Einhell GE-LC 36/35 Li Solo Battery Chainsaw

1. Танилцуулга

This manual provides essential instructions for the safe and effective operation, maintenance, and care of your Einhell GE-LC 36/35 Li Solo Battery Chainsaw. Please read this manual thoroughly before using the chainsaw for the first time and keep it for future reference. This product is designed for cutting wood and similar materials.

Image 1.1: The Einhell GE-LC 36/35 Li Solo Battery Chainsaw, showing the main unit and an outline of where the batteries are inserted.

2. Аюулгүй ажиллагааны заавар

Цахилгаан хэрэгсэлтэй ажиллахдаа аюулгүй байдлыг үргэлж анхаарч үзээрэй. Эдгээр зааврыг дагаж мөрдөхгүй байх нь ноцтой гэмтэл эсвэл эд хөрөнгийн хохирол учруулж болзошгүй.

2.1 Ерөнхий аюулгүй байдал

• Хувийн хамгаалах хэрэгсэл (PPE) өмсөх: Always wear safety glasses, hearing protection, gloves, sturdy footwear, and appropriate clothing. A safety helmet with a face shield is recommended.
• Ажлын талбай: Ensure the work area is clear of bystanders, children, and pets. Keep the area well-lit and free from obstacles.
• Цаг агаарын нөхцөл: Do not use the chainsaw in rain or damp conditions. Avoid operating in strong winds.
• Батерейны аюулгүй байдал: Use only recommended Einhell Power X-Change batteries. Do not expose batteries to heat or fire.

2.2 Гинжин хөрөөний тусгай аюулгүй байдал

• Урьдчилан сэргийлэх арга хэмжээ: Be aware of the kickback danger zone. Avoid cutting with the tip of the guide bar. Maintain a firm grip with both hands.
• Гинжин тоормос: Ensure the chain brake is functional before each use. It is designed to stop the chain quickly in case of kickback.
• Зөв атгах: Always hold the chainsaw firmly with both hands, with your thumbs and fingers encircling the handles.
• Cutting Position: Maintain a balanced stance. Do not overreach. Cut at waist height or below if possible.

Image 2.1: The chain brake lever, which activates the kickback protection system, shown in the engaged (stop) position.

3. Бүтээгдэхүүн дууссанview

The Einhell GE-LC 36/35 Li Solo is a powerful cordless chainsaw featuring a brushless motor for extended operation and efficiency. It is part of the Einhell Power X-Change family, requiring two 18V batteries for 36V power.

3.1 Гол онцлогууд

• Brushless Motor: For enhanced power and longer run time.
• Kickback Protection System: Automatically shuts off the saw upon chain lock.
• Oregon Branded Quality Chain and Bar: 14-inch guide bar for reliable cutting performance.
• Tool-free Chain Tension Adjustment: For quick and easy adjustments.
• Automatic Chain Lubrication: Ensures consistent chain oiling during operation.
• Metal Grip Claws: For secure handling and stability during cuts.
• Soft Grip Handle: For comfortable operation.

Зураг 3.1: Ойролцоогоор view of the 14-inch Oregon branded chain and guide bar, indicating its quality and low kickback design.

Image 3.2: Detail of the metal grip claws, providing improved stability and control during cutting operations.

4. Тохиргоо

Хөрөөг ажиллуулахаасаа өмнө зөв угсарч, бэлтгэсэн эсэхийг шалгаарай.

4.1 Савлах

Carefully remove all components from the packaging. Verify that all parts are present and undamaged. Refer to the parts list in your product documentation for a complete inventory.

4.2 Батерей суурилуулах

The GE-LC 36/35 Li Solo requires two 18V Einhell Power X-Change batteries (not included). Ensure batteries are fully charged before use.

1. Locate the battery compartments on the chainsaw.
2. Slide each charged battery into its respective compartment until it clicks securely into place.
3. To remove, press the release button on the battery and pull it out.

Image 4.1: Hands demonstrating the correct method for inserting a Power X-Change battery into the chainsaw's battery slot.

Image 4.2: A graphic clearly stating that the battery and charger are not included with the 'Solo' version of the product.

4.3 Chain and Bar Assembly & Tensioning

The chainsaw features tool-free chain tension adjustment.

1. Гинжин тоормосыг салгасан эсэхийг шалгаарай.
2. Loosen the side cover knob by turning it counter-clockwise.
3. Гинжийг араа болон чиглүүлэгч хөндлөвчний эргэн тойронд байрлуулж, зүсэх ирмэгийг зөв чиглэлд чиглүүлнэ.
4. Fit the guide bar and chain onto the chainsaw body, aligning the bar studs.
5. Tighten the side cover knob slightly.
6. Adjust chain tension by turning the tensioning wheel (usually located near the side cover knob) until the chain is snug against the guide bar but can still be pulled freely by hand. There should be no more than 2-3mm of sag in the middle of the bar.
7. Fully tighten the side cover knob.

Image 4.3: A visual representation of the tool-free chain tensioning mechanism, highlighting the ease of adjustment without additional tools.

4.4 Chain Oil Filling

The chainsaw has an automatic chain lubrication system, but the oil reservoir must be filled before use.

1. Гинж хөрөөг тэгш гадаргуу дээр байрлуул.
2. Unscrew the oil tank cap (refer to Image 4.4).
3. Fill the reservoir with high-quality chain and bar oil. Do not use waste oil or motor oil.
4. Тагийг нь найдвартай солино.

Image 4.4: Close-up of the oil tank cap, indicating its location for refilling the automatic chain lubrication system.

5. Ашиглалтын заавар

Хөрөөгөө аюулгүй, үр дүнтэй ажиллуулахын тулд эдгээр алхмуудыг дагана уу.

5.1 Эхлэх ба зогсоох

1. Ensure batteries are installed and chain oil reservoir is full.
2. Disengage the chain brake by pulling the lever back towards the front handle.
3. Press the safety lock-off button (if present) and then squeeze the trigger switch to start the chainsaw.
4. To stop, release the trigger switch. Engage the chain brake immediately after stopping the cut or when moving between cuts.

5.2 Зүсэх техник

• Planning the Cut: Before cutting, assess the wood for stability, potential kickback, and pinch points.
• Тайралт хийх: Allow the chain to reach full speed before contacting the wood. Apply light pressure and let the saw do the work.
• Жижиг модыг тайрах: For felling, make a directional notch on the side of the desired fall, then make the felling cut from the opposite side, slightly above the notch.
• мөчрүүд: Work from the bottom up, supporting the branch to prevent pinching.

Image 5.1: A user demonstrating safe operation of the chainsaw, wearing appropriate PPE and cutting a log on a sawhorse.

6. Засвар үйлчилгээ

Тогтмол засвар үйлчилгээ нь оновчтой ажиллагааг хангаж, хөрөөний ашиглалтын хугацааг уртасгадаг.

6.1 Гинжний суналтын тохируулга

Check chain tension frequently, especially during initial use. A loose chain can derail, and a tight chain can cause excessive wear. Adjust as described in Section 4.3.

Image 6.1: Close-up of the chain tension adjustment knob, illustrating the mechanism for tool-free chain tensioning.

6.2 Гинжний тосолгооны материал

The chainsaw features automatic chain lubrication. Regularly check the oil level in the reservoir and refill as needed (refer to Section 4.4). Ensure the oil port is clear of debris.

Image 6.2: A visual representation of the automatic chain lubrication system, showing oil being dispensed onto the chain during operation.

6.3 Цэвэрлэгээ ба хадгалах

• After each use, remove batteries and clean the chainsaw thoroughly. Remove sawdust and debris from the guide bar, chain, and motor housing.
• Гинж хөрөөг хуурай, аюулгүй газар, хүүхдэд хүрэхгүй газар хадгална.
• Гинж хөрөөг хадгалах, тээвэрлэхдээ чиглүүлэгчийн тагийг үргэлж ашиглаарай.

7. Алдаа засах

Энэ хэсэгт танд тулгарч болох нийтлэг асуудлуудыг авч үзэх болно.

If problems persist, contact Einhell customer support or a qualified service technician.

8. Техникийн үзүүлэлтүүд

Image 8.1: A graphic illustrating the chain speed of 15 meters per second, indicating efficient cutting performance.

9. Баталгаат хугацаа ба дэмжлэг

For warranty information, product registration, or technical support, please refer to the official Einhell webсайт эсвэл харилцагчийн үйлчилгээний хэлтэстэй холбогдоно уу. Худалдан авалтын баримтаа худалдан авалтын баталгаа болгон хадгалаарай.

Нэмэлт тусламж авахыг хүсвэл зочилно уу Einhell official webсайт.