Talking Products MP3 дууны чип модуль (SM2-MP3-4MB) зааварчилгааны гарын авлага

1. Бүтээгдэхүүн дууссанview

The Talking Products MP3 Sound Chip Module with 4MB memory is designed for integrating custom audio into various projects. It supports MP3 file playback and offers multiple activation methods, including push button and light sensor. The module is powered by AAA batteries (not included) and allows for easy file transfer via a Micro-B USB connection.

2. Багцын агуулга

• MP3 Sound Chip Module (SM2-MP3-4MB)
• AAA Battery Box (requires 3 x AAA batteries, not included)
• USB cable (for file transfer and power)
• Push Button (pre-wired)
• Speaker (40mm Diameter, 8 Ohm 0.5W)
• Self-Adhesive Label

Note: Some components like the light sensor or alternative buttons may be sold separately or included in specific kits.

3. Бүтээгдэхүүний онцлог

• 4MB Built-in Flash Memory: Provides approximately 4 minutes of playback. Option to alter the sample rate to achieve 8 minutes of playback.
• USB холболт: Download MP3 files via the USB socket.
• Олон тоглуулах сонголтууд: Includes push button and light sensor activation.
• File Тоглуулах: Playback one single file эсвэл олон files in sequence (sorted by file нэр).
• Олон талын хэрэглээ: Ideal for talking gifts, cards, crafts, train sets, models, photo frames, and cosplay accessories.

4. Тохируулах заавар

4.1 Бүрэлдэхүүн хэсгүүдийн тодорхойлолт

This image illustrates the main components of the MP3 Sound Chip Module. It shows the battery box with an ON/OFF switch, the PCB (Printed Circuit Board) with a Micro-B type USB socket for file transfer and a mode switch, a 40mm diameter 8 Ohm 0.5W speaker, and a 12x12mm play button. Wires connect these components, with lengths specified (150mm for battery to PCB, 50mm for button to PCB, 50mm for speaker to PCB). A 2-pin plug and socket are present to connect alternative play buttons or switches.

4.2 Connecting Power and Playback Mechanism

1. Батерейг оруулах: Open the AAA battery box and insert 3 x AAA batteries (not included), ensuring correct polarity.
2. Connect Battery Box: Plug the connector from the AAA battery box into the corresponding port on the MP3 Sound Chip Module PCB.
3. Connect Play Button/Sensor:
   • If using the included push button, ensure it is securely plugged into the "PLAY" port on the PCB.
   • If using an alternative sensor (e.g., light sensor, magnetic sensor), plug it into the appropriate port on the PCB.

   

   This image shows the MP3 Sound Module with a light sensor connected. The light sensor replaces the standard push button for activation. The sensor is a small, cylindrical component with two wires leading to a connector that plugs into the module's playback port.

   

   This image demonstrates the MP3 Sound Module connected to a larger, red push button. This illustrates the flexibility of connecting different types of buttons or switches to the module's playback input.
4. Чанга яригчийн холболт: The speaker is pre-wired to the module. Ensure the connection is secure.

5. Аудио File Менежмент

5.1 USB Cable Requirements

This image shows a Micro-B USB to Type-A USB cable. This type of cable is required for MP3 file transfer to the module and is commonly used for many USB devices. It is crucial to use a 'Data-transfer' type cable, not just a charging-only cable. This cable is typically not included with the module and must be acquired separately if needed.

5.2 Uploading MP3 Files

1. Компьютерт холбогдох: Turn the module's ON/OFF switch to the "ON" position. Connect the module to your computer using a data-transfer Micro-B USB cable. The module should appear as an external drive (e.g., "NO NAME" on Mac, or a USB Drive letter on PC).
2. Одоо байгаа зүйлийг устгах Files: It is recommended to delete any pre-loaded or old MP3 files from the module's drive before adding new ones.
   • Important for Mac Users: Нуугдсан files (e.g., ".DS_Store" or "._*.mp3") can cause playback issues (e.g., requiring multiple presses to skip). Use Terminal commands (ls -a руу view, find . -maxdepth 1 -type f -name '._*.mp3' -delete to delete) to ensure all hidden files хасагдсан.
   • DO NOT FORMAT THE UNIT.
3. Transfer New MP3s: Copy and paste your desired MP3 audio files directly into the module's drive.
   • File Формат: Өөрийн аудиог баталгаажуулна уу files are in MP3 format. The unit will not play other file formats. You can convert non-MP3 files using dedicated free webсайтууд.
   • Аудио үзүүлэлтүүд: For optimal performance and to avoid issues like multiple button presses, convert MP3 files to MONO, 44.1kHz, 16-bit, and 128 kbps using audio editing software like Audacity.
   • Хүчин чадал: The 4MB memory provides approximately 4 minutes of playback. Adjusting the sample rate can extend this to 8 minutes. The total capacity of uploaded MP3 files must not exceed the module's memory.
4. Аюулгүй гаргана уу: Нэг удаа file transfer is complete, safely eject the external drive from your computer before unplugging the USB cable.

5.3 Recording Function (Third-Generation Modules)

Some third-generation modules may feature a direct recording function. If your module has this feature:

1. Ensure Switch is ON: Confirm the module's ON/OFF switch is in the "ON" position.
2. Activate Recording: Press and hold the dedicated record button (often a small white dot on the PCB) for 2 seconds until you hear a beep. Release the button to start recording.
3. Бичлэгийг зогсоох: Press the record button again. You will hear two beeps, indicating recording is complete.
4. Тоглуулах бичлэг: Press the play button to start playing your recorded audio.

Видео тайлбар: This video demonstrates the recording and playback functions of a programmable sound recorder module. It shows how to turn on the switch, use the play button to cycle through pre-loaded songs, adjust volume levels, and then use a dedicated record button to record new audio. The process involves pressing and holding for 2 seconds to start recording, then pressing again to stop, followed by playback using the play button.

6. Ашиглалтын заавар

1. Асаах: Slide the ON/OFF switch on the battery box to the "ON" position.
2. Тоглуулах:
   • Дарах товчлуур: Press the connected push button once to play the first audio file. Press it again to play the next file in sequence. If not pressed again, the current file will stop after playing.
   • Гэрэл мэдрэгч: If a light sensor is connected, the module will play audio when exposed to light (e.g., opening a box). Bringing it to complete darkness and then exposing it to light will trigger playback.
   • Соронзон мэдрэгч: If a magnetic sensor is connected, the module will play when the magnet is moved away from the sensor and stop when the magnet is brought close.
3. Дууны тохируулга: The module typically has a volume adjustment button or switch on the PCB. Pressing this button will cycle through different volume levels (e.g., 5 levels).

Видео тайлбар: This video demonstrates the functionality of the MP3 Recordable Sound Chip Module. It shows how the module plays audio when activated by a button or sensor, and how the sound volume can be adjusted. The video highlights the module's use in models and crafts, emphasizing its versatility.

7. Алдаа засах

• Module Not Recognized by PC/MAC:
  • Ensure the module's ON/OFF switch is in the "ON" position before connecting to the computer.
  • Verify that you are using a data-transfer USB cable, not a charging-only cable.
  • Try connecting to a different USB port or another computer/MAC.
  • Double-check that all cable connections are firm and stable.
• Multiple Button Presses Required for Next Track (Mac Users):
  • This is often caused by hidden ".DS_Store" or "._*.mp3" files created by macOS.
  • Connect the module to your Mac. Open Terminal.
  • Navigate to the module's directory (e.g., cd /Volumes/NO\ NAME).
  • Ашиглах ls -a бүгдийг жагсаах files, including hidden ones.
  • Delete hidden MP3 files using a command like: find . -maxdepth 1 -type f -name '._*.mp3' -delete.
  • Safely eject the module.
• Дуу байхгүй эсвэл дуу багатай:
  • Check if the ON/OFF switch is in the "ON" position.
  • Ensure batteries are correctly inserted and have sufficient charge.
  • Adjust the volume using the dedicated volume button/switch on the PCB.
  • Verify that the speaker connection is secure.
  • MP3-г баталгаажуулна уу files are correctly formatted (MONO, 44.1kHz, 16-bit, 128 kbps).
• Unit Not Playing While Plugged into PC/MAC:
  • This is normal behavior. The module typically enters data transfer mode when connected to a computer and will not play audio.

8. Техникийн үзүүлэлтүүд

9. Баталгаат хугацаа ба дэмжлэг

For warranty information or technical support, please refer to the documentation included with your product or visit the official Talking Products website. Contact details for Talking Products Ltd are typically provided in the product packaging or user guide.