Танилцуулга
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your PEDROLLO JSWm/2CX self-priming water pump. Please read these instructions carefully before installation or use and retain them for future reference.
Зураг 1: PEDROLLO JSWm/2CX Self-Priming Water Pump. This image shows the blue-colored pump unit with its motor housing and pump body, designed for efficient water transfer.
Аюулгүй байдлын мэдээлэл
Насос гэмтэх, гэмтэхээс урьдчилан сэргийлэхийн тулд дараах аюулгүй байдлын урьдчилан сэргийлэх арга хэмжээг үргэлж дагаж мөрдөнө үү.
- Ensure the pump is installed by a qualified professional.
- Ямар нэгэн засвар үйлчилгээ хийхээсээ өмнө цахилгааныг салга.
- Шатамхай эсвэл идэмхий шингэнтэй хамт шахуургыг ажиллуулж болохгүй.
- Шахуургыг хөлдөх температураас хамгаална.
- Цахилгааны холболтын зөв газардуулгыг шалгана уу.
Бүтээгдэхүүн дууссанview
The PEDROLLO JSWm/2CX is a self-priming centrifugal pump designed for reliable water transfer. It is suitable for pumping clean water and liquids that are not chemically aggressive to the pump's components. Its self-priming capability allows it to draw water even when air is present in the suction line, making it ideal for domestic water supply, small to medium autoclave tank systems, and garden irrigation.
Гол онцлогууд:
- Self-priming design for efficient operation.
- Suitable for clean water and non-aggressive liquids.
- Robust construction with stainless steel components.
- Designed for continuous duty in domestic and garden applications.
Тохиргоо ба суурилуулалт
Proper installation is crucial for the pump's performance and longevity. Consult a qualified technician for installation.
- Байршил: Install the pump in a dry, well-ventilated area, protected from direct sunlight and freezing temperatures. Ensure adequate space for maintenance.
- Суурилуулалт: Securely fasten the pump to a stable, level surface using appropriate bolts to minimize vibration.
- Дамжуулах хоолой:
- Use pipes of adequate diameter to minimize friction losses.
- Ensure all connections are airtight, especially on the suction side, to prevent air ingress.
- Шахуурга руу хог хаягдал орохоос сэргийлж, үндсэн чанарыг нь хадгалахын тулд сорох хоолойн төгсгөлд шүүлтүүр бүхий хөл хавхлагыг суурилуулна.
- Install a gate valve on both the suction and discharge sides for isolation during maintenance.
- Цахилгааны холболт:
- Connect the pump to a suitable power supply (220-230V, 50Hz) as indicated on the motor's data plate.
- Ensure the electrical circuit is protected by a residual current device (RCD) and an appropriately rated circuit breaker.
- Verify proper grounding according to local electrical codes.
- Эхлэх: Before initial startup, completely fill the pump casing and the suction line with clean water through the priming port. This is essential for self-priming pumps to initiate operation.
Ашиглалтын заавар
- Анхны эхлэл: After installation and priming, open the discharge valve fully. Switch on the power supply. The pump should start and begin to draw water.
- Тасралтгүй ажиллагаа: Monitor the pump for unusual noises or vibrations. Ensure the pump is not running dry, as this can cause severe damage.
- Унтраах: To stop the pump, switch off the power supply. If the pump is part of an automatic system (e.g., with a pressure switch), it will start and stop automatically based on demand.
- Температурын хязгаар:
- Liquid temperature: up to +40 °C.
- Ambient temperature: -10 °C to +40 °C.
Засвар үйлчилгээ
Regular maintenance ensures optimal performance and extends the pump's lifespan. Always disconnect power before maintenance.
- Тогтмол шалгалтууд: Inspect the pump and piping for leaks, corrosion, or damage.
- Шүүлтүүр цэвэрлэх: Periodically clean the foot valve strainer to prevent blockages and maintain flow.
- Өвөлжилт: In areas prone to freezing, drain the pump completely and store it in a warm, dry place, or insulate it adequately to prevent damage from ice expansion.
- Моторын үзлэг: Хэт халалтаас урьдчилан сэргийлэхийн тулд хөдөлгүүрийн хөргөлтийн сэрвээ нь тоос шороо, хог хаягдлаас цэвэрлэгдсэн эсэхийг шалгаарай.
Алдааг олж засварлах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Насос асахгүй байна | No power supply; Motor overload; Seized impeller. | Check power connection and circuit breaker; Reset thermal overload; Contact service technician. |
| Pump runs but no water is delivered | Pump not primed; Air leak in suction line; Foot valve clogged; Suction lift too high. | Re-prime the pump; Check all suction connections for leaks; Clean foot valve strainer; Reduce suction lift if possible. |
| Reduced flow or pressure | Partial blockage in piping; Worn impeller; Air in system. | Inspect and clear piping; Contact service technician for impeller replacement; Bleed air from system. |
| Хэт их чимээ шуугиан эсвэл чичиргээ | Cavitation (air in water); Loose mounting; Bearing wear. | Check for air leaks and ensure proper priming; Tighten mounting bolts; Contact service technician. |
Үзүүлэлтүүд
| Параметр | Үнэ цэнэ |
|---|---|
| Загвар | JSWm/2CX |
| Брэнд | Педролло |
| Эрчим хүч (HP) | 1 HP |
| Ботьtage / Давтамж | 220-230V / 50Hz |
| Хамгийн их урсгалын хурд | Минутанд 70 литр |
| Шингэн температурын хүрээ | Up to +40 °C |
| Орчны температурын хүрээ | -10 хэмээс +40 хэм хүртэл |
| Материал | Stainless Steel (pump body components) |
| ASIN | B07HMZ2DKQ |
| Олон улсын нийтлэлийн код | 08052230012515 |
Note: The specification for "Power: 220 Watts" found in some product listings may refer to a specific component or a different metric. The pump's performance is rated at 1 HP.
Баталгаат болон дэмжлэг
For warranty information, technical support, or spare parts, please contact your authorized Pedrollo dealer or visit the official Pedrollo webсайт. Худалдан авалтын баримтаа худалдан авалтын баталгаа болгон хадгалаарай.
Үйлдвэрлэгч: PEDROLLO
