Sena SF1 Мотоциклийн Bluetooth холбооны системийн хэрэглэгчийн гарын авлага

1. Танилцуулга

The Sena SF1 Bluetooth Communication System is designed to provide essential communication features for motorcycle riders. This system facilitates 2-way intercom communication with a passenger, allowing for clear conversations up to 100 meters (110 yards) in open terrain. It also enables seamless connectivity with your mobile device for streaming music, managing phone calls, and receiving turn-by-turn GPS directions. Key features include VOX Phone commands, Audio Overlay, Quick Charging, and microphone mute options, enhancing your riding experience with convenience and safety.

2. Багцын агуулга

The Sena SF1 package includes the following components:

• Sena SF1 Main Unit
• Дуулга Clamp Иж бүрдэл
• Илтгэгчид
• Утастай микрофон
• Утастай микрофон
• USB Power & Data Cable (USB-C type)
• Чанга яригчдад зориулсан Velcro дэвсгэр
• Velcro Pad for Wired Boom Microphone
• Velcro Pad for Wired Microphone
• Чанга яригчийн дэвсгэр (зузаан)
• Аллен эрэг чангалах түлхүүр

Note: The specific component "Sena 843-01297" refers to the main unit or a specific part number within the kit.

3. Бүтээгдэхүүн дууссанview

The Sena SF1 unit features a sleek, low-profile design with intuitive controls for easy operation while riding.

Зураг 3.1: Дээд тал View of Sena SF1 Main Unit. This image displays the top of the Sena SF1 communication system, highlighting the central control button and the plus (+) and minus (-) buttons for volume and navigation. A blue indicator light is visible at the top center.

Зураг 3.2: Өнцөг View of Sena SF1 Main Unit. An angled perspective of the SF1 unit, showing its compact form factor and the arrangement of its primary control buttons. The blue indicator light is also visible.

Figure 3.3: Sena SF1 USB Charging Port. This image focuses on the USB charging port, typically located on the side or bottom of the unit, protected by a rubber flap to ensure water resistance.

Figure 3.4: Sena SF1 Side View with Helmet Clamp. Нэг тал view of the SF1 unit attached to a helmet clamp, illustrating how the unit integrates with the helmet and the connection points for speakers and microphone cables.

3.1 Хяналт ба үзүүлэлтүүд

• Төвийн товчлуур: Multi-functional button for power, pairing, and call management.
• (+) Товчлуур: Increases volume, navigates forward through menus or tracks.
• (-) товчлуур: Decreases volume, navigates backward through menus or tracks.
• LED үзүүлэлт: Displays device status (power, charging, Bluetooth connection).

4. Суурилуулалт

Proper installation ensures optimal performance and comfort. The SF1 is designed to fit on almost any helmet.

4.1 Үндсэн төхөөрөмжийг суурилуулах

1. Choose a suitable location on the left side of your helmet for the clamp нэгж.
2. Loosen the screws on the helmet clamp and slide it between the outer shell and the inner padding of the helmet. Tighten the screws securely.
3. Alternatively, use the adhesive mount if the clamp unit is not suitable for your helmet type. Ensure the surface is clean and dry before applying.
4. Slide the SF1 main unit onto the mounted clamp байрандаа орох хүртэл.

4.2 Чанга яригч болон микрофон суурилуулах

1. Attach the speakers to the Velcro pads inside the helmet's ear pockets. Use the thick speaker pads if needed for better fit and audio quality.
2. Connect the speaker cables to the main unit.
3. For full-face helmets, attach the wired microphone to the inside of the chin bar using the Velcro pad. Position it close to your mouth.
4. For open-face or modular helmets, attach the wired boom microphone to the inside of the helmet, ensuring it is positioned correctly for clear voice pickup.
5. Route all cables neatly under the helmet padding to avoid interference and ensure comfort.

5. Тохиргоо

5.1 Асаах/унтраах

• Асаах: -г удаан дар Төвийн товчлуур болон (+) Товчлуур 1 секундын турш.
• Унтраах: -г удаан дар Төвийн товчлуур болон (+) Товчлуур 5 секундын турш.

5.2 Bluetooth Pairing with Mobile Phone

1. With the SF1 powered off, press and hold the Төвийн товчлуур for 5 seconds until the LED flashes red and blue alternately, indicating pairing mode.
2. Гар утсан дээрээ Bluetooth-г идэвхжүүлж, төхөөрөмж хайх.
3. Select "Sena SF1" from the list of detected devices.
4. If prompted, enter PIN "0000". The LED will turn blue when pairing is successful.

5.3 Intercom Pairing (2-Way)

1. Ensure both SF1 units are powered on.
2. On one unit, press and hold the Төвийн товчлуур for 5 seconds until the LED flashes red.
3. On the second unit, press and hold the Төвийн товчлуур for 5 seconds until the LED flashes red.
4. The units will automatically pair and connect. The LED on both units will turn blue.

5.4 Sena Utility програм

For advanced configuration and firmware updates, download the Sena Utility App from your smartphone's app store. The app allows you to customize settings, manage speed dial presets, and access a quick guide.

6. Ашиглалтын заавар

6.1 Дууны хяналт

• Эзлэхүүнийг нэмэгдүүлэх: дээр товшино уу (+) Товчлуур.
• Эзлэхүүнийг бууруулах: дээр товшино уу (-) товчлуур.

6.2 Хөгжмийн функцууд

• Хөгжим тоглуулах/түр зогсоох: дээр дарна уу Төвийн товчлуур 1 секундын турш.
• Дараагийн дуу: дээр дарна уу (+) Товчлуур 1 секундын турш.
• Өмнөх бичлэг: дээр дарна уу (-) товчлуур 1 секундын турш.

6.3 Утасны дуудлагын функцууд

• Дуудлагад хариулах: дээр товшино уу Төвийн товчлуур.
• Дуудлага дуусгах: дээр дарна уу Төвийн товчлуур 2 секундын турш.
• Дуудлагаас татгалзах: дээр дарна уу Төвийн товчлуур for 2 seconds when a call is incoming.
• Voice Dial (VOX Phone): дээр дарна уу Төвийн товчлуур 3 секундын турш.
• Микрофоны дууг хаах: дээр дарна уу (+) Товчлуур болон (-) товчлуур simultaneously for 1 second during a call.

6.4 Дотоод холбооны холбоо

• Интерком эхлэх/Төгсгөл: дээр товшино уу Төвийн товчлуур.
• Audio Overlay: The SF1 supports Audio Overlay, allowing you to listen to music or GPS instructions while engaged in intercom conversation. The audio levels will adjust automatically.

6.5 GPS навигаци

Once paired with your smartphone, turn-by-turn GPS directions from your navigation app will be transmitted directly to your SF1 speakers. Audio Overlay ensures that navigation prompts are heard even during other audio activities.

7. Засвар үйлчилгээ

7.1 Зайг цэнэглэх

• Connect the SF1 to a USB power source using the provided USB Power & Data Cable.
• The LED indicator will turn red during charging and blue when fully charged.
• Бүрэн цэнэглэхэд ихэвчлэн ойролцоогоор зарцуулдаг 1.5 цаг.
• The SF1 offers a talk time of up to 13 цаг бүрэн цэнэглэлтээр.
• The Quick Charging feature allows for faster charging when time is limited.

7.2 Цэвэрлэгээ ба хадгалах

• Төхөөрөмжийг зөөлөн арчиж арчихamp даавуу. Химийн хатуу бодис, уусгагчийг бүү ашигла.
• Усны хамгаалалтыг хадгалахын тулд USB портын тагийг найдвартай хаасан эсэхийг шалгаарай.
• Store the SF1 in a cool, dry place when not in use.

8. Алдаа засах

8.1 Үйлдвэрийн тохиргоонд дахин оруулах

If the SF1 is not functioning correctly, a factory reset may resolve the issue. To perform a factory reset, press and hold the Төвийн товчлуур for 12 seconds until the LED flashes red rapidly. Then, tap the Төвийн товчлуур to confirm. The unit will power off and reset to default settings.

8.2 Нийтлэг асуудлууд

• Эрчим хүчгүй: Ensure the battery is charged. Connect to a charger and check the LED indicator.
• Аудио байхгүй: Check speaker connections. Ensure volume is not at minimum. Re-pair with your device.
• Интерком салгах: Ensure both units are within range (100 meters in open terrain) and re-initiate intercom connection.
• Bluetooth холболтын асуудал: Ensure the SF1 is in pairing mode (red and blue flashing LED) and your phone's Bluetooth is enabled. Try restarting both devices.

9. Техникийн үзүүлэлтүүд

10. Баталгаат хугацаа ба дэмжлэг

10.1 Баталгаат хугацааны мэдээлэл

Sena products are covered by a limited warranty against manufacturing defects. The EU Spare Part Availability Duration is 2 years. For specific warranty terms and conditions, please refer to the official Sena webсайтаас лавлах эсвэл хэрэглэгчийн дэмжлэгтэй холбогдоно уу. Баталгаат хугацааны нэхэмжлэл гаргахын тулд худалдан авалтын баримтаа хадгална уу.

10.2 Хэрэглэгчийн дэмжлэг

For technical assistance, troubleshooting, or general inquiries, please visit the official Sena website for support resources, FAQs, and contact information. You can also utilize the Sena Utility App for quick access to support and product information.