Pro-Ject Primary E (OM NN) - Matte Black

Pro-Ject Primary E эргэдэг ширээний зааварчилгаа

Model: Primary E (OM NN) - Matte Black

Танилцуулга

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Pro-Ject Primary E turntable. Please read this manual carefully before using the product to ensure proper function and longevity. Keep this manual for future reference.

Pro-Ject Primary E Turntable in Matte Black with dust cover open

Figure 1: Pro-Ject Primary E Turntable with dust cover open, showcasing its matte black finish and minimalist design.

Аюулгүй байдлын чухал заавар

  • Эдгээр зааврыг уншина уу.
  • Эдгээр зааврыг хадгал.
  • Бүх сэрэмжлүүлгийг анхаарч үзээрэй.
  • Бүх зааврыг дагана уу.
  • Энэ төхөөрөмжийг усны ойролцоо бүү ашигла.
  • Зөвхөн хуурай даавуугаар цэвэрлэ.
  • Агааржуулалтын нүхийг хааж болохгүй. Үйлдвэрлэгчийн зааврын дагуу суурилуулна.
  • Радиатор, халаалтын төхөөрөмж, зуух болон бусад төхөөрөмж (үүнд ampөргөгч) дулаан үүсгэдэг.
  • Цахилгааны утсыг гишгэх, хавчихаас хамгаалаарай, ялангуяа залгуур, залгуур, төхөөрөмжөөс гарах цэг дээр.
  • Зөвхөн үйлдвэрлэгчээс заасан хавсралт/дагалдах хэрэгслийг ашиглана уу.
  • Аянга шуурганы үед эсвэл удаан хугацаагаар ашиглаагүй үед энэ төхөөрөмжийг цахилгааны залгуураас салга.
  • Бүх үйлчилгээг мэргэшсэн үйлчилгээний ажилтнуудад шилжүүлээрэй. Төхөөрөмж нь цахилгаан тэжээлийн утас, залгуур гэмтсэн, шингэн асгарсан, эд зүйл унасан, бороо, чийгэнд өртсөн, хэвийн ажиллахгүй байгаа тохиолдолд засвар үйлчилгээ хийх шаардлагатай. , эсвэл хасагдсан.

Тохиргоо

1. Савлагааг задлах болон агуулгыг шалгах

Carefully unpack all components from the packaging. Retain the packaging for future transport or storage. Verify that all items listed below are present:

  • Primary E Phono turntable with Ortofon OM cartridge
  • Gold-plated RCA Phono Cable
  • Эсгий дэвсгэр
  • Тоос бүрхэвч
  • 7 инчийн ганц бие гуталд зориулсан адаптер
  • Цахилгаан хангамж
  • Аллен түлхүүр
  • Stylus даралт хэмжигч

2. Байрлуулах

Place the turntable on a stable, level surface, away from direct sunlight, heat sources, and excessive vibration. Ensure adequate ventilation around the unit.

3. Угсралт

  1. Хавтан ба бүс суурилуулах:

    Carefully place the platter onto the spindle. Locate the drive belt and stretch it around the motor pulley and the outer rim of the platter. Ensure the belt is seated correctly and not twisted.

    Close-up of the turntable's belt drive mechanism

    Зураг 2: Нарийвчилсан view of the belt drive system, showing the belt correctly positioned around the motor pulley and platter.

  2. Cartridge and Tonearm Setup:

    The Ortofon OM NN cartridge is pre-mounted and aligned. Ensure the stylus guard is removed before operation. The tonearm features an 8.6-inch aluminum design with sapphire bearings.

    Close-up of the Ortofon OM NN cartridge and tonearm

    Figure 3: Close-up of the pre-mounted Ortofon OM NN cartridge and the tonearm, ready for playback.

    Close-up of the tonearm base and counterweight

    Зураг 4: View of the tonearm base, showing the cueing lever and anti-skate mechanism.

  3. Тоосны бүрхүүл суурилуулах:

    Attach the dust cover to the hinges at the rear of the turntable. The hinges are adjustable.

    Pro-Ject Primary E Turntable without dust cover, showing the hinge points

    Figure 5: The turntable base without the dust cover, illustrating the points where the dust cover hinges attach.

4. Холболтууд

  • Аудио холболт: Connect the supplied gold-plated RCA phono cable from the turntable's output to the phono input of your amplifier эсвэл phono preamplifier. Ensure correct left and right channel connections.
  • Эрчим хүчний холболт: Connect the power supply to the DC input on the turntable and then plug it into a suitable wall outlet.

Ашиглалтын заавар

1. Асаах/унтраах

The turntable is powered on by connecting the power supply. There is no separate power switch. To turn off, disconnect the power supply.

2. Хурдны сонголт

The Primary E supports 33 1/3 and 45 RPM playback. To change speed, manually move the drive belt to the appropriate step on the motor pulley. The larger diameter step is for 33 1/3 RPM, and the smaller diameter step is for 45 RPM.

3. Бичлэг тоглуулах

  1. Бичлэгийг тавган дээр тавьж, голд нь байрлуулсан эсэхийг шалгаарай.
  2. If using a 7-inch single, place the adapter on the spindle first.
  3. Дохио өгөх хөшүүргийг ашиглан тонер гарыг өргө.
  4. Тонер гарыг пянзны хүссэн эхлэх ховил дээр болгоомжтой байрлуул.
  5. Gently lower the tonearm using the cueing lever. The stylus will descend onto the record and playback will begin.

4. Тоглуулахыг зогсоох

  1. Дохио өгөх хөшүүргийг ашиглан тонер гарыг өргө.
  2. Тонер гарыг хэвийн байдалд нь буцаана уу.
  3. Gently lower the cueing lever to secure the tonearm.
  4. Бичлэгийг тавган дээрээс гаргаж ав.

Засвар үйлчилгээ

1. Цэвэрлэгээ

  • Тоосны бүрхэвч: Тоосны бүрхэвчийг зөөлөн, damp даавуу. Зүлгүүрийн цэвэрлэгчээс зайлсхий.
  • Turntable Chassis: Wipe the matte black chassis with a soft, dry cloth. Do not use chemical cleaners.
  • Зүү: Use a dedicated stylus brush to gently clean the stylus from back to front. Clean regularly to prevent debris buildup.
  • Бичлэгүүд: Keep your records clean using a record brush or cleaning solution to minimize dust and static.

2. Belt Replacement

Over time, the drive belt may stretch or degrade, affecting speed stability. If you notice inconsistent speed or the belt slipping, it may be time for a replacement. Contact Pro-Ject support or an authorized dealer for genuine replacement belts.

3. Cartridge and Stylus Care

The stylus is a delicate component. Avoid touching it with your fingers. If the stylus becomes bent or damaged, it will need to be replaced. The Ortofon OM NN cartridge allows for stylus replacement without replacing the entire cartridge body.

Алдааг олж засварлах

If you encounter issues with your turntable, consult the following table before contacting support.

АсуудалБоломжит шалтгаанШийдэл
No sound from one or both channels.
  • Incorrect RCA cable connection.
  • Stylus not properly seated or damaged.
  • Amplifier/receiver input not selected correctly.
  • No phono preamplifier or incorrect input.
  • Эргүүлэгч болон эргэлдэгч хоёрын аль алинд нь RCA кабелийн холболтыг шалгана уу ampнастан.
  • Inspect stylus; re-seat or replace if necessary.
  • Ensure correct input (e.g., "Phono") is selected on your ampнастан.
  • Connect to a phono input or use an external phono preampнастан.
Гажуудсан эсвэл тодорхой бус дуу чимээ.
  • Dirty stylus or record.
  • Буруу мөрдөх хүч.
  • Damaged stylus.
  • Clean stylus and record.
  • Verify and adjust tracking force using the supplied gauge.
  • Replace stylus.
Turntable speed is incorrect (too fast/slow).
  • Belt not correctly positioned.
  • Worn or stretched drive belt.
  • Incorrect motor pulley step selected.
  • Ensure belt is properly seated on platter and motor pulley.
  • Хөдөлгүүрийн бүсийг солих.
  • Confirm belt is on the correct step for 33 1/3 or 45 RPM.
Record skipping.
  • Бохирдсон эсвэл гэмтсэн бичлэг.
  • Буруу мөрдөх хүч.
  • Turntable not level.
  • Clean record thoroughly.
  • Хяналтын хүчийг тохируулна уу.
  • Ensure turntable is on a level surface.

Үзүүлэлтүүд

  • Загвар: Primary E (OM NN) - Matte Black
  • Брэнд: Pro-Ject
  • Бүтээгдэхүүний хэмжээ: 16.54 x 12.99 x 4.41 инч (42 x 33 x 11.2 см)
  • Барааны жин: 11.5 фунт (5.2 кг)
  • Материал: Composite Fiber, Stainless Steel, Brass, Aluminum
  • Тоник зэвсэг: 8.6-inch aluminum tonearm with sapphire bearings
  • Хөтөч систем: Belt-drive with synchronous motor
  • Хайрцаг: Ortofon OM NN phono cartridge (pre-mounted)
  • Хурд: 33 1/3, 45 RPM (manual speed change)
  • Онцлогууд: Vibration absorbing feet, machined special composite fiber chassis, elegant dust cover with adjustable hinges.
  • Эрчим хүчний хэрэглээ (асаах горим): 4.50 ватт
  • Оруулсан бүрэлдэхүүн хэсгүүд: Primary E Phono with Ortofon OM cartridge, Gold-plated RCA Phono Cable, Felt mat, Dust cover, Adapter for 7-inch singles, Power supply, Allen key, Stylus pressure gauge.

Баталгаат болон дэмжлэг

Баталгаат хугацааны мэдээлэл

Pro-Ject Audio Systems products are manufactured to the highest quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Pro-Ject Audio Systems webсайт. Баталгаат нэхэмжлэл гаргахын тулд худалдан авалтаа нотлох баримтаа хадгалаарай.

Хэрэглэгчийн дэмжлэг

For technical assistance, troubleshooting beyond this manual, or inquiries about replacement parts, please contact Pro-Ject Audio Systems customer support or your authorized dealer. You can find more information and contact details on the official Pro-Ject webсайт: Visit the Pro-Ject Store on Amazon or search for the official Pro-Ject Audio Systems webсайт.

Холбогдох баримт бичиг - Primary E (OM NN) - Matte Black

Урьдчилсанview Pro-Ject A1 эргэдэг тавцан: Хэрэглэгчийн гарын авлага, тохиргоо, техникийн үзүүлэлтүүд
Pro-Ject A1 эргэдэг тавцангаа тохируулах, ажиллуулах, засвар үйлчилгээ хийх цогц заавар. Техникийн үзүүлэлтүүд, алдааг олж засварлах зөвлөмжүүд, баталгаат мэдээллийг багтаасан болно.
Урьдчилсанview Pro-Ject A1 эргэдэг тавцангийн хэрэглэгчийн гарын авлага
Техникийн үзүүлэлтүүд, засвар үйлчилгээ, алдааг олж засварлах зэрэг Pro-Ject A1 эргэлтийн тавцанг ашиглах, тохируулах заавар.
Урьдчилсанview Pro-Ject The Beatles 1964 Recordplayer User Manual and Specifications
Comprehensive user manual and technical specifications for the Pro-Ject The Beatles 1964 Recordplayer, including setup, operation, maintenance, and troubleshooting. Learn how to connect, adjust, and care for your turntable.
Урьдчилсанview Pro-Ject RPM 3 нүүрстөрөгчийн эргэлдэгч: Хэрэглэгчийн гарын авлага болон тохиргооны гарын авлага
Pro-Ject RPM 3 Carbon өндөр нягтралтай эргэдэг тавиурыг тохируулах, ажиллуулах, засвар үйлчилгээ хийх цогц зааварчилгаа. Хайрцаг суурилуулах, тохируулах, техникийн үзүүлэлтүүд болон алдааг олж засварлах ажлыг багтаасан болно. Мөн Sumiko Oyster цувралын фоно хайрцгийг хамарна.
Урьдчилсанview Pro-Ject A1.2 эргэдэг тавцан: Хэрэглэх заавар болон тохируулах гарын авлага
Pro-Ject A1.2 эргэдэг тавиурыг тохируулах, ажиллуулах, засвар үйлчилгээ хийх цогц зааварчилгаа, үүнд техникийн үзүүлэлтүүд болон алдааг олж засварлах зөвлөмжүүд орно.
Урьдчилсанview Pro-Ject A1.2 Эргүүлэгч: Хэрэглэх заавар болон техникийн үзүүлэлтүүд
Pro-Ject A1.2 пянз тоглуулагчийн ашиглалт, тохиргоо, засвар үйлчилгээ болон техникийн үзүүлэлтүүдийн талаарх цогц зааварчилгаа. Аюулгүй байдлын мэдээлэл болон алдааг олж засварлах гарын авлага багтсан болно.