын чадал (12V) | 520 Вт |
| Хамгийн их PV оролтын чадал (24V) | 1040 Вт |
| Макс. PV Open Circuit Voltage | 100VDC |
| Батерейны эзлэхүүнtage Хамрах хүрээ | 8V~32V |
| Терминал хэмжээ | 6AWG (16мм²) |
| Хэмжээ (L*W*H) | 252 x 180 x 63 мм (9.92 x 7.09 x 2.48 инч) |
| Цэвэр жин | 1.65 кг (3.64 фунт) |
| Дэлгэцийн төрөл | LCD |
| Материал | Lithium (compatible) |
7. Electronic Protections
The Tracer4210AN-G3 controller includes multiple electronic protections to ensure safe operation:
- PV хэт гүйдэл/эрчим хүч
- PV богино холболт
- PV урвуу туйлшрал
- Шөнийн урвуу цэнэглэлт
- Зайны урвуу туйл
- Эзлэхүүнээс дээш зайtage
- Зай хэт цэнэггүй байна
- Зайны хэт халалт
- Хянагчийн хэт халалт
- Лити батерейны бага температур
- Богино холболтыг ачаалах
- Ачаалал хэт их байна
- TVS High Voltage Түр зуурын
8. Алдаа засах
If you encounter issues with your EPEVER MPPT Solar Charge Controller, consider the following:
- Дэлгэц / хүч байхгүй: Ensure the battery is correctly connected and has sufficient voltage. Check all wiring for loose connections or incorrect polarity.
- Цэнэглэхгүй: Verify solar panel connections and ensure adequate sunlight. Check PV input voltage and current on the display. Confirm battery type settings are correct.
- Ачаалах ажиллахгүй байна: Check load connections and ensure the load is not overloaded or short-circuited. Verify load control mode settings on the MT52.
- Хэвийн бус уншилтууд: Ensure temperature sensor is correctly connected and not damaged. Check communication cables for secure connections.
For persistent issues, refer to the detailed troubleshooting section in the full user manual or contact EPEVER technical support.
9. Туслах мэдээлэл
For technical assistance, product inquiries, or warranty claims, please contact EPEVER's authorized sales agent, Goland Century. They offer free technical support and have service centers in various regions.
Холбоо барих мэдээлэл:
- Техникийн дэмжлэг: Available through Goland Century technicians.
- Програм татаж авах: EPEVER PC software can be downloaded from the official EPEVER webсайт.
Please refer to the official EPEVER website or your product documentation for the most up-to-date contact details and support resources.
