Бүтээгдэхүүн дууссанview
The Utilitech GYQ27-W is a white wire-in replacement motion sensor designed for outdoor lighting applications. It provides automatic light control by detecting motion and activating the light for a set duration. This sensor offers wide coverage and includes features for energy efficiency and manual override.
Зураг 1: Урд view of the Utilitech GYQ27-W White Wire-in Replacement Motion Sensor. The sensor features a compact, white housing with a translucent detection lens at the front and a threaded base for wire-in installation.
Гол онцлогууд
- Automatic Light Control: Turns lights on when motion is detected.
- Тохируулах цаг хэмжигч: Light remains on for 1, 3, or 10 minutes after motion ceases, with a 5-second test mode.
- Өргөн хамрах хүрээ: Provides up to 240° coverage and 69-ft of downward perimeter protection.
- Үүр бүрхээс хүртэл мэдрэгч: Automatically activates at dusk and deactivates at dawn.
- Өргөн нийцтэй байдал: Compatible with dimmable LED, dimmable CFL, halogen, and incandescent bulbs.
- Эрчим хүчний үр ашиг: Features 2-level brightness technology.
- Гараар хүчингүй болгох: Allows the light to operate constantly for a selected period.
Тохиргоо ба суурилуулалт
Proper installation is crucial for optimal performance and safety. It is recommended to consult a qualified electrician if you are unsure about any steps.
Аюулгүй байдлын урьдчилан сэргийлэх арга хэмжээ
- Суурилуулалт, засвар үйлчилгээ хийхээс өмнө таслагчийн хүчийг үргэлж унтраа.
- Ensure wiring connections are secure and comply with local electrical codes.
- Хамгийн их ватаас хэтрэхгүйtage rating of the connected lighting fixture.
Суулгах алхамууд
- Цахилгааныг унтраах: Locate the circuit breaker controlling the outdoor light fixture and switch it to the OFF position. Verify power is off using a voltage шалгагч.
- Remove Existing Sensor (if applicable): Carefully disconnect the wiring from the old motion sensor or light fixture.
- Утас холбох: Follow the wiring diagram provided with your specific light fixture. Typically, this involves connecting the sensor's wires (line, load, neutral) to the corresponding wires from the power supply and the light fixture. Ensure all connections are tight and insulated with wire nuts.
- Холбох мэдрэгч: Securely mount the Utilitech GYQ27-W motion sensor to the desired location. Ensure it has a clear line of sight to the area you wish to monitor.
- Эрчим хүчийг сэргээх: Once all connections are secure and the sensor is mounted, turn the power back on at the circuit breaker.
Ашиглалтын заавар
The GYQ27-W motion sensor offers several adjustable settings to customize its operation.
Тохиргоог тохируулах
- Цагийн тохиргоо: The sensor allows you to set the duration the light remains on after motion is detected. Common settings are 1, 3, or 10 minutes. Refer to the sensor's physical controls for specific adjustment methods (e.g., dial, switch).
- Туршилтын горим: A 5-second test mode is available for initial setup and aiming. In this mode, the light will turn on for approximately 5 seconds each time motion is detected, regardless of the set time.
- Үүр бүрхээс хүртэл онцлог: The integrated photocell automatically prevents the light from activating during daylight hours, conserving energy. The sensor will only activate the light when ambient light levels fall below a certain threshold.
- Мэдрэмжийн тохируулга: Some models may include a sensitivity dial to adjust the range or sensitivity of motion detection. Adjust this to prevent false triggers from small animals or distant objects.
Гараар хүчингүй болгох
To keep the light on continuously for a period, you can typically activate the manual override function. This is often done by quickly turning the light switch OFF and then ON within a few seconds. The light will then stay on until the override period expires or the switch is cycled again. Consult the specific instructions that came with your sensor for precise manual override steps.
Засвар үйлчилгээ
The Utilitech GYQ27-W motion sensor requires minimal maintenance to ensure long-term performance.
- Цэвэрлэгээ: Мэдрэгч линзийг зөөлөн, d-ээр үе үе арчина.amp cloth to remove dust, dirt, or cobwebs that may obstruct the sensor's view. Do not use abrasive cleaners.
- Шалгалт: Annually inspect the wiring and mounting for any signs of wear, damage, or loosening. Ensure the sensor is still securely positioned.
- Байгаль орчны хүчин зүйлүүд: Keep the area around the sensor clear of obstructions like tree branches or tall shrubs that could block the detection field or cause false triggers due to wind movement.
Алдааг олж засварлах
If your Utilitech GYQ27-W motion sensor is not functioning as expected, refer to the following common issues and solutions:
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Хөдөлгөөн илэрсэн үед гэрэл асахгүй. |
|
|
| Гэрэл тасралтгүй асдаг. |
|
|
| Light turns on for no apparent reason (false triggers). |
|
|
Үзүүлэлтүүд
| Атрибут | Үнэ цэнэ |
|---|---|
| Загварын дугаар | GYQ27-W |
| Брэнд | Ашигтай технологи |
| Өнгө | Цагаан |
| Эрчим хүчний эх үүсвэр | Утастай цахилгаан |
| Бүтээгдэхүүний хэмжээс | 5 x 3 x 2 инч |
| Зүйлийн жин | 1.2 фунт |
| Хамгийн их хүрээ | 69 фут |
| Хамрах өнцөг | 240 ° хүртэл |
| Тохиромжтой чийдэн | Dimmable LED, Dimmable CFL, Halogen, Incandescent |
Баталгаат болон дэмжлэг
Information regarding specific warranty terms for the Utilitech GYQ27-W motion sensor is not provided in this manual. For warranty details, technical support, or replacement parts, please refer to the original product packaging or contact Utilitech customer service directly.
You may also visit the official Utilitech website for the most up-to-date information and support resources.
