Танилцуулга
This manual provides comprehensive instructions for the safe and efficient use of your Paulmann MaxLED 79797 RGBW Controller. This device allows you to control Paulmann MaxLED RGBW light strips, enabling functions such as switching, dimming, and changing light colors and effects via the included wireless remote control. The controller operates without requiring direct line-of-sight to the remote, offering a range of up to 30 meters.
Аюулгүй байдлын чухал заавар
- Суулгах, ажиллуулахын өмнө бүх зааврыг анхааралтай уншина уу.
- Энэ гарын авлагыг цаашид лавлах зорилгоор хадгална уу.
- Энэ бүтээгдэхүүн нь зөвхөн дотор ашиглахад зориулагдсан (IP20 үнэлгээ). Чийг эсвэл хэт өндөр температурт бүү өртүүл.
- Суурилуулалт, засвар үйлчилгээ хийхээс өмнө цахилгаан тэжээлийг салгасан эсэхийг шалгаарай.
- Only use with Paulmann MaxLED RGBW strips and compatible 24V power supplies.
- Do not attempt to open or modify the controller or remote control. This will void the warranty.
- Батерейг хүүхдэд хүрэхгүй газар хадгал. Ашигласан батерейг хариуцлагатайгаар устга.
Багцын агуулга
Бүх бүрэлдэхүүн хэсгүүд багцад байгаа эсэхийг шалгана уу:
- 1x Paulmann MaxLED RGBW Controller (Model 79797)
- 1x Утасгүй алсын удирдлага
- 1x Assembly Instructions (this manual)
Image: The MaxLED RGBW Controller and its wireless remote control. The controller is a small white rectangular unit with a cable, and the remote is an oval-shaped white device with various buttons and a color wheel.
Image: Diagram showing the MaxLED RGBW Controller and remote control with their approximate dimensions. The controller measures 22.5x85x45mm and the remote 20x110x53mm. A 150mm cable connects the controller to the LED strip.
Тохиргоо ба суурилуулалт
Follow these steps for proper installation of your MaxLED RGBW Controller:
- Суурилуулалтын талбайг бэлтгэх: Ensure the surface where the LED strip will be mounted is clean, dry, and free of dust.
- LED туузыг холбоно уу: Connect your Paulmann MaxLED RGBW strip to the output cable of the controller. The system uses an easy plug-in connection. Ensure the connectors are securely fastened.
- Цахилгаан хангамжийг холбох: Connect a compatible 24V Paulmann power supply (not included) to the input side of the MaxLED RGBW Controller.
- Хянагчийг суурилуулах: The controller is designed for hidden installation. Place it in a discreet location where it is protected from physical damage and moisture, but still allows for proper signal transmission from the remote (up to 30m range).
- Асаах: Once all connections are secure, plug the power supply into a suitable electrical outlet.
- Pairing the Remote Control (if necessary): The remote control is usually pre-paired. If not, refer to the "Operating Instructions" section for pairing procedures.
Image: This image illustrates the MaxLED expandable component system, highlighting three key aspects: "Easy to connect" (showing a hand connecting an LED strip), "Easy to mount" (showing an LED strip being applied to a surface), and "Easy to control" (showing the remote control). This demonstrates the simplicity of the setup process.
Ашиглалтын заавар
The wireless remote control allows full command over your MaxLED RGBW strips.
Алсын удирдлагын функцууд:
Зураг: Нарийвчилсан view of the MaxLED RGBW remote control, showing its various buttons and the central color wheel. The remote features power, brightness, mode, speed, and color selection controls.
- Асаах товч (O): Press to turn the LED strips On or Off.
- Гэрэлт байдлын хяналт (B +/-): Use the '+' button to increase brightness and '-' to decrease brightness.
- Өнгөт дугуй: Touch the color wheel to select a desired static color for your LED strips.
- Mode Selection (M): Cycle through various pre-programmed light effects and color changing modes.
- Speed Control (S +/-): When in a dynamic mode, use the '+' button to increase the speed of the effect and '-' to decrease it.
Алсын удирдлагыг холбох:
If your remote control is not responding, it may need to be paired with the controller:
- Удирдлага асаалттай байгаа эсэхийг шалгаарай.
- Within 3 seconds of powering on the controller, press and hold the "Mode" (M) button on the remote control for a few seconds.
- The LED strips should flash to indicate successful pairing.
Засвар үйлчилгээ
Цэвэрлэгээ:
To clean the controller and remote control, gently wipe with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as this can damage the components.
Алсын удирдлагатай зайг солих:
The remote control requires batteries (type not specified in product data, typically CR2032 or similar button cell). If the remote's range decreases or it stops responding, replace the battery:
- Алсын удирдлагын ар талд байгаа зайны тасалгааг ол.
- Open the compartment using a small screwdriver or by sliding the cover.
- Хуучин батерейг аваад шинийг оруулаад зөв туйлшралыг (+/-) шалгана уу.
- Зайны тасалгааг найдвартай хаа.
- Хуучин батерейг орон нутгийн дүрэм журмын дагуу устгана уу.
Алдааг олж засварлах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| LED strips do not light up. | No power, loose connection, faulty power supply, remote not paired. | Check power supply connection. Ensure all cables are securely plugged in. Verify power outlet is functional. Re-pair the remote control (see Operating Instructions). |
| Алсын удирдлага хариу өгөхгүй байна. | Батарей дуусаж, удирдлага холбогдоогүй, хүрээнээс гадуур. | Replace remote control battery. Re-pair the remote control. Move closer to the controller (within 30m). |
| Өнгө нь буруу эсвэл нийцэхгүй байна. | Loose connection to LED strip, faulty LED strip. | Check the connection between the controller and the LED strip. Ensure the strip is fully compatible. |
| Dimming or effects not working. | Remote control issue, incompatible LED strip. | Ensure the remote control battery is good and it is paired. Verify the LED strip is an RGBW dimmable type. |
Үзүүлэлтүүд
| Брэнд | Полманн |
| Загварын дугаар | 79797 |
| Бүтээгдэхүүний хэмжээ (L x W x H) | 5.3 x 11 x 2 cm (Controller); 20 x 110 x 53 mm (Remote) |
| Жин | 102 грамм |
| IP үнэлгээ | IP20 (Зөвхөн дотор ашиглах) |
| Материал | Хуванцар |
| Хамгийн их Ватtage | 144 ватт |
| Ботьtage | 24 вольт |
| Гэрлийн эх үүсвэрийн төрөл | LED (for compatible strips) |
| Эрчим хүчний эх үүсвэр | AC (via external 24V power supply) |
| Онцлог шинж чанарууд | Dimmable, Variable Intensity, Remote Control, RGBW Color Change |
| Алсын удирдлагын давтамж | 2.4 GHz RF |
| Алсын удирдлагын хүрээ | Up to 30 meters (non-line-of-sight) |
| Шаардлагатай батерей (алсын удирдлага) | Тийм (оруулаагүй) |
Image: The MaxLED RGBW Controller and its remote control, emphasizing the 2.4 GHz RF wireless technology for reliable communication.
Баталгаат болон дэмжлэг
Баталгаат хугацаа:
Paulmann offers a 1-year availability for spare parts for this product. For specific warranty terms and conditions, please refer to the official Paulmann webсайт эсвэл худалдагчтайгаа холбогдоно уу.
Хэрэглэгчийн дэмжлэг:
For further assistance, technical support, or inquiries regarding your Paulmann MaxLED RGBW Controller, please visit the official Paulmann website or contact their customer service department. Contact information can typically be found on the product packaging or the Paulmann webсайт.
Полманн Webсайт: www.paulmann.com
