1. Оршил ба түүнээс дээшview
The Migatronic Focus STICK 161E PFC is an advanced inverter electrode welder designed for versatile use in assembly, maintenance, and workshop environments. It is ideal for welding steel and stainless steel, even outdoors on construction sites. Featuring a user-friendly one-button operation, it allows for easy adjustment of settings from 20 to 160 amperes. The unit also supports simple TIG welding with scratch ignition. Its Power Factor Correction (PFC) function ensures maximum energy utilization, enabling welding with long power cables or a generator as a power source, and providing approximately 25% higher welding current with only a 16 A fuse.
2. Аюулгүй ажиллагааны заавар
Always prioritize safety when operating welding equipment. Failure to follow safety precautions can result in serious injury or death.
- Нүд болон нүүрний хамгаалалт: Always wear a welding helmet with appropriate shade lenses to protect against arc flash and sparks.
- Хамгаалалтын хувцас: Wear flame-resistant clothing, gloves, and sturdy footwear to protect against burns and electrical shock.
- Агааржуулалт: Ensure adequate ventilation to remove welding fumes, which can be hazardous to your health. Work in a well-ventilated area or use fume extraction equipment.
- Гал түймрээс урьдчилан сэргийлэх: Keep a fire extinguisher nearby. Remove all flammable materials from the welding area. Sparks and hot slag can travel long distances.
- Цахилгаан цочрол: Do not touch live electrical parts. Ensure the welding machine is properly grounded. Inspect cables for damage before each use.
- Ажлын талбай: Keep the work area clean, dry, and free of clutter. Do not weld in damp эсвэл нойтон нөхцөл.
- Цилиндрийн аюулгүй байдал: If using gas cylinders for TIG welding, secure them properly and handle with care.
3. Багцын агуулга
Савыг задлахдаа дараах бүх зүйл багтсан эсэхийг шалгана уу.
- Migatronic Focus STICK 161E PFC unit
- Electrode cable
- Газрын кабель
- Цахилгааны залгуур
Хэрэв ямар нэг зүйл дутуу эсвэл эвдэрсэн бол дилертэйгээ яаралтай холбоо барина уу.
4. Бүтээгдэхүүний онцлог
- Ideal for assembly, maintenance, and workshop applications.
- Capable of welding steel and stainless steel.
- Intuitive one-button operation for current adjustment (20-160 A).
- Supports simple TIG welding with scratch ignition.
- Equipped with Power Factor Correction (PFC) for efficient energy use, allowing operation with long power cables or generators.
- Flexible polarity options on the electrode holder for welding with both basic and rutile electrodes.
5. Тохиргоо
Follow these steps to set up your Migatronic Focus STICK 161E PFC welder:
- Байршил: Place the welding machine on a stable, level, and non-flammable surface. Ensure adequate space around the unit for ventilation.
- Connect Ground Cable: Connect the ground cable to the negative (-) terminal on the front panel of the welder. Secure the ground clamp ажлын хэсэг эсвэл гагнуурын ширээнд холбож, цахилгаан холбоо барих сайн байдлыг хангана.
- Connect Electrode Cable: Connect the electrode cable to the positive (+) terminal on the front panel. Insert the electrode into the electrode holder. For specific electrode types (basic/rutile), you may need to reverse polarity (connect electrode cable to negative and ground cable to positive). Consult your electrode manufacturer's recommendations.
- Эрчим хүчийг холбох: Ensure the welder's power switch is in the OFF position. Connect the power plug to a suitable 230 V +/-15% mains outlet with a 16 A fuse. The PFC function allows for stable operation even with long extension cords or a generator.
Figure 5.1: Migatronic Focus STICK 161E PFC unit with connected electrode and ground cables.
6. Ашиглалтын заавар
This section outlines the basic operation of your welding machine.
- Асаах: Turn the main power switch to the ON position. The machine will perform a self-check.
- Гагнуурын гүйдлийг тохируулах: Use the single control knob on the front panel to set the desired welding current. The range is from 20 to 160 amperes. Refer to your electrode manufacturer's recommendations for optimal current settings for your specific electrode diameter and material thickness.
- Electrode Polarity: Ensure the electrode and ground cables are connected to the correct terminals (+/-) based on the type of electrode you are using (basic or rutile).
- TIG Welding (Scratch Ignition): For TIG welding, connect a TIG torch (not included) to the appropriate terminal and ensure a gas supply if required. Initiate the arc by scratching the tungsten electrode lightly against the workpiece.
- Гагнуурын ажил эхлэх: Once settings are configured and safety precautions are in place, you can begin your welding task.
Зураг 6.1: Ойрын зураг view of the control panel, showing the current adjustment knob and electrode terminals.
7. Засвар үйлчилгээ
Тогтмол засвар үйлчилгээ нь таны гагнуурын машины урт наслалт, оновчтой ажиллагааг баталгаажуулдаг.
- Цэвэрлэгээ: Periodically clean the exterior of the machine with a dry, soft cloth. Ensure ventilation openings are free from dust and debris. Do not use solvents or abrasive cleaners.
- Кабелийн үзлэг: Regularly inspect all cables (power, electrode, ground) for cuts, cracks, or signs of wear. Replace damaged cables immediately to prevent electrical hazards.
- Терминал холболтууд: Check that all cable connections to the machine are tight and secure. Loose connections can cause overheating and poor performance.
- Хадгалах: Store the welding machine in a clean, dry, and dust-free environment when not in use. Protect it from extreme temperatures and humidity.
8. Алдаа засах
Энэ хэсэг нь танд тулгарч болох нийтлэг асуудлуудын шийдлүүдийг өгдөг.
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Машин асахгүй байна. | No power from outlet; power switch off; internal fuse tripped. | Check power outlet and circuit breaker. Ensure power switch is ON. Contact service if problem persists. |
| Гагнуурын нум байхгүй. | Poor ground connection; incorrect polarity; electrode not making contact; machine in thermal overload. | Газардуулга clamp has good contact. Verify correct polarity. Check electrode contact. Allow machine to cool down if overload indicator is on. |
| Weak or unstable arc. | Оролтын хэмжээ багаtage; incorrect current setting; worn electrode. | Check power supply. Adjust current setting. Replace electrode. |
| Machine overheats. | Ажлын мөчлөг хэтэрсэн; агааржуулалт муу; агааржуулалтын нүхийг хаасан. | Allow machine to cool. Ensure adequate ventilation. Clear any obstructions from air vents. |
For issues not listed here or if troubleshooting steps do not resolve the problem, please contact Migatronic customer support or an authorized service center.
9. Техникийн үзүүлэлтүүд
| Тодорхойлолт | Үнэ цэнэ |
|---|---|
| Mains Voltage | 230 В +/-15% |
| Гал хамгаалагч | 16 А |
| Duty Cycle 40 °C 100% | 110 А / 24.4 В. |
| Duty Cycle 40 °C 60% | 130 А / 25.2 В. |
| Нээлттэй хэлхээ Voltage | 85 В |
| Одоогийн хүрээ | 20-160 А |
| Хамгаалалтын анги | IP 23S |
| Хэмжээ (L x W x H) | 230 x 150 x 380 мм |
| Жин | 6.3 кг |
| Үйлдвэрлэгч | Мигатроник |
| Хэсгийн дугаар | 79337042 |
10. Баталгаат хугацаа ба дэмжлэг
For warranty information, technical support, or service inquiries regarding your Migatronic Focus STICK 161E PFC welder, please contact Migatronic customer service directly or refer to the warranty card included with your purchase. You may also reach out to your authorized Migatronic dealer for assistance.
Please have your product model and serial number (if applicable) ready when contacting support.
